Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Pressure-Assisted Fabrication of Perovskite Solar Cells.

ABSTRACT: This paper presents the results of a combined experimental and analytical/computational study of the effects of pressure on photoconversion efficiencies of perovskite solar cells (PSCs). First, an analytical model is used to predict the effects of pressure on interfacial contact in the multilayered structures of PSCs. The PSCs are then fabricated before applying a range of pressures to the devices to improve their interfacial surface contacts. The results show that the photoconversion efficiencies of PSCs increase by ~40%, for applied pressures between 0 and ~7?MPa. However, the photoconversion efficiencies decrease with increasing pressure beyond ~7?MPa. The implications of the results are discussed for the fabrication of efficient PSCs.

SUBMITTER: Oyelade OV

PROVIDER: S-EPMC7188881 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Pressure-Assisted Fabrication of Perovskite Solar Cells.

Oyelade O V OV Oyewole O K OK Oyewole D O DO Adeniji S A SA Ichwani R R Sanni D M DM Soboyejo W O WO

Scientific reports 20200428 1

This paper presents the results of a combined experimental and analytical/computational study of the effects of pressure on photoconversion efficiencies of perovskite solar cells (PSCs). First, an analytical model is used to predict the effects of pressure on interfacial contact in the multilayered structures of PSCs. The PSCs are then fabricated before applying a range of pressures to the devices to improve their interfacial surface contacts. The results show that the photoconversion efficienci ...[more]

PMID: 32346049

Similar Datasets

Boosting Long-Term Stability of Pure Formamidinium Perovskite Solar Cells by Ambient Air Additive Assisted Fabrication.

Project description:Due to the high industrial interest for perovskite-based photovoltaic devices, there is an urgent need to fabricate them under ambient atmosphere, not limited to low relative humidity (RH) conditions. The formamidinium lead iodide (FAPI) perovskite α-black phase is not stable at room temperature and is challenging to stabilize in an ambient environment. In this work, we show that pure FAPI perovskite solar cells (PSCs) have a dramatic increase of device long-term stability when prepared under ambient air compared to FAPI PSCs made under nitrogen, both fabricated with N-methylpyrrolidone (NMP). The T 80 parameter, the time in which the efficiency drops to 80% of the initial value, increases from 21 (in N2) to 112 days (in ambient) to 145 days if PbS quantum dots (QDs) are introduced as additives in air-prepared FAPI PSCs. Furthermore, by adding methylammonium chloride (MACl) the power conversion efficiency (PCE) reaches 19.4% and devices maintain 100% of the original performance for at least 53 days. The presence of Pb-O bonds only in the FAPI films prepared in ambient conditions blocks the propagation of α- to δ-FAPI phase conversion. Thus, these results open the way to a new strategy for the stabilization in ambient air toward perovskite solar cells commercialization.

| S-EPMC8506569 | biostudies-literature

Recent Advances in Inverted Perovskite Solar Cells: Designing and Fabrication.

Project description:Inverted perovskite solar cells (PSCs) have been extensively studied by reason of their negligible hysteresis effect, easy fabrication, flexible PSCs and good stability. The certified photoelectric conversion efficiency (PCE) achieved 23.5% owing to the formed lead-sulfur (Pb-S) bonds through the surface sulfidation process of perovskite film, which gradually approaches the performance of traditional upright structure PSCs and indicates their industrial application potential. However, the fabricated devices are severely affected by moisture, high temperature and ultraviolet light due to the application of organic materials. Depending on nitrogen, cost of protection may increase, especially for the industrial production in the future. In addition, the inverted PSCs are found with a series of issues compared with the traditional upright PSCs, such as nonradiative recombination of carriers, inferior stability and costly charge transport materials. Thus, the development of inverted PSCs is systematically reviewed in this paper. The design and fabrication of charge transport materials and perovskite materials, enhancement strategies (e.g., interface modification and doping) and the development of all-inorganic inverted devices are discussed to present the indicator for development of efficient and stable inverted PSCs.

| S-EPMC9569998 | biostudies-literature

Laser-Assisted Ultrafast Fabrication of Crystalline Ta-Doped TiO<sub>2</sub> for High-Humidity-Processed Perovskite Solar Cells.

Project description:A titanium dioxide (TiO2) compact film is a widely used electron transport layer (ETL) for n-i-p planar perovskite solar cells (PSCs). However, TiO2 sufferers from poor electrical conductivity, leading to high energy loss at the perovskite/ETL/transparent conductive oxide interface. Doping the TiO2 film with alkali- and transition-metal elements is an effective way to improve its electrical conductivity. The conventional method to prepare these metal-doped TiO2 films commonly requires time-consuming furnace treatments at 450-600 °C for 30 min to 3 h. Herein, a rapid one-step laser treatment is developed to enable doping of tantalum (Ta) in TiO2 (Ta-TiO2) and to simultaneously induce the crystallization of TiO2 films from its amorphous precursor to an anatase phase. The PSCs based on the Ta-TiO2 films treated with the optimized fiber laser (1070 nm) processing parameters (21 s with a peak processing temperature of 800-850 °C) show enhanced photovoltaic performance in comparison to that of the device fabricated using furnace-treated films at 500 °C for 30 min. The ambient-processed planar PSCs fabricated under high relative humidity (RH) of 50-70% display power conversion efficiencies (PCEs) of 18.34% and 16.04% for devices based on Cs0.1FA0.9PbI3 and CH3NH3PbI3 absorbers, respectively. These results are due to the improved physical and chemical properties of the Ta-TiO2 films treated by the optimal laser process in comparison to those for the furnace process. The laser process is rapid, simple, and potentially scalable to produce metal-doped TiO2 films for efficient PSCs.

| S-EPMC9098116 | biostudies-literature

Novel Solvent-free Perovskite Deposition in Fabrication of Normal and Inverted Architectures of Perovskite Solar Cells.

Project description:We introduced a new approach to deposit perovskite layer with no need for dissolving perovskite precursors. Deposition of Solution-free perovskite (SFP) layer is a key method for deposition of perovskite layer on the hole or electron transport layers that are strongly sensitive to perovskite precursors. Using deposition of SFP layer in the perovskite solar cells would extend possibility of using many electron and hole transport materials in both normal and invert architectures of perovskite solar cells. In the present work, we synthesized crystalline perovskite powder followed by successful deposition on TiO2 and cuprous iodide as the non-sensitve and sensitive charge transport layers to PbI2 and CH3NH3I solution in DMF. The post compressing step enhanced the efficiency of the devices by increasing the interface area between perovskite and charge transport layers. The 9.07% and 7.71% cell efficiencies of the device prepared by SFP layer was achieved in respective normal (using TiO2 as a deposition substrate) and inverted structure (using CuI as deposition substrate) of perovskite solar cell. This method can be efficient in large-scale and low cost fabrication of new generation perovskite solar cells.

| S-EPMC5027556 | biostudies-literature

Eliminating Halogen Vacancies Enables Efficient MACL-Assisted Formamidine Perovskite Solar Cells.

Project description:Methylammonium chloride (MACl) additive is almost irreplaceable in high-performance formamidine perovskite photovoltaics. Nevertheless, Some of the problems that can arise from adding MACl are rarely mentioned. Herein, it is proposed for the first time that the addition of MACl would cause the non-stoichiometric ratio in the perovskite film, resulting in the halogen vacancy. It is demonstrated that the non-synchronous volatilization of methylamine cations and chloride ions leads to the formation of halogen vacancy defects. To solve this problem, the NH4 HCOO is introduced into the perovskite precursor solution to passivate the halogen vacancy. The HCOO- ions have a strong force with lead ions and can fill the halogen vacancy defects. Consequently, the champion devices' power conversion efficiency (PCE) can be improved from 21.23% to 23.72% with negligible hysteresis. And the unencapsulated device can still retain >90% of the initial PCE even operating in N2 atmosphere for over 1200 h. This work illustrates another halogen defect source in the MACl-assisted formamidine perovskite photovoltaics and provides a new route to obtain high-performance perovskite solar cells.

| S-EPMC10870047 | biostudies-literature

Multi-Walled Carbon Nanotube-Assisted Encapsulation Approach for Stable Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) are regarded as the next-generation thin-film energy harvester, owing to their high performance. However, there is a lack of studies on their encapsulation technology, which is critical for resolving their shortcomings, such as their degradation by oxygen and moisture. It is determined that the moisture intrusion and the heat trapped within the encapsulating cover glass of PSCs influenced the operating stability of the devices. Therefore, we improved the moisture and oxygen barrier ability and heat releasing capability in the passivation of PSCs by adding multi-walled carbon nanotubes to the epoxy resin used for encapsulation. The 0.5 wt% of carbon nanotube-added resin-based encapsulated PSCs exhibited a more stable operation with a ca. 30% efficiency decrease compared to the ca. 63% decrease in the reference devices over one week under continuous operation. Specifically, the short-circuit current density and the fill factor, which are affected by moisture and oxygen-driven degradation, as well as the open-circuit voltage, which is affected by thermal damage, were higher for the multi-walled carbon nanotube-added encapsulated devices than the control devices, after the stability test.

| S-EPMC8399998 | biostudies-literature

Ion Exchange/Insertion Reactions for Fabrication of Efficient Methylammonium Tin Iodide Perovskite Solar Cells.

Project description:The low toxicity, narrow bandgaps, and high charge-carrier mobilities make tin perovskites the most promising light absorbers for low-cost perovskite solar cells (PSCs). However, the development of the Sn-based PSCs is seriously hampered by the critical issues of poor stability and low power conversion efficiency (PCE) due to the facile oxidation of Sn2+ to Sn4+ and poor film formability of the perovskite films. Herein, a synthetic strategy is developed for the fabrication of methylammonium tin iodide (MASnI3) film via ion exchange/insertion reactions between solid-state SnF2 and gaseous methylammonium iodide. In this way, the nucleation and crystallization of MASnI3 can be well controlled, and a highly uniform pinhole-free MASnI3 perovskite film is obtained. More importantly, the detrimental oxidation can be effectively suppressed in the resulting MASnI3 film due to the presence of a large amount of remaining SnF2. This high-quality perovskite film enables the realization of a PCE of 7.78%, which is among the highest values reported for the MASnI3-based solar cells. Moreover, the MASnI3 solar cells exhibit high reproducibility and good stability. This method provides new opportunities for the fabrication of low-cost and lead-free tin-based halide perovskite solar cells.

| S-EPMC7201265 | biostudies-literature

Recycled Utilization of a Nanoporous Au Electrode for Reduced Fabrication Cost of Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) using metal electrodes have been regarded as promising candidates for next-generation photovoltaic devices because of their high efficiency, low fabrication temperature, and low cost potential. However, the complicated and rigorous thermal deposition process of metal contact electrodes remains a challenging issue for reducing the energy pay-back period in commercial PSCs, as the ubiquitous one-time use of a contact electrode wastes limited resources and pollutes the environment. Here, a nanoporous Au film electrode fabricated by a simple dry transfer process is introduced to replace the thermally evaporated Au electrode in PSCs. A high power conversion efficiency (PCE) of 19.0% is demonstrated in PSCs with the nanoporous Au film electrode. Moreover, the electrode is recycled more than 12 times to realize a further reduced fabrication cost of PSCs and noble metal materials consumption and to prevent environmental pollution. When the nanoporous Au electrode is applied to flexible PSCs, a PCE of 17.3% and superior bending durability of ?98.5% after 1000 cycles of harsh bending tests are achieved. The nanoscale pores and the capability of the porous structure to impede crack generation and propagation enable the nanoporous Au electrode to be recycled and result in excellent bending durability.

| S-EPMC7080531 | biostudies-literature

Fabrication of efficient planar perovskite solar cells using a one-step chemical vapor deposition method.

Project description:Organometallic trihalide perovskites are promising materials for photovoltaic applications, which have demonstrated a rapid rise in photovoltaic performance in a short period of time. We report a facile one-step method to fabricate planar heterojunction perovskite solar cells by chemical vapor deposition (CVD), with a solar power conversion efficiency of up to 11.1%. We performed a systematic optimization of CVD parameters such as temperature and growth time to obtain high quality films of CH3NH3PbI3 and CH3NH3PbI(3-x)Clx perovskite. Scanning electron microscopy and time resolved photoluminescence data showed that the perovskite films have a large grain size of more than 1 micrometer, and carrier life-times of 10 ns and 120 ns for CH3NH3PbI3 and CH3NH3PbI(3-x)Clx, respectively. This is the first demonstration of a highly efficient perovskite solar cell using one step CVD and there is likely room for significant improvement of device efficiency.

| S-EPMC4585726 | biostudies-literature

A prenucleation strategy for ambient fabrication of perovskite solar cells with high device performance uniformity.

Project description:Humidity is known to be inimical to the halide perovskites and thus typically avoided during fabrication. The poor fundamental understanding of chemical interactions between water and the precursors hampers the further development of perovskite fabrication in ambient atmosphere. Here, we disclose a key finding that the ambient water could promote the formation of lead complexes, which when uncontrolled would make their way into large intermediate fibrillar crystallites and thus discontinuous perovskite films unfavorable for photovoltaics among others. To counter this effect, a prenucleation strategy is proposed, which embodies the controlled burst of profuse intermediate nuclei. Consequently, we are able to obtain a compact and uniform perovskite layer, which affords high efficiency perovskite solar cells. More excitingly, the solar cells show high performance uniformity, demonstrating the distinctive advantages of our prenucleation strategy. This work sheds light on developing reliable and cost-effective fabrication methods for industrial production of perovskite solar cells.

| S-EPMC7035260 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data