Soft sensors for a sensing-actuation system with high bladder voiding efficiency.
Ontology highlight
ABSTRACT:
SUBMITTER: Arab Hassani F
PROVIDER: S-EPMC7195140 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:We report the development of a new class of miniature all-polymer flow sensors that closely mimic the intricate morphology of the mechanosensory ciliary bundles in biological hair cells. An artificial ciliary bundle is achieved by fabricating bundled polydimethylsiloxane (PDMS) micro-pillars with graded heights and electrospinning polyvinylidenefluoride (PVDF) piezoelectric nanofiber tip links. The piezoelectric nature of a single nanofiber tip link is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Rheology and nanoindentation experiments are used to ensure that the viscous properties of the hyaluronic acid (HA)-based hydrogel are close to the biological cupula. A dome-shaped HA hydrogel cupula that encapsulates the artificial hair cell bundle is formed through precision drop-casting and swelling processes. Fluid drag force actuates the hydrogel cupula and deflects the micro-pillar bundle, stretching the nanofibers and generating electric charges. Functioning with principles analogous to the hair bundles, the sensors achieve a sensitivity and threshold detection limit of 300?mV/(m/s) and 8??m/s, respectively. These self-powered, sensitive, flexible, biocompatibale and miniaturized sensors can find extensive applications in navigation and maneuvering of underwater robots, artificial hearing systems, biomedical and microfluidic devices.
| S-EPMC5020657 | biostudies-literature
Project description:There are numerous works that report wirelessly controlling the locomotion of soft robots through a single actuation method of light or magnetism. However, coupling multiple driving modes to improve the mobility of robots is still in its infancy. Here, we present a soft multi-legged millirobot that can move, climb a slope, swim and detect a signal by near-infrared irradiation (NIR) light or magnetic field dual actuation. Due to the design of the feet structure, our soft millirobot incorporates the advantages of a single actuation mode of light or magnetism. Furthermore, it can execute a compulsory exercise to sense a signal and analyze the ambience fluctuation in a narrow place. This work provides a novel alternative for soft robots to achieve multimode actuation and signal sensing.
| S-EPMC7998303 | biostudies-literature
Project description:The rigidity and relatively primitive modes of operation of catheters equipped with sensing or actuation elements impede their conformal contact with soft-tissue surfaces, limit the scope of their uses, lengthen surgical times and increase the need for advanced surgical skills. Here, we report materials, device designs and fabrication approaches for integrating advanced electronic functionality with catheters for minimally invasive forms of cardiac surgery. By using multiphysics modelling, plastic heart models and Langendorff animal and human hearts, we show that soft electronic arrays in multilayer configurations on endocardial balloon catheters can establish conformal contact with curved tissue surfaces, support high-density spatiotemporal mapping of temperature, pressure and electrophysiological parameters and allow for programmable electrical stimulation, radiofrequency ablation and irreversible electroporation. Integrating multimodal and multiplexing capabilities into minimally invasive surgical instruments may improve surgical performance and patient outcomes.
| S-EPMC8021456 | biostudies-literature
Project description:Motion in plants often relies on dynamic helical systems as seen in coiling tendrils, spasmoneme springs, and the opening of chiral seedpods. Developing nanotechnology that would allow molecular-level phenomena to drive such movements in artificial systems remains a scientific challenge. Herein, we describe a soft device that uses nanoscale information to mimic seedpod opening. The system exploits a fundamental mechanism of stimuli-responsive deformation in plants, namely that inflexible elements with specific orientations are integrated into a stimuli-responsive matrix. The device is operated by isomerization of a light-responsive molecular switch that drives the twisting of strips of liquid-crystal elastomers. The strips twist in opposite directions and work against each other until the pod pops open from stress. This mechanism allows the photoisomerization of molecular switches to stimulate rapid shape changes at the macroscale and thus to maximize actuation power.
| S-EPMC5363340 | biostudies-literature
Project description:Exoskeletons are robots that closely interact with humans and that are increasingly used for different purposes, such as rehabilitation, assistance in the activities of daily living (ADLs), performance augmentation or as haptic devices. In the last few decades, the research activity on these robots has grown exponentially, and sensors and actuation technologies are two fundamental research themes for their development. In this review, an in-depth study of the works related to exoskeletons and specifically to these two main aspects is carried out. A preliminary phase investigates the temporal distribution of scientific publications to capture the interest in studying and developing novel ideas, methods or solutions for exoskeleton design, actuation and sensors. The distribution of the works is also analyzed with respect to the device purpose, body part to which the device is dedicated, operation mode and design methods. Subsequently, actuation and sensing solutions for the exoskeletons described by the studies in literature are analyzed in detail, highlighting the main trends in their development and spread. The results are presented with a schematic approach, and cross analyses among taxonomies are also proposed to emphasize emerging peculiarities.
| S-EPMC8839165 | biostudies-literature
Project description:The improvement of soft inflatable microactuators using an actuation conversion mechanism is presented in terms of high-output generation; a bending inflatable microactuator with the conversion mechanism is designed to generate high-output bending motion. The designed microactuator consists of a pneumatic balloon on a base film and a conversion film over the balloon and ribs on the backside of the base film. A conversion film converts the inflating motion of a pneumatic balloon into a bending motion. The fabricated microactuator with a pneumatic balloon of 13 mm in diameter is 16 mm?×?40 mm?×?850 ?m. A 25 ?m thick polyimide film is used as a conversion film over the pneumatic balloon because polyimide film is both non-stretchable and flexible. An array of Si ribs (15 mm?×?40 mm?×?400 ?m) is integrated on the backside of the base film. Analysis of the microactuators with and without the conversion mechanism indicates that the output performance is improved with the addition of the conversion mechanism, as designed. As a result, the microactuator with the conversion film generates a maximum force of 1.72 N at 80 kPa, whereas the microactuator without the conversion film generates a maximum force of 0.15 N at 40 kPa. The improved microactuator can provide 4.2 mN/mm3 as the force density. In addition to fundamental characterization, the performance characteristics of the actuators are examined by combining the fundamental results.
| S-EPMC7374717 | biostudies-literature
Project description:IntroductionWe sought to evaluate the reliability and validity of a new, illustrated questionnaire, the bladder bowel dysfunction symptom score (BBDSS) in the assessment of overactive bladder (OAB) and bladder bowel dysfunction (BBD).MethodsThe BBDSS questionnaire consisted of 12 structured questions. This pilot study was designed with two principal groups of questions: one group to assess bladder symptoms and the other to assess bowel dysfunction during the preceding month. Each question had three possible answers, with each answer being assigned a severity score. We prospectively collected previously untreated patients referred to our voiding dysfunction clinic for the first time. A control group of healthy children was recruited to assess the reliability of the BBDSS questionnaire. The provisional diagnosis was collected from patients' charts at the time of presentation.ResultsThe questionnaire was administered to 92 children (44 in the affected group and 48 in the control group). The age at presentation was similar in both groups (17 months or nine years, nine months). The mean total score for the affected group was 8.7 (3-14) while it was 1.19 (0-5) for the control group (p<0.001). There was a strong correlation, between the total BBDSS score and both groups (r=0.88, p<0.001). Using the ROC curve, the BBDSS was found to be an excellent tool in differentiating normal from affected patients (area under the curve [AUC]=0.98, p<0.001). When the total BBDSS score was ≥6, the positive predictive value was 1, with a negative predictive value of 0.89. The defecation part of the BBDSS was a good tool in differentiating OAB from BBD patients (AUC=0.89, p<0.001). No patient with OAB had a bowel score >3.ConclusionsThe BBDSS is a reliable and valid instrument in the diagnosis of voiding dysfunction. The questionnaire was easily administered by parents or children. Moreover, it can differentiate between OAB and BBD.
| S-EPMC10697707 | biostudies-literature
Project description:Developing small-scale soft continuum robots with large-angle steering capacity and high-precision manipulation offers broad opportunities in various biomedical settings. However, existing continuum robots reach the bottleneck in actuation on account of the contradiction among small size, compliance actuation, large tender range, high precision, and small dynamic error. Herein, a 3D-printed millimeter-scale soft continuum robot with an ultrathin hollow skeleton wall (300 μm) and a large inner-to-outer ratio (0.8) is reported. After coating a thin ferromagnetic elastomer layer (≈100-150 μm), the proposed soft continuum robot equipped with hybrid actuation (tendon- and magnetic-driven mode) achieves large-angle (up to 100°) steering and high-precision (low to 2 μm for static positioning) micromanipulation simultaneously. Specifically, the robot implements an ultralow dynamic tracking error of ≈10 μm, which is ≈30-fold improved than the state of art. Combined with a microneedle/knife or nasopharyngeal swab, the robot reveals the potential for versatile biomedical applications, such as drug injection on the target tissue, diseased tissue ablation, and COVID-19 nasopharyngeal sampling. The proposed millimeter-scale soft continuum robot presents remarkable advances in large-range and high-precise actuation, which provides a new method for miniature continuum robot design and finds broad applications in biomedical engineering.
| S-EPMC7744893 | biostudies-literature
Project description:The majority of existing tactile sensors are designed to measure a particular range of force with a fixed sensitivity. However, some applications require tactile sensors with multiple task-relevant sensitivities at multiple ranges of force sensing. Inspired by the human tactile sensing capability, this paper proposes a novel soft tactile sensor based on mechanical metamaterials which exhibits multiple sensitivity regimes due to the step-by-step locking behaviour of its heterogenous multi-layered structure. By tuning the geometrical design parameters of the collapsible layers, each layer experiences locking behaviour under different ranges of force which provides different sensitivity of the sensor at different force magnitude. The integration of a magnetic-based transduction method with the proposed structure results in high design degrees of freedom for realising the desired contact force sensitivities and corresponding force sensing ranges. A systematic design procedure is proposed to select appropriate design parameters to produce the desired characteristics. Two example designs of the sensor structure were fabricated using widely available benchtop 3D printers and tested for their performance. The results showed the capability of the sensor in providing the desired characteristics in terms of sensitivity and force range and being realised in different shapes, sizes and number of layers in a single structure. The proposed multi-sensitivity soft tactile sensor has a great potential to be used in a wide variety of applications where different sensitivities of force measurement is required at different ranges of force magnitudes, from robotic manipulation and human-machine interaction to biomedical engineering and health-monitoring.
| S-EPMC8677735 | biostudies-literature
Project description:The continuous monitoring of hemodynamics attainable with wireless implantable devices would improve the treatment of vascular diseases. However, demanding requirements of size, wireless operation, and compatibility with endovascular procedures have limited the development of vascular electronics. Here, we report an implantable, wireless vascular electronic system, consisting of a multimaterial inductive stent and printed soft sensors capable of real-time monitoring of arterial pressure, pulse rate, and flow without batteries or circuits. Developments in stent design achieve an enhanced wireless platform while matching conventional stent mechanics. The fully printed pressure sensors demonstrate fast response times, high durability, and sensing at small bending radii. The device is monitored via inductive coupling at communication distances notably larger than prior vascular sensors. The wireless electronic system is validated in artery models, while minimally invasive catheter implantation is demonstrated in an in vivo rabbit study. Overall, the vascular system offers an adaptable framework for comprehensive monitoring of hemodynamics.
| S-EPMC9094660 | biostudies-literature