Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Concrete Crack Monitoring Using a Novel Strain Transfer Model for Distributed Fiber Optics Sensors.

ABSTRACT: In this paper, we study the strain transfer mechanism between a host material and an optical fiber. A new analytical model handling imperfect bonding between layers is proposed. A general expression of the crack-induced strain transfer from fractured concrete material to optical fiber is established in the case of a multilayer system. This new strain transfer model is examined through performing wedge splitting tests on concrete specimens instrumented with embedded and surface-mounted fiber optic cables. The experimental results showed the validity of the crack-induced strain expression fitted to the distributed strains measured using an Optical Backscattering Reflectometry (OBR) system. As a result, precise estimations of the crack openings next to the optical cable location were achieved, as well as the monitoring of the optical cable response through following the strain lag parameter.

SUBMITTER: Bassil A

PROVIDER: S-EPMC7218875 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Concrete Crack Monitoring Using a Novel Strain Transfer Model for Distributed Fiber Optics Sensors.

Bassil Antoine A Chapeleau Xavier X Leduc Dominique D Abraham Odile O

Sensors (Basel, Switzerland) 20200415 8

In this paper, we study the strain transfer mechanism between a host material and an optical fiber. A new analytical model handling imperfect bonding between layers is proposed. A general expression of the crack-induced strain transfer from fractured concrete material to optical fiber is established in the case of a multilayer system. This new strain transfer model is examined through performing wedge splitting tests on concrete specimens instrumented with embedded and surface-mounted fiber opti ...[more]

PMID: 32326390

Similar Datasets

Monitoring of Strain and Temperature in an Open Pit Using Brillouin Distributed Optical Fiber Sensors.

Project description:Marble quarries are quite dangerous environments in which rock falls may occur. As many workers operate in these sites, it is necessary to deal with the matter of safety at work, checking and monitoring the stability conditions of the rock mass. In this paper, some results of an innovative analysis method are shown. It is based on the combination of Distributed Optical Fiber Sensors (DOFS), digital photogrammetry through Unmanned Aerial Vehicle (UAV), topographic, and geotechnical monitoring systems. Although DOFS are currently widely used for studying infrastructures, buildings and landslides, their use in rock marble quarries represents an element of peculiarity. The complex morphologies and the intense temperature range that characterize this environment make this application original. The selected test site is the Lorano open pit which is located in the Apuan Alps (Italy); here, a monitoring system consisting of extensometers, crackmeters, clinometers and a Robotic Total Station has been operating since 2012. From DOFS measurements, strain and temperature values were obtained and validated with displacement data from topographic and geotechnical instruments. These results may provide useful fundamental indications about the rock mass stability for the safety at work and the long-term planning of mining activities.

| S-EPMC7180570 | biostudies-literature

Early Crack Detection of Reinforced Concrete Structure Using Embedded Sensors.

Project description:The damage in reinforced concrete (RC) structures can be induced either by the dynamic or static load. The inspection technologies available today have difficulty in detecting slowly progressive, locally limited damage, especially in hard-to-reach areas in the superstructure. The four-point bending test on the benchmark RC structure was used as a test of the quality and sensitivity of the embedded sensors. It allowed assessment of whether any cracking and propagation that occurs with the embedded sensors can be detected. Various methods are used for the analysis of the ultrasonic signals. By determining the feature from the ultrasonic signals, the changes in the whole structure are evaluated. The structural degradation of the RC benchmark structure was tested using various non-destructive testing methods to obtain a comprehensive decision about structural condition. It is shown that the ultrasonic sensors can detect a crack with a probability of detection of 100%, also before it is visible by the naked eye and other techniques, even if the damage is not in the direct path of the ultrasonic wave. The obtained results confirmed that early crack detection is possible using the developed methodology based on embedded and external sensors and advanced signal processing.

| S-EPMC6767232 | biostudies-literature

Optics-Free, In Situ Swelling Monitoring of Articular Cartilage with Graphene Strain Sensors.

Project description:Articular cartilage derives its load-bearing strength from the mechanical and physiochemical coupling between the collagen network and negatively charged proteoglycans, respectively. Current disease modeling approaches and treatment strategies primarily focus on cartilage stiffness, partly because indentation tests are readily accessible. However, stiffness measurements via indentation alone cannot discriminate between proteoglycan degradation versus collagen degradation, and there is a lack of methods to monitor physiochemical contributors in full-stack tissue. To decouple these contributions, here, we developed a platform that measures tissue swelling in full-depth equine cartilage explants using piezoresistive graphene strain sensors. These piezoresistive strain sensors are embedded within an elastomer bulk and have sufficient sensitivity to resolve minute, real-time changes in swelling. By relying on simple DC resistance measurements over optical techniques, our platform can analyze multiple samples in parallel. Using these devices, we found that cartilage explants under enzymatic digestion showed distinctive swelling responses to a hypotonic challenge and established average equilibrium swelling strains in healthy cartilage (4.6%), cartilage with proteoglycan loss (0.5%), and in cartilage with both collagen and proteoglycan loss (-2.6%). Combined with histology, we decoupled the pathologic swelling responses as originating either from reduced fixed charge density or from loss of intrinsic stiffness of the collagen matrix in the superficial zone. By providing scalable and in situ monitoring of cartilage swelling, our platform could facilitate regenerative medicine approaches aimed at restoring osmotic function in osteoarthritic cartilage or could be used to validate physiologically relevant swelling behavior in synthetic hydrogels.

| S-EPMC10123914 | biostudies-literature

Graphene-Based Materials as Strain Sensors in Glass Fiber/Epoxy Model Composites.

Project description:The ability of graphene-based materials to act as strain sensors in glass fiber/epoxy model composites by using Raman spectroscopy has been investigated. The strain reporting performance of two types of graphene nanoplatelets (GNPs) was compared with that of graphene produced by chemical vapor deposition (CVD). The strain sensitivity of the thicker GNPs was impeded by their limited aspect ratio and weak interaction between flakes and fibers. The discontinuity of the GNP coating and inconsistency in properties among individual platelets led to scatter in the reported strains. In comparison, continuous and homogeneous CVD grown graphene was more accurate as a strain sensor and suitable for point-by-point strain reporting. The Raman mapping results of CVD graphene and its behavior under cyclic deformation show reversible and reliable strain sensing at low strain levels (up to 0.6% matrix strain), above which interfacial sliding of the CVD graphene layer was observed through an in situ Raman spectroscopic study.

| S-EPMC7007000 | biostudies-literature

Microanchored borehole fiber optics allows strain profiling of the shallow subsurface.

Project description:Vertical deformation profiles of subterranean geological formations are conventionally measured by borehole extensometry. Distributed strain sensing (DSS) paired with fiber-optic cables installed in the ground opens up possibilities for acquiring high-resolution static and quasistatic strain profiles of deforming strata, but it is currently limited by reduced data quality due to complicated patterns of interaction between the buried cables and their surroundings, especially in upper soil layers under low confining pressures. Extending recent DSS studies, we present an improved approach using microanchored fiber-optic cables-designed to optimize ground-to-cable coupling at the near surface-for strain determination along entire lengths of vertical boreholes. We proposed a novel criterion for soil-cable coupling evaluation based on the geotechnical bearing capacity theory. We applied this enhanced methodology to monitor groundwater-related vertical motions in both laboratory and field experiments. Corroborating extensometer recordings, acquired simultaneously, validated fiber optically determined displacements, suggesting microanchored DSS as an improved means for detecting and monitoring shallow subsurface strain profiles.

| S-EPMC8080621 | biostudies-literature

Crack-induced Ag nanowire networks for transparent, stretchable, and highly sensitive strain sensors.

Project description:Crack-based strain sensor systems have been known for its high sensitivity, but suffer from the small fracture strain of the thin metal films employed in the sensor which results in its negligible stretchability. Herein, we fabricated a transparent (>90% at 550?nm wavelength), stretchable (up to 100%), and sensitive (gauge factor (GF) of 30 at 100% strain) strain gauge by depositing an encapsulated crack-induced Ag nanowire (AgNW) network on a hydroxylated poly(dimethylsiloxane) (PDMS) film. Stretching the encapsulated AgNWs/PDMS resulted in the formation of a percolation network of nanowire ligaments with abundant percolation paths. The encapsulating polymer was designed to adhere strongly to both the AgNW and PDMS. The improved adhesion ensured the resistance of the crack-induced network of AgNWs varied reversibly, stably, and sensitively when stretched and released, at strains of up to 100%. The developed sensor successfully detected human motions when applied to the skin.

| S-EPMC5554203 | biostudies-literature

Anisotropic, Wrinkled, and Crack-Bridging Structure for Ultrasensitive, Highly Selective Multidirectional Strain Sensors.

Project description:Flexible multidirectional strain sensors are crucial to accurately determining the complex strain states involved in emerging sensing applications. Although considerable efforts have been made to construct anisotropic structures for improved selective sensing capabilities, existing anisotropic sensors suffer from a trade-off between high sensitivity and high stretchability with acceptable linearity. Here, an ultrasensitive, highly selective multidirectional sensor is developed by rational design of functionally different anisotropic layers. The bilayer sensor consists of an aligned carbon nanotube (CNT) array assembled on top of a periodically wrinkled and cracked CNT-graphene oxide film. The transversely aligned CNT layer bridge the underlying longitudinal microcracks to effectively discourage their propagation even when highly stretched, leading to superior sensitivity with a gauge factor of 287.6 across a broad linear working range of up to 100% strain. The wrinkles generated through a pre-straining/releasing routine in the direction transverse to CNT alignment is responsible for exceptional selectivity of 6.3, to the benefit of accurate detection of loading directions by the multidirectional sensor. This work proposes a unique approach to leveraging the inherent merits of two cross-influential anisotropic structures to resolve the trade-off among sensitivity, selectivity, and stretchability, demonstrating promising applications in full-range, multi-axis human motion detection for wearable electronics and smart robotics.

| S-EPMC8096879 | biostudies-literature

The Effect of Encapsulation on Crack-Based Wrinkled Thin Film Soft Strain Sensors.

Project description:Practical wearable applications of soft strain sensors require sensors capable of not only detecting subtle physiological signals, but also of withstanding large scale deformation from body movement. Encapsulation is one technique to protect sensors from both environmental and mechanical stressors. We introduced an encapsulation layer to crack-based wrinkled metallic thin film soft strain sensors as an avenue to improve sensor stretchability, linear response, and robustness. We demonstrate that encapsulated sensors have increased mechanical robustness and stability, displaying a significantly larger linear dynamic range (~50%) and increased stretchability (260% elongation). Furthermore, we discovered that these sensors have post-fracture signal recovery. They maintained conductivity to the 50% strain with stable signal and demonstrated increased sensitivity. We studied the crack formation behind this phenomenon and found encapsulation to lead to higher crack density as the source for greater stretchability. As crack formation plays an important role in subsequent electrical resistance, understanding the crack evolution in our sensors will help us better address the trade-off between high stretchability and high sensitivity.

| S-EPMC7828450 | biostudies-literature

Study on Finite Element Model Updating in Highway Bridge Static Loading Test Using Spatially-Distributed Optical Fiber Sensors.

Project description:A finite model updating method that combines dynamic-static long-gauge strain responses is proposed for highway bridge static loading tests. For this method, the objective function consisting of static long-gauge stains and the first order modal macro-strain parameter (frequency) is established, wherein the local bending stiffness, density and boundary conditions of the structures are selected as the design variables. The relationship between the macro-strain and local element stiffness was studied first. It is revealed that the macro-strain is inversely proportional to the local stiffness covered by the long-gauge strain sensor. This corresponding relation is important for the modification of the local stiffness based on the macro-strain. The local and global parameters can be simultaneously updated. Then, a series of numerical simulation and experiments were conducted to verify the effectiveness of the proposed method. The results show that the static deformation, macro-strain and macro-strain modal can be predicted well by using the proposed updating model.

| S-EPMC5539721 | biostudies-other

Electrospun amplified fiber optics.

Project description:All-optical signal processing is the focus of much research aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially important for efficient signal transmission. However, the complex fabrication methods involving high-temperature processes performed in a highly pure environment slow the fabrication process and make amplified components expensive with respect to an ideal, high-throughput, room temperature production. Here, we report on near-infrared polymer fiber amplifiers working over a band of ?20 nm. The fibers are cheap, spun with a process entirely carried out at room temperature, and shown to have amplified spontaneous emission with good gain coefficients and low levels of optical losses (a few cm(-1)). The amplification process is favored by high fiber quality and low self-absorption. The found performance metrics appear to be suitable for short-distance operations, and the large variety of commercially available doping dyes might allow for effective multiwavelength operations by electrospun amplified fiber optics.

| S-EPMC4358074 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data