Mapping of QTL for Grain Yield Components Based on a DH Population in Maize.
Ontology highlight
ABSTRACT:
SUBMITTER: Yang J
PROVIDER: S-EPMC7184729 | biostudies-literature | 2020 Apr
REPOSITORIES: biostudies-literature
Publications
Mapping of QTL for Grain Yield Components Based on a DH Population in Maize.
Yang Jiwei J Liu Zonghua Z Chen Qiong Q Qu Yanzhi Y Tang Jihua J Lübberstedt Thomas T Li Haochuan H
Scientific reports 20200427 1
The elite maize hybrid Zhengdan 958 (ZD958), which has high and stable yield and extensive adaptability, is widely grown in China. To elucidate the genetic basis of yield and its related traits in this elite hybrid, a set of doubled haploid (DH) lines derived from ZD958 were evaluated in four different environments at two locations over two years, and a total of 49 quantitative trait loci (QTL) and 24 pairs of epistatic interactions related to yield and yield components were detected. Furthermor ...[more]
Similar Datasets
Project description:Chilling injury poses a serious threat to seed emergence of spring-sowing maize in China, which has become one of the main climatic limiting factors affecting maize production in China. It is of great significance to mine the key genes controlling low-temperature tolerance during seed germination and study their functions for breeding new maize varieties with strong low-temperature tolerance during germination. In this study, 176 lines of the intermated B73 × Mo17 (IBM) Syn10 doubled haploid (DH) population, which comprised 6618 bin markers, were used for QTL analysis of low-temperature germination ability. The results showed significant differences in germination related traits under optimum-temperature condition (25 °C) and low-temperature condition (10 °C) between two parental lines. In total, 13 QTLs were detected on all chromosomes, except for chromosome 5, 7, 10. Among them, seven QTLs formed five QTL clusters on chromosomes 1, 2, 3, 4, and 9 under the low-temperature condition, which suggested that there may be some genes regulating multiple germination traits at the same time. A total of 39 candidate genes were extracted from five QTL clusters based on the maize GDB under the low-temperature condition. To further screen candidate genes controlling low-temperature germination, RNA-Seq, in which RNA was extracted from the germination seeds of B73 and Mo17 at 10 °C, was conducted, and three B73 upregulated genes and five Mo17 upregulated genes were found by combined analysis of RNA-Seq and QTL located genes. Additionally, the variations of Zm00001d027976 (GLABRA2), Zm00001d007311 (bHLH transcription factor), and Zm00001d053703 (bZIP transcription factor) were found by comparison of amino sequence between B73 and Mo17. This study will provide a theoretical basis for marker-assisted breeding and lay a foundation for further revealing molecular mechanism of low-temperature germination tolerance in maize.
| S-EPMC8780824 | biostudies-literature
Project description:Key messageFour genomic regions on chromosomes 4A, 6A, 7B, and 7D were discovered, each with multiple tightly linked QTL (QTL clusters) associated with two to three yield components. The 7D QTL cluster was associated with grain yield, fertile spikelet number per spike, thousand kernel weight, and heading date. It was located in the flanking region of FT-D1, a homolog gene of Arabidopsis FLOWERING LOCUS T, a major gene that regulates wheat flowering. Genetic manipulation of yield components is an important approach to increase grain yield in wheat (Triticum aestivum). The present study used a mapping population comprised of 181 doubled haploid lines derived from two high-yielding spring wheat cultivars, UI Platinum and LCS Star. The two cultivars and the derived population were assessed for six traits in eight field trials primarily in Idaho in the USA. The six traits were grain yield, fertile spikelet number per spike, productive tiller number per unit area, thousand kernel weight, heading date, and plant height. Quantitative Trait Locus (QTL) analysis of the six traits was conducted using 14,236 single-nucleotide polymorphism (SNP) markers generated from the wheat 90 K SNP and the exome and promoter capture arrays. Of the 19 QTL detected, 14 were clustered in four chromosomal regions on 4A, 6A, 7B and 7D. Each of the four QTL clusters was associated with multiple yield component traits, and these traits were often negatively correlated with one another. As a result, additional QTL dissection studies are needed to optimize trade-offs among yield component traits for specific production environments. Kompetitive allele-specific PCR markers for the four QTL clusters were developed and assessed in an elite spring wheat panel of 170 lines, and eight of the 14 QTL were validated. The two parents contain complementary alleles for the four QTL clusters, suggesting the possibility of improving grain yield via genetic recombination of yield component loci.
| S-EPMC8263538 | biostudies-literature
Project description:QTLs for rice grain yield under reproductive stage drought stress (qDTY) identified earlier with low density markers have shown linkage drag and need to be fine mapped before their utilization in breeding programs. In this study, genotyping-by-sequencing (GBS) based high-density linkage map of rice was developed using two BC1F3 mapping populations namely Swarna*2/Dular (3929 SNPs covering 1454.68 cM) and IR11N121*2/Aus196 (1191 SNPs covering 1399.68 cM) with average marker density of 0.37 cM to 1.18 cM respectively. In total, six qDTY QTLs including three consistent effect QTLs were identified in Swarna*2/Dular while eight qDTY QTLs including two consistent effect QTLs were identified in IR11N121*2/Aus 196 mapping population. Comparative analysis revealed four stable and novel QTLs (qDTY2.4, qDTY3.3, qDTY6.3, and qDTY11.2) which explained 8.62 to 14.92% PVE. However, one of the identified stable grain yield QTL qDTY1.1 in both the populations was located nearly at the same physical position of an earlier mapped major qDTY QTL. Further, the effect of the identified qDTY1.1 was validated in a subset of lines derived from five mapping populations confirming robustness of qDTY1.1 across various genetic backgrounds/seasons. The study successfully identified stable grain yield QTLs free from undesirable linkages of tall plant height/early maturity utilizing high density linkage maps.
| S-EPMC6778106 | biostudies-literature
Project description:The current perspective of increasing global temperature makes heat stress as a major threat to wheat production worldwide. In order to identify quantitative trait loci (QTLs) associated with heat tolerance, 251 recombinant inbred lines (RILs) derived from a cross between HD2808 (heat tolerant) and HUW510 (heat susceptible) were evaluated under timely sown (normal) and late sown (heat stress) conditions for two consecutive crop seasons; 2013-14 and 2014-15. Grain yield (GY) and its components namely, grain weight/spike (GWS), grain number/spike (GNS), thousand grain weight (TGW), grain filling rate (GFR) and grain filling duration (GFD) were recorded for both conditions and years. The data collected for both timely and late sown conditions and heat susceptibility index (HSI) of these traits were used as phenotypic data for QTL identification. The frequency distribution of HSI for all the studied traits was continuous during both the years and also included transgressive segregants. Composite interval mapping identified total 24 QTLs viz., 9 (timely sown traits), 6 (late sown traits) and 9 (HSI of traits) mapped on linkage groups 2A, 2B, and 6D during both the crop seasons 2013-14 and 2014-15. The QTLs were detected for GWS (6), GNS (6), GFR (4), TGW (3), GY (3) and GFD (2). The LOD score of identified QTLs varied from 3.03 (Qtgns.iiwbr-6D) to 21.01 (Qhsitgw.iiwbr-2A) during 2014-15, explaining 11.2 and 30.6% phenotypic variance, respectively. Maximum no of QTLs were detected in chromosome 2A followed by 6D and 2B. All the QTL detected under late sown and HSI traits were identified on chromosome 2A except for QTLs associated with GFD. Fifteen out of 17 QTL detected on chromosome 2A were clustered within the marker interval between gwm448 and wmc296 and showed tight linkage with gwm122 and these were localized in 49-52 cM region of Somers consensus map of chromosome 2A i.e. within 18-59.56 cM region of chromosome 2A where no QTL related to heat stress were reported earlier. Besides, three consistent QTLs, Qgws.iiwbr-2A, Qgns.iiwbr-2A and Qgns.iiwbr-2A were also detected in all the environments in this region. The nearest QTL detected in earlier studies, QFv/Fm.cgb-2A was approximately 6cM below the presently identified QTLs region, respectively Additionally, QTLs for physiological and phenological traits and plant height under late sown and HSI of these traits were also detected on chromosome 2A. QTL for HSI of plant height and physiological maturity were located in the same genomic region of chromosome 2Awhereas QTLs for physiological and phonological traits under late sown were located 8cM and 33.5 cM below the genomic location associated with grain traits, respectively in consensus map of Somers. This QTL hot-spot region with consistent QTLs could be used to improve heat tolerance after validation.
| S-EPMC5736223 | biostudies-literature
Project description:The world population is growing rapidly, and food shortage remains a critical issue. Quantitative trait locus (QTL) mapping is a statistical analytical method that uses both phenotypic and genotypic data. The purpose of QTL mapping is to determine the exact gene location for various complex traits. Increasing grain weight is a way to increase yield in rice. Genes related to grain size were mapped using the Samgang/Nagdong double haploid (SNDH) populations. Grain sizes were diversely distributed in SNDH 113 populations, and OsBRKq1 was detected on chromosome 1 in an analysis of QTL mapping that used 1000 grain weight, grain length, and grain width. OsBRKq1 exhibited high sequence similarity with the brassinosteroid leucine-rich repeat-receptor kinases of Arabidopsis thaliana and Zea mays. It was also predicted to have a similar function because of its high homology. OsBRKq1 interacts with various grain-size control genes. Among the SNDH populations, the analysis of the relative expression level during the panicle formation stage of OsBRKq1 in panicles of SNDH117, which has the largest grain size, and SNDH6, which has the smallest grain size, the relative expression level was significantly increased in SNDH117 panicles. SNDH populations have been advancing generations for 10 years; various genetic traits have been fixed and are currently being used as bridging parents. Therefore, the stable expression level of OsBRKq1 was confirmed via QTL mapping. In the future, OsBRKq1 can be effectively used to increase the yield of rice and solve food problems by increasing the size of seeds.
| S-EPMC7956666 | biostudies-literature
Project description:High yield is the primary objective of maize breeding. Genomic dissection of grain yield and yield-related traits contribute to understanding the yield formation and improving the yield of maize. In this study, two genome-wide association study (GWAS) methods and genomic prediction were made on an association panel of 309 inbred lines. GWAS analyses revealed 22 significant trait-marker associations for grain yield per plant (GYP) and yield-related traits. Genomic prediction analyses showed that reproducing kernel Hilbert space (RKHS) outperformed the other four models based on GWAS-derived markers for GYP, ear weight, kernel number per ear and row, ear length, and ear diameter, whereas genomic best linear unbiased prediction (GBLUP) showed a slight superiority over other modes in most subsets of the trait-associated marker (TAM) for thousand kernel weight and kernel row number. The prediction accuracy could be improved when significant single-nucleotide polymorphisms were fitted as the fixed effects. Integrating information on population structure into the fixed model did not improve the prediction performance. For GYP, the prediction accuracy of TAMs derived from fixed and random model Circulating Probability Unification (FarmCPU) was comparable to that of the compressed mixed linear model (CMLM). For yield-related traits, CMLM-derived markers provided better accuracies than FarmCPU-derived markers in most scenarios. Compared with all markers, TAMs could effectively improve the prediction accuracies for GYP and yield-related traits. For eight traits, moderate- and high-prediction accuracies were achieved using TAMs. Taken together, genomic prediction incorporating prior information detected by GWAS could be a promising strategy to improve the grain yield of maize.
| S-EPMC8319912 | biostudies-literature
Project description:BackgroundGrain weight/size influences not only grain yield (GY) but also nutritional and appearance quality and consumer preference in Tartary buckwheat. The identification of quantitative trait loci (QTLs)/genes for grain weight/size is an important objective of Tartary buckwheat genetic research and breeding programs.ResultsHerein, we mapped the QTLs for GY, 1000-grain weight (TGW), grain length (GL), grain width (GW) and grain length-width ratio (L/W) in four environments using 221 recombinant inbred lines (XJ-RILs) derived from a cross of 'Xiaomiqiao × Jinqiaomai 2'. In total, 32 QTLs, including 7 for GY, 5 for TGW, 6 for GL, 11 for GW and 3 for L/W, were detected and distributed in 24 genomic regions. Two QTL clusters, qClu-1-3 and qClu-1-5, located on chromosome Ft1, were revealed to harbour 7 stable major QTLs for GY (qGY1.2), TGW (qTGW1.2), GL (qGL1.1 and qGL1.4), GW (qGW1.7 and qGW1.10) and L/W (qL/W1.2) repeatedly detected in three and above environments. A total of 59 homologues of 27 known plant grain weight/size genes were found within the physical intervals of qClu-1-3 and qClu-1-5. Six homologues, FtBRI1, FtAGB1, FtTGW6, FtMADS1, FtMKK4 and FtANT, were identified with both non-synonymous SNP/InDel variations and significantly differential expression levels between the two parents, which may play important roles in Tatary buckwheat grain weight/size control and were chosen as core candidate genes for further investigation.ConclusionsTwo stable major QTL clusters related to grain weight/size and six potential key candidate genes were identified by homology comparison, SNP/InDel variations and qRT‒qPCR analysis between the two parents. Our research provides valuable information for improving grain weight/size and yield in Tartary buckwheat breeding.
| S-EPMC9878770 | biostudies-literature
Project description:The Zea Mays BIG GRAIN 1 HOMOLOG 1 (ZM-BG1H1) was ectopically expressed in maize. Elite commercial hybrid germplasm was yield tested in diverse field environment locations representing commercial models. Yield was measured in 101 tests across all 4 events, 26 locations over 2 years, for an average yield gain of 355 kg/ha (5.65 bu/ac) above control, with 83% tests broadly showing yield gains (range +2272 kg/ha to -1240 kg/ha), with seven tests gaining more than one metric ton per hectare. Plant and ear height were slightly elevated, and ear and tassel flowering time were delayed one day, but ASI was unchanged, and these traits did not correlate to yield gain. ZM-BG1H1 overexpression is associated with increased ear kernel row number and total ear kernel number and mass, but individual kernels trended slightly smaller and less dense. The ZM-BG1H1 protein is detected in the plasma membrane like rice OS-BG1. Five predominant native ZM-BG1H1 alleles exhibit little structural and expression variation compared to the large increased expression conferred by these ectopic alleles.
| S-EPMC7589417 | biostudies-literature
Project description:In the Southern Great Plains, wheat cultivars have been selected for a combination of outstanding yield and drought tolerance as a long-term breeding goal. To understand the underlying genetic mechanisms, this study aimed to dissect the quantitative trait loci (QTL) associated with yield components and kernel traits in two wheat cultivars `TAM 112' and `Duster' under both irrigated and dryland environments. A set of 182 recombined inbred lines (RIL) derived from the cross of TAM 112/Duster were planted in 13 diverse environments for evaluation of 18 yield and kernel related traits. High-density genetic linkage map was constructed using 5,081 single nucleotide polymorphisms (SNPs) from genotyping-by-sequencing (GBS). QTL mapping analysis detected 134 QTL regions on all 21 wheat chromosomes, including 30 pleiotropic QTL regions and 21 consistent QTL regions, with 10 QTL regions in common. Three major pleiotropic QTL on the short arms of chromosomes 2B (57.5 - 61.6 Mbps), 2D (37.1 - 38.7 Mbps), and 7D (66.0 - 69.2 Mbps) colocalized with genes Ppd-B1, Ppd-D1, and FT-D1, respectively. And four consistent QTL associated with kernel length (KLEN), thousand kernel weight (TKW), plot grain yield (YLD), and kernel spike-1 (KPS) (Qklen.tamu.1A.325, Qtkw.tamu.2B.137, Qyld.tamu.2D.3, and Qkps.tamu.6A.113) explained more than 5% of the phenotypic variation. QTL Qklen.tamu.1A.325 is a novel QTL with consistent effects under all tested environments. Marker haplotype analysis indicated the QTL combinations significantly increased yield and kernel traits. QTL and the linked markers identified in this study will facilitate future marker-assisted selection (MAS) for pyramiding the favorable alleles and QTL map-based cloning.
| S-EPMC9768232 | biostudies-literature
Project description:BackgroundAlfalfa (Medicago sativa L.) is an important forage crop grown worldwide. Alfalfa is called the "queen of forage crops" due to its high forage yield and nutritional characteristics. The aim of this study was to undertake quantitative trait loci (QTL) mapping of yield and yield-related traits in an F1 population of two alfalfa varieties that differ in their yield and yield-related traits.ResultsWe constructed a high-density linkage map using single nucleotide polymorphism (SNP) markers generated by restriction-site associated DNA sequencing (RAD-seq). The linkage map contains 4346 SNP and 119 simple sequence repeat (SSR) markers, with 32 linkage groups for each parent. The average marker distances were 3.00 and 1.32 cM, with coverages of 3455 cM and 4381 cM for paternal and maternal linkage maps, respectively. Using these maps and phenotypic data, we identified a total of 21 QTL for yield and yield components, including five for yield, five for plant height, five for branch number, and six for shoot diameter. Among them, six QTL were co-located for more than one trait. Five QTL explained more than 10% of the phenotypic variation.ConclusionsWe used RAD-seq to construct a linkage map for alfalfa that greatly enhanced marker density compared to previous studies. This high-density linkage map of alfalfa is a useful reference for mapping yield-related traits. Identified yield-related loci could be used to validate their usefulness in developing markers for maker-assisted selection in breeding populations to improve yield potential in alfalfa.
| S-EPMC6487053 | biostudies-literature