Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Plasma-Assisted Immobilization of a Phosphonium Salt and Its Use as a Catalyst in the Valorization of CO2.

ABSTRACT: The first plasma-assisted immobilization of an organocatalyst, namely a bifunctional phosphonium salt in an amorphous hydrogenated carbon coating, is reported. This method makes the requirement for prefunctionalized supports redundant. The immobilized catalyst was characterized by solid-state 13 C and 31 P NMR spectroscopy, SEM, and energy-dispersive X-ray spectroscopy. The immobilized catalyst (1 mol %) was employed in the synthesis of cyclic carbonates from epoxides and CO2 . Notably, the efficiency of the plasma-treated catalyst on SiO2 was higher than those of the SiO2 support impregnated with the catalyst and even the homogeneous counterpart. After optimization of the reaction conditions, 13 terminal and four internal epoxides were converted with CO2 to the respective cyclic carbonates in yields of up to 99 %. Furthermore, the possibility to recycle the immobilized catalyst was evaluated. Even though the catalyst could be reused, the yields gradually decreased from the third run. However, this is the first example of the recycling of a plasma-immobilized catalyst, which opens new possibilities in the recovery and reuse of catalysts.

SUBMITTER: Hu Y

PROVIDER: S-EPMC7186948 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Plasma-assisted CO2 methanation: effects on the low-temperature activity of an Ni-Ce catalyst and reaction performance.

Project description:Ni-Ce three-dimensional material with macropore diameter of 146.6 ± 8.4 nm was synthesized and used as a methanation catalyst. Firstly, H2 reduction of the catalyst was conducted in the thermal fixed bed and plasma reactor, respectively, then X-ray diffraction (XRD) and CO2 temperature programmed desorption experiments on the two reduced samples were carried out to reveal the plasma effect on the catalyst's physico-chemical properties. It was found that plasma reduction created more abundant basic sites for CO2 adsorption, in particular the medium basic sites were even doubled compared with the thermal-reduced catalysts. The plasma-reduced catalyst exhibited excellent low-temperature activity, ca 50-60°C lower than the thermal catalyst (the maximum CO2 conversion point). Based on the optimum reduced catalyst, plasma effect in the reactor level was further investigated under high gas hour space velocity of approximately 50 000 h-1. The plasma reactor showed higher CO2 conversion capacity and efficiency than the thermal reactor.

| S-EPMC6837228 | biostudies-literature

Unprecedented Mechanochemical Synthesis and Heterogenization of a C-Scorpionate Au(III) Catalyst for Microwave-Assisted Biomass Valorization.

Project description:The transformation of biomass, a carbon resource presenting a huge potential to produce valuable chemicals, requires the search for sustainable catalytic routes. This work proposes the microwave-assisted oxidation of biomass -derived substrates, such as glycerol and the furfural derivatives 5-(hydroxymethyl)furfural (HMF) and 5-hydroxymethyl-2-furancarboxylic acid (HFCA), using the C-scorpionate dichloro-gold(III) complex [AuCl2(κ2-Tpm)]Cl (Tpm = HCpz3; pz = pyrazol-1-yl) as a catalyst, as prepared and supported on graphene, in solvent-free conditions. The unprecedented application of a mechanochemical procedure (in a planetary ball mill, in solid state) to synthesize a C-scorpionate complex, the [AuCl2(κ2-Tpm)]Cl, is disclosed. The immobilization of [AuCl2(κ2-Tpm)]Cl on graphene was performed using different methods, including some (e.g., microwave irradiation and liquid assisted grinding) for the first time. The structural properties and the performance of the prepared catalytic materials are presented and discussed.

| S-EPMC8839393 | biostudies-literature

Synthetic utility of an isolable nucleoside phosphonium salt.

Project description:The reaction of O6-benzyl-3',5'-bis- O-( tert-butyldimethylsilyl)-2'-deoxyxanthosine with 1H-benzotriazol-1-yloxy-tris(dimethylamino)phosphonium hexafluorophosphate (BOP) yielded the nucleoside C-2 tris(dimethylamino)phosphonium hexafluorophosphate salt as a stable, isolable species. This is in contrast to reactions of inosine nucleosides with BOP, where the in situ formed phosphonium salts undergo subsequent reaction to yield O6-(benzotriazol-1-yl)inosine derivatives. The phosphonium salt obtained from the 2'-deoxyxanthosine derivative can be effectively used to synthesize N2-modified 2'-deoxyguanosine analogues. Using this salt, a new synthesis of an acrolein-2'-deoxyguanosine adduct has also been accomplished.

| S-EPMC2952172 | biostudies-literature

Valorization of a plant ?-amylase: Immobilization and dataset on the kinetic process.

Project description:The data presented in this article are related to the research article titled "Immobilization nd topochemical mechanism of a new ?-amylase extracted from Pergularia tomentosa" (Lahmar et al., 2017) [1]. This article documented information on the determination of the molecular weight of the ?-amylase, the method of its immobilization and a comparison of the kinetic mechanism between the free and the immobilized forms by a mathematical method. Fresh Pergularia tomentosa was collected from Tunisia and a special method for ?-amylase extraction was followed (Yotova et al., 2000) [2]. Public dissemination of this dataset will allow further analyses of the data.

| S-EPMC5723269 | biostudies-other

Enhancing CO2-Valorization Using Clostridium autoethanogenum for Sustainable Fuel and Chemicals Production.

Project description:Acetogenic bacteria can convert waste gases into fuels and chemicals. Design of bioprocesses for waste carbon valorization requires quantification of steady-state carbon flows. Here, steady-state quantification of autotrophic chemostats containing Clostridium autoethanogenum grown on CO2 and H2 revealed that captured carbon (460 ± 80 mmol/gDCW/day) had a significant distribution to ethanol (54 ± 3 C-mol% with a 2.4 ± 0.3 g/L titer). We were impressed with this initial result, but also observed limitations to biomass concentration and growth rate. Metabolic modeling predicted culture performance and indicated significant metabolic adjustments when compared to fermentation with CO as the carbon source. Moreover, modeling highlighted flux to pyruvate, and subsequently reduced ferredoxin, as a target for improving CO2 and H2 fermentation. Supplementation with a small amount of CO enabled co-utilization with CO2, and enhanced CO2 fermentation performance significantly, while maintaining an industrially relevant product profile. Additionally, the highest specific flux through the Wood-Ljungdahl pathway was observed during co-utilization of CO2 and CO. Furthermore, the addition of CO led to superior CO2-valorizing characteristics (9.7 ± 0.4 g/L ethanol with a 66 ± 2 C-mol% distribution, and 540 ± 20 mmol CO2/gDCW/day). Similar industrial processes are commercial or currently being scaled up, indicating CO-supplemented CO2 and H2 fermentation has high potential for sustainable fuel and chemical production. This work also provides a reference dataset to advance our understanding of CO2 gas fermentation, which can contribute to mitigating climate change.

| S-EPMC7135887 | biostudies-literature

Black indium oxide a photothermal CO2 hydrogenation catalyst.

Project description:Nanostructured forms of stoichiometric In2O3 are proving to be efficacious catalysts for the gas-phase hydrogenation of CO2. These conversions can be facilitated using either heat or light; however, until now, the limited optical absorption intensity evidenced by the pale-yellow color of In2O3 has prevented the use of both together. To take advantage of the heat and light content of solar energy, it would be advantageous to make indium oxide black. Herein, we present a synthetic route to tune the color of In2O3 to pitch black by controlling its degree of non-stoichiometry. Black indium oxide comprises amorphous non-stoichiometric domains of In2O3-x on a core of crystalline stoichiometric In2O3, and has 100% selectivity towards the hydrogenation of CO2 to CO with a turnover frequency of 2.44?s-1.

| S-EPMC7229034 | biostudies-literature

Light assisted antibody immobilization for bio-sensing.

Project description:Ultrashort UV pulses at 258 nm with repetition rate of 10 kHz have been used to irradiate buffer solution of antibody. The tryptophan residues strongly absorb this radiation thus becoming capable to disrupt the disulfide bridges located next to them. Due to their high reactivity the opened bridges can anchor a gold plate more efficiently than other sites of the macromolecule giving rise to preferential orientations of the variable part of the antibody. UV irradiation has been applied to anchor antiIgG antibody to the electrode of a Quartz Crystal Microbalance (QCM) that lends itself as a sensor, the antibody acting as the bio-receptor. An increase of the QCM sensitivity and of the linear range has been measured when the antibody is irradiated with UV laser pulses. The photo-induced reactions leading to disulfide bridge breakage have been analyzed by means of a chemical assay that confirms our explanation. The control of disulfide bridges by UV light paves the way to important applications for sensing purpose since cysteine in combination with tryptophan can act as a hook to link refractory bio-receptors to surfaces.

| S-EPMC3207388 | biostudies-other

NHC-CDI Betaine Adducts and Their Cationic Derivatives as Catalyst Precursors for Dichloromethane Valorization.

Project description:Zwitterionic adducts of N-heterocyclic carbene and carbodiimide (NHC-CDI) are an emerging class of organic compounds with promising properties for applications in various fields. Herein, we report the use of the ICyCDI(p-Tol) betaine adduct (1a) and its cationic derivatives 2a and 3a as catalyst precursors for the dichloromethane valorization via transformation into high added value products CH2Z2 (Z = OR, SR or NR2). This process implies selective chloride substitution of dichloromethane by a range of nucleophiles Na+Z- (preformed or generated in situ from HZ and an inorganic base) to yield formaldehyde-derived acetals, dithioacetals, or aminals with full selectivity. The reactions are conducted in a multigram-scale under very mild conditions, using dichloromethane both as a reagent and solvent, and very low catalyst loading (0.01 mol %). The CH2Z2 derivatives were isolated in quantitative yields after filtration and evaporation, which facilitates recycling the dichloromethane excess. Mechanistic studies for the synthesis of methylal CH2(OMe)2 rule out organocatalysis as being responsible for the CH2 transfer, and a phase-transfer catalysis mechanism is proposed instead. Furthermore, we observed that 1a and 2a react with NaOMe to form unusual isoureate ethers, which are the actual phase-transfer catalysts, with a strong preference for sodium over other alkali metal nucleophiles.

| S-EPMC8650018 | biostudies-literature

Dual Valorization of Lignin as a Versatile and Renewable Matrix for Enzyme Immobilization and (Flow) Bioprocess Engineering.

Project description:Lignin has emerged as an attractive alternative in the search for more eco-friendly and less costly materials for enzyme immobilization. In this work, the terephthalic aldehyde-stabilization of lignin is carried out during its extraction to develop a series of functionalized lignins with a range of reactive groups (epoxy, amine, aldehyde, metal chelates). This expands the immobilization to a pool of enzymes (carboxylase, dehydrogenase, transaminase) by different binding chemistries, affording immobilization yields of 64-100 %. As a proof of concept, a ω-transaminase reversibly immobilized on polyethyleneimine-lignin is integrated in a packed-bed reactor. The stability of the immobilized biocatalyst is tested in continuous-flow deamination reactions and maintains the same conversion for 100 cycles. These results outperform previous stability tests carried out with the enzyme covalently immobilized on methacrylic resins, with the advantage that the reversibility of the immobilized enzyme allows recycling and reuse of lignin beyond the enzyme inactivation. Additionally, an in-line system also based on lignin is added into the downstream process to separate the reaction products by catch-and-release. These results demonstrate a fully closed-loop sustainable flow-biocatalytic system based exclusively on lignin.

| S-EPMC8457236 | biostudies-literature

Ultraefficient homogeneous catalyst for the CO2-to-CO electrochemical conversion.

Project description:A very efficient electrogenerated Fe(0) porphyrin catalyst was obtained by substituting in tetraphenylporphyrin two of the opposite phenyl rings by ortho-, ortho'-phenol groups while the other two are perfluorinated. It proves to be an excellent catalyst of the CO2-to-CO conversion as to selectivity (the CO faradaic yield is nearly quantitative), overpotential, and turnover frequency. Benchmarking with other catalysts, through catalytic Tafel plots, shows that it is the most efficient, to the best of our knowledge, homogeneous molecular catalyst of the CO2-to-CO conversion at present. Comparison with another Fe(0) tetraphenylporphyrin bearing eight ortho-, ortho'-phenol functionalities launches a general strategy where changes in substituents will be designed so as to optimize the operational combination of all catalyst elements of merit.

| S-EPMC4210317 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data