Dataset Information

Triple-Band Perfect Light Absorber Based on Hybrid Metasurface for Sensing Application.

ABSTRACT: A simple design of triple-band perfect light absorber (PLA) based on hybrid metasurface in visible region has been presented in this work, which turns out to be applicable for refractive index (RI) sensing. Distinct from previous designs, the proposed hybrid metasurface for visible PLA is only consisted of periodic silicon cross nanostructure arrays and gold substrate. The periodic silicon cross arrays deposited on the gold substrate contribute to excite the guided modes under the normal incident light illumination. According to the simulation results, it can be found that three perfect absorption peaks of 98.1%, 98.7%, and 99.6% which are located at 402.5 THz, 429.5 THz, and 471.5 THz, respectively, have been clearly observed in PLA. This triple-band perfect absorption effect could be attributed to the intrinsic loss of silicon material originated from the guided mode excitations caused by the standing waves of different orders. It has been confirmed that the perfect absorption properties of the PLA can be easily regulated by changing the geometric parameters of the unit-cell nanostructure. Furthermore, the designed PLA served as a RI sensor can achieve sensitivity of about 25.3, 41.3, and 31.9 THz /refractive index unit (RIU). It can be believed that the proposed design of PLA for RI sensing would provide great potential applications in sensing, detecting, the enhanced visible spectroscopy, etc.

SUBMITTER: Cheng Y

PROVIDER: S-EPMC7214565 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Triple-Band Perfect Light Absorber Based on Hybrid Metasurface for Sensing Application.

Cheng Yongzhi Y Chen Fu F Luo Hui H

Nanoscale research letters 20200511 1

A simple design of triple-band perfect light absorber (PLA) based on hybrid metasurface in visible region has been presented in this work, which turns out to be applicable for refractive index (RI) sensing. Distinct from previous designs, the proposed hybrid metasurface for visible PLA is only consisted of periodic silicon cross nanostructure arrays and gold substrate. The periodic silicon cross arrays deposited on the gold substrate contribute to excite the guided modes under the normal inciden ...[more]

PMID: 32394043

Similar Datasets

Project description:The geometry of the characteristic element forming the artificial structure of an electromagnetic metamaterial defines the way the metamaterial will interact with electromagnetic waves, and accordingly, how it will transmit, reflect, and absorb electromagnetic energy. Metamaterials have been discovered that can manipulate electromagnetic waves to create perfect absorption of incident electromagnetic energy using relatively simple elemental geometries. But the phenomenon is confined to very narrow frequency bandwidths owing to the mono-resonance characteristics of simple cellular structures. Complex cellular geometries based on the combination of many different fundamental building blocks may be able to constructively couple many more resonances and broaden the perfect absorption bandwidth. We describe here a metasurface based upon geometric inversion of a set of conformal mapping contours. The resulting geometry forms a nearly continuous series of perfect absorption resonances within an ultrathin (λ/165) metasurface to develop broadband absorption in a frequency range of interest for downhole chemical spectroscopy. The metasurface is derived from a geometric inversion of the Rhodonea, or more commonly called four-leaf roses, conformal mapping contours and was found to exhibit a near zero index metamaterial (NZIM) behavior. An uncooled microbolometer design is described that uses the metasurface geometry on a single VO2 thermometric substrate leading to an infrared detector with predicted maximum absorption of 99.94% at 4.3 μm and an absorption bandwidth of 170% FWHM on 15.8 μm center wavelength, coincident with important chemical spectra of downhole hydrocarbons. The infrared detector design has a predicted maximum detectivity D* = 1.5 × 109 cm[Formula: see text]/W and noise equivalent difference temperature NEDT of 70 mK at a frame rate of 60 Hz. These levels of detector performance conventionally would be achievable only with cryogenically cooled technologies and could represent a significant step in the effort towards deploying an in situ infrared chemical spectroscopy sensor into downhole logging applications.

Dataset Information

Triple-Band Perfect Light Absorber Based on Hybrid Metasurface for Sensing Application.

Publications

Triple-Band Perfect Light Absorber Based on Hybrid Metasurface for Sensing Application.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets