3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhang M
PROVIDER: S-EPMC7209991 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Architected metals and ceramics with nanoscale cellular designs, e.g., nanolattices, are currently subject of extensive investigation. By harnessing extreme material size effects, nanolattices demonstrated classically inaccessible properties at low density, with exceptional potential for superior lightweight materials. This study expands the concept of nanoarchitecture to dense metal/ceramic composites, presenting co-continuous architectures of three-dimensional printed pyrolytic carbon shell reinforcements and electrodeposited nickel matrices. We demonstrate ductile compressive deformability with elongated ultrahigh strength plateaus, resulting in an extremely high combination of compressive strength and strain energy absorption. Simultaneously, property-to-weight ratios outperform those of lightweight nanolattices. Superior to cellular nanoarchitectures, interpenetrating nanocomposites may combine multiple size-dependent characteristics, whether mechanical or functional, which are radically antagonistic in existing materials. This provides a pathway toward previously unobtainable multifunctionality, extending far beyond lightweight structure applications.
| S-EPMC9385151 | biostudies-literature
Project description:The damping capacity and mechanical properties of Mg-6Al-1Zn alloy after heat treatment were investigated. The damping characteristics of un-heat-treated, solution treated, and aged Mg-6Al-1Zn specimens were determined by measuring the damping ratio and the logarithmic decrement of free vibrations of a bending beam clamped at one side. The microstructural evaluations confirmed that the β-Mg17Al12 phase was reprecipitated after aging and increased with an increase in aging time. The peak level of damping ratio and logarithmic decrement was obtained after 34 hr of aging time, over which the damping capacity declined according to increasing amount of strong pining points.
| S-EPMC4396996 | biostudies-other
Project description:The operation of mechanical equipment inevitably generates vibrations and noise, which are harmful to not only the human body but also to the equipment in use. Damping materials, which can convert mechanical energy into thermal energy, possess excellent damping properties in the glass transition region and can alleviate the problems caused by vibration and noise. However, these materials mainly rely on petroleum-based resources, and their glass transition temperatures (Tg) are lower than room temperature. Therefore, bio-based materials with high damping properties at room temperature must be designed for sustainable development. Herein, we demonstrate the fabrication of bio-based millable polyurethane (BMPU)/hindered phenol composites that could overcome the challenges of sustainable development and exhibit high damping properties at room temperature. BMPUs with a high Tg were prepared from modified poly (lactic acid)-based polyols, the unsaturated chain extender trimethylolpropane diallylether, and 4,4′-diphenylmethane diisocyanate, and 3,9-Bis-{1,1-dimethyl-2[β-(3-tert-butyl-4-hydroxy-5-methylphenyl-)propionyloxy]ethyl}-2,4,8,10-tetraoxaspiro [5,5]-undecane (AO-80) was added to prepare BMPU/AO-80 composites. Finally, the properties of the BMPUs and BMPU/AO-80 composites were systematically evaluated. After adding 30 phr of AO-80, the Tg and maximum loss factor (tan δmax) of BMPU/AO-80 composites increased from 7.8 °C to 13.5 °C and from 1.4 to 2.0, respectively. The tan δmax showed an improvement of 43%. Compared with other polyurethanes, the prepared BMPU/AO-80 composites exhibited higher damping properties at room temperature. This study proposes a new strategy to reduce society’s current dependence on fossil resources and design materials featuring high damping properties from sustainable raw materials.
| S-EPMC9223548 | biostudies-literature
Project description:Besides the unique shape memory effect and superelasticity, NiTi alloys also show excellent damping properties. However, the high damping effect is highly temperature-dependent, and only exists during cooling or heating over the temperature range where martensitic transformation occurs. As a result, expanding the temperature range of martensite transformation is an effective approach to widen the working temperature window with high damping performance. In this work, layer-structured functionally graded NiTi alloys were produced by laser powder bed fusion (L-PBF) alternating two or three sets of process parameters. The transformation behavior shows that austenite transforms gradually into martensite over a wide temperature range during cooling, and multiple transformation peaks are observed. A microstructure composed of alternating layers of B2/B19' phases is obtained at room temperature. The functionally graded sample shows high damping performance over a wide temperature range of up to 70 K, which originates from the gradual formation of the martensite phase during cooling. This work proves the potential of L-PBF to create NiTi alloys with high damping properties over a wide temperature range for damping applications.
| S-EPMC9319330 | biostudies-literature
Project description:Al-Zn-Mg-Cu-Zr-Sc alloys with different Sc contents were fabricated by casting, deformation, and T6 treatment. Deformation methods including rolling and friction-stir processing (FSP) were used to design their grain structure. A low additive amount (0.1) of Sc cannot refine the grains of the alloy with rolling and T6 treatment, and it instead coarsened the grains. The reason was the non-uniform distribution of nanosize Al3(Sc,Zr) phases that led to the occurrence of abnormal grain growth during homogenization. Meanwhile, the alloy with only 0.1Sc exhibited finer grains after FSP and T6 treatment than the alloys subjected to the same process but with higher Sc additive amount. Alloys with rolling-induced elongated grain structure exhibited better mechanical properties, and alloys with FSP-induced fine equiaxed grain structure exhibited higher high-strain and high-temperature internal friction values. These features are important performance parameters for applications in fields where vibration and noise are sensitive. The optimum additive amounts of Sc for alloys with elongated and fine equiaxed grain structures were 0.25 and 0.1, respectively.
| S-EPMC10826823 | biostudies-literature
Project description:Maize's nitrogen (N) uptake can be improved through maize-legume intercropping. N uptake mechanisms require further study to better understand how legumes affect root growth and to determine maize's absorptive capacity in maize-legume intercropping. We conducted a two-year field experiment with two N treatments (zero N (N0) and conventional N (N1)) and three planting patterns (monoculture maize (Zea mays L.) (MM), maize-soybean (Glycine max L. Merr.) strip intercropping (IMS), and maize-peanut (Arachis hypogaea L.) strip intercropping (IMP)). We sought to understand maize's N uptake mechanisms by investigating root growth and distribution, root uptake capacity, antioxidant enzyme activity, and the antioxidant content in different maize-legume strip intercropping systems. Our results showed that on average, the N uptake of maize was significantly greater by 52.5% in IMS and by 62.4% in IMP than that in MM. The average agronomic efficiency (AE) of maize was increased by 110.5 % in IMS and by 163.4 % in IMP, compared to MM. The apparent recovery efficiency (RE) of maize was increased by 22.3% in IMS. The roots of intercropped maize were extended into soybean and peanut stands underneath the space and even between the inter-rows of legume, resulting in significantly increased root surface area density (RSAD) and total root biomass. The root-bleeding sap intensity of maize was significantly increased by 22.7-49.3% in IMS and 37.9-66.7% in IMP, compared with the MM. The nitrate-N content of maize bleeding sap was significantly greater in IMS and IMP than in MM during the 2018 crop season. The glutathione (GSH) content, superoxide dismutase (SOD), and catalase (CAT) activities in the root significantly increased in IMS and IMP compared to MM. Strip intercropping using legumes increases maize's aboveground N uptake by promoting root growth and spatial distribution, delaying root senescence, and strengthening root uptake capacity.
| S-EPMC8234926 | biostudies-literature
Project description:Carbon Fibre-Reinforced Polymers (CFRPs) in aerospace applications are expected to operate in moist environments where carbon fibres have high resistance to water absorption; however, polymers do not. To develop a truly optimised structure, it is important to understand this degradation process. This study aims to expand the understanding of the role of water absorption on fibrous/polymeric structures, particularly in a matrix-dominant property, namely interlaminar strength. This work used Acoustic Emission (AE), which could be integrated into any Structural Health Monitoring System for aerospace applications, optical strain measurements, and microscopy to provide an assessment of the gradual change in failure mechanisms due to the degradation of a polymer's structure with increasing water absorption. CFRP specimens were immersed in purified water and kept at a constant temperature of 90 °C for 3, 9, 24 and 43 days. The resulting interlaminar strength was investigated through short-beam strength (SBS) testing. The SBS values decreased as immersion times were increased; the decrease was significant at longer immersion times (up to 24.47%). Failures evolved with increased immersion times, leading to a greater number of delaminations and more intralaminar cracking. Failure modes, such as crushing and multiple delaminations, were observed at longer immersion times, particularly after 24 and 43 days, where a pure interlaminar shear failure did not occur. The observed transition in failure mechanism showed that failure of aged specimens was triggered by a crushing of the upper surface plies leading to progressive delamination at multiple ply interfaces in the upper half of the specimen. The crushing occurred at a load below that required to initiate a pure shear failure and hence represents an under prediction of the true SBS of the sample. This is a common test used to assess environmental degradation of composites and these results show that conservative knockdown factors may be used in design. AE was able to distinguish different material behaviours prior to final fracture for unaged and aged specimens suggesting that it can be integrated into an aerospace asset management system. AE results were validated using optical measurements and microscopy.
| S-EPMC8271434 | biostudies-literature
Project description:Extrusion based additive manufacturing of cementitious materials has demonstrated strong potential to become widely used in the construction industry. However, the use of this technique in practice is conditioned by a feasible solution to implement reinforcement in such automated process. One of the most successful ductile materials in civil engineering, strain hardening cementitious composites (SHCC) have a high potential to be employed for three-dimensional printing. The match between the tailored brittle matrix and ductility of the fibres enables these composites to develop multiple cracks when loaded under tension. Using previously developed mixtures, this study investigates the physical and mechanical performance of printed SHCC. The anisotropic behavior of the materials is explored by means of mechanical tests in several directions and micro computed tomography tests. The results demonstrated a composite showing strain hardening behavior in two directions explained by the fibre orientation found in the printed elements. Moreover, the printing technique used also has guaranteed an enhanced bond in between the printed layers.
| S-EPMC7287622 | biostudies-literature
Project description:The root system in plants absorbs water and minerals. However, the relationship among root size, yield, and water use efficiency (WUE) is controversial. Two pot experiments were conducted to explore these relationships by using two maize varieties with contrasting root sizes and reducing the root-shoot ratio (R/S) through root pruning to eliminate genotypic effects. Maize plants were grown in an open rainout shelter under both water-sufficient and deficient conditions. Yield-related parameters, root hydraulic conductivity (Lpr), and WUE were determined. The results showed that the small root variety (XY) has a higher yield and WUE compared to large root variety (QL) under both soil moisture conditions, likely related to the higher Lpr of XY. XY also had a higher leaf water potential than QL under drought stress, indicating that small root system could provide enough water to the shoot. Further pot experiment showed that both small and large root pruning on QL (cut off about 1/5 roots, RP1; and cut off about 1/3 roots, RP2, respectively) improved WUE and Lpr, and the RP1 yield increased by 12.9% compared to the control under well-watered conditions. Root pruning decreased transpiration and increased photosynthesis. Thus, this study reveals that it is possible to increase water absorption, yield, and WUE by reducing R/S in modern maize varieties, which may be important for the future breeding of new cultivars suitable for arid regions.
| S-EPMC9460845 | biostudies-literature
Project description:One therapeutical alternative in the treatment of functional disorders is the use of printed oral splints. The mechanical properties of these materials are highly essential to their clinical effectiveness, and their performance may vary depending on factors such as cleaning, post-polymerization, or their orientation during construction. The objective of this in vitro investigation is to evaluate the effectiveness of the selected materials in terms of their biaxial flexural strength in relation to the criteria listed above. Splint materials were used in the printing of 720 discs. The printing process was carried out in different orientations in relation to the building platform. Either an automatic or manual cleaning process was performed on the samples. For post-polymerization, either an LED or Xenon light was utilized. A piston-on-three-ball test was used to measure the biaxial flexural strength (BFS) of the materials after they were stored in water for either 24 h or 60 days. The homogeneity of the data was controlled by employing the Levene method, and the differences between the groups were analyzed using the ANOVA and Bonferroni methods. After being stored for twenty-four hours, the mean BFS ranged anywhere from 79 MPa to 157 MPa. Following a period of sixty hours, the BFS exhibited a substantial drop and revealed values that ranged from 72 to 127 MPa. There was no significant difference that could be identified between the materials or between the various cleaning processes. The results of post-polymerization showed that the LED light produced higher means than the Xenon light did. In terms of position, the mean values varied greatly, with 0°'s mean value being 101 MPa, 45°'s mean value being 102 MPa, and 90°'s mean value being 115 MPa. The use of a build orientation of 90° and post-polymerization with LED light resulted in significantly increased biaxial flexural strength. According to this study, this design should be implemented in order to ensure that splint materials have the highest possible strength.
| S-EPMC10934272 | biostudies-literature