Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High-Yield Production of Few-Layer Graphene via New-fashioned Strategy Combining Resonance Ball Milling and Hydrothermal Exfoliation.

ABSTRACT: Graphene shows great potential applications in functional coating, electrodes, and ultrasensitive sensors, but high-yield and scalable preparation of few-layer graphene (FLG) by mechanical exfoliation method is still a formidable challenge. In this work, a novel two-step method for high-yield preparation of FLG is developed by combining resonance ball milling and hydrothermal treatment. During the resonance ball milling process, the utilization of magnetic Fe3O4 nanoparticles as a new "particle wedge" is beneficial to facilitate fragment and delamination of graphitic layers. In addition, further hydrothermal treatment can enhance ball milling product (BMP) exfoliation because of the shear force driven by the Brownian motion of various molecules at high temperature and high pressure. As expected, the two-step method can have high exfoliation efficiency up to 92% (≤10 layers). Moreover, the FLG nanosheet ink can easily achieve the formation of FLG coatings on the surface of various substrates, resulting in good electrical conductivity, which possesses potential applications in various fields including functional coating, energy storages, and electrochemical sensors, etc. Our work provides a new-fashioned strategy for mechanical large-scale production of graphene.

SUBMITTER: Yang Q

PROVIDER: S-EPMC7221951 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Millstone Exfoliation: a True Shear Exfoliation for Large-Size Few-Layer Graphene Oxide.

Project description:A millstone (MS) was introduced in the production of large-size few-layer-graphene oxide (FLGO) via true shear exfoliation in order to minimize fragmentation. The MS was constructed with two glass plates, where the top plate was designed to rotate against the stationary bottom plate, thereby generating true shear force. Mildly oxidized graphite (MOG) was used for MS exfoliation in order to obtain both good property and high yield. The rpm of rotation (10, 20, 30, 40, and 50), solution concentration (0.5, 1, and 2 mg/ml), and number of exfoliation (1, 2, and 3) were optimized by measuring the UV-vis absorption, and the effect of oxidation time (30, 60, and 90 min) was studied under the given optimum conditions. Next, the FLGO was isolated by centrifugation and characterized by TEM and AFM. The FLGO obtained was as large as ~ 10 μm in size, which was slightly smaller than the pristine graphite, suggesting a possibility of slight fragmentation. But it was still much larger than the FLGO obtained via sonication (< 1 μm), demonstrating successful MS exfoliation.

| S-EPMC6010364 | biostudies-literature

Protein-assisted scalable mechanochemical exfoliation of few-layer biocompatible graphene nanosheets.

Project description:A facile method to produce few-layer graphene (FLG) nanosheets is developed using protein-assisted mechanical exfoliation. The predominant shear forces that are generated in a planetary ball mill facilitate the exfoliation of graphene layers from graphite flakes. The process employs a commonly known protein, bovine serum albumin (BSA), which not only acts as an effective exfoliation agent but also provides stability by preventing restacking of the graphene layers. The latter is demonstrated by the excellent long-term dispersibility of exfoliated graphene in an aqueous BSA solution, which exemplifies a common biological medium. The development of such potentially scalable and toxin-free methods is critical for producing cost-effective biocompatible graphene, enabling numerous possible biomedical and biological applications. A methodical study was performed to identify the effect of time and varying concentrations of BSA towards graphene exfoliation. The fabricated product has been characterized using Raman spectroscopy, powder X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The BSA-FLG dispersion was then placed in media containing Astrocyte cells to check for cytotoxicity. It was found that lower concentrations of BSA-FLG dispersion had only minute cytotoxic effects on the Astrocyte cells.

| S-EPMC8101280 | biostudies-literature

Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene.

Project description:Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2 nm have been obtained by a mild and durative ICE. The high-quality graphene layers preserve intact basal crystal planes owing to avoidance of the degradation reaction during both intercalation and ICE. Furthermore, we reveal that the high-quality FLG ensures a remarkable lithium-storage stability (>1,000 cycles) and a large reversible specific capacity (>600 mAh g(-1)). This simple and scalable technique acquiring high-quality FLG offers considerable potential for future realistic applications.

| S-EPMC3555088 | biostudies-other

Edge-carboxylated graphene nanosheets via ball milling.

Project description:Low-cost, high-yield production of graphene nanosheets (GNs) is essential for practical applications. We have achieved high yield of edge-selectively carboxylated graphite (ECG) by a simple ball milling of pristine graphite in the presence of dry ice. The resultant ECG is highly dispersable in various solvents to self-exfoliate into single- and few-layer (? 5 layers) GNs. These stable ECG (or GN) dispersions have been used for solution processing, coupled with thermal decarboxylation, to produce large-area GN films for many potential applications ranging from electronic materials to chemical catalysts. The electrical conductivity of a thermally decarboxylated ECG film was found to be as high as 1214 S/cm, which is superior to its GO counterparts. Ball milling can thus provide simple, but efficient and versatile, and eco-friendly (CO(2)-capturing) approaches to low-cost mass production of high-quality GNs for applications where GOs have been exploited and beyond.

| S-EPMC3326447 | biostudies-literature

Few-Layer Antimonene by Liquid-Phase Exfoliation.

Project description:We report on a fast and simple method to produce highly stable isopropanol/water (4:1) suspensions of few-layer antimonene by liquid-phase exfoliation of antimony crystals in a process that is assisted by sonication but does not require the addition of any surfactant. This straightforward method generates dispersions of few-layer antimonene suitable for on-surface isolation. Analysis by atomic force microscopy, scanning transmission electron microscopy, and electron energy loss spectroscopy confirmed the formation of high-quality few-layer antimonene nanosheets with large lateral dimensions. These nanolayers are extremely stable under ambient conditions. Their Raman signals are strongly thickness-dependent, which was rationalized by means of density functional theory calculations.

| S-EPMC5113666 | biostudies-literature

One-Step Green Hydrothermal Synthesis of Few-Layer Graphene Oxide from Humic Acid.

Project description:The conventional synthesis route of graphene oxide (GOG), based on Hummers method, suffers from explosion risk, environmental concerns and a tedious synthesis process, which increases production costs and hinders its practical applications. Herein, we report a novel strategy for preparing few-layer graphene oxide (GOH) from humic acid via simple hydrothermal treatment. The formation of GOH is mainly attributed to the hydrolysis, oxidation and aromatization of humic acid under hydrothermal conditions. The as-prepared few-layer GOH has typical morphology (thin and crumpled sheets with the thickness of ~3.2 nm), crystal structure (a Raman ID/IG ratio of 1.09) and chemical composition (an X-ray Photoelectron Spectroscopy (XPS) O/C atomic ratio of 0.36) of few-layer GOG. The thermally reduced GOH (r-GOH) delivers considerable area capacitance of 28 µF·cm-2, high rate capability and low electrochemical resistance as supercapacitor electrodes. The described hydrothermal process shows great promise for the cheap, green and efficient synthesis of few-layer graphene oxide for advanced applications.

| S-EPMC5923545 | biostudies-literature

Nanocomposite Hydrogels Containing Few-Layer Graphene Sheets Prepared through Noncovalent Exfoliation Show Improved Mechanical Properties.

Project description:Hydrogels show great potential as soft materials for biomedical applications and flexible devices. However, conventional hydrogels exhibit poor mechanical strengths owing to the presence of water in their polymer networks. Therefore, improving the mechanical properties of hydrogels by controlling the chemical and physical structures that affect their macroscopic behaviors is a challenging issue. In this study, we developed a nanocomposite (NC) hydrogel that harbors exfoliated few-layer graphene sheets through noncovalent interactions. The bifunctional polymer PImQ, which contains both aromatic and cationic groups, was found to enable the direct exfoliation of graphite to few-layer graphene through π-π interactions in 2.7% yield. The poly(acrylamide)-based NC hydrogel containing the PImQ/graphene composite as a nanofiller shows a 3.4-fold increase in tensile stress compared with the hydrogel without the nanofiller. The introduction of the PImQ/graphene nanocomposite also increases the fracture stress of the NC hydrogel through cation-π and π-π interactions. The improved mechanical properties of the NC hydrogel result from the synergistic effects of the chemical crosslinking of the polymer network and the physical crosslinking of the polymer/graphene nanofiller.

| S-EPMC9505845 | biostudies-literature

Green and facile synthesis of few-layer graphene via liquid exfoliation process for Lithium-ion batteries.

Project description:A green and facile method using jet cavitation (JC) was utilized to prepare few layer graphene (FLG) derived from artificial graphite delamination without adding any strong acids and oxidants. The JC method not only provides high quality FLG with high yield but also demonstrate excellent electrochemical performance as anode materials for Li-ion batteries. Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) as well as BET isotherms and XPS are carried out in this study. The results of atomic force microscopy (AFM) further revealed that up to 85% of the prepared FLG were less than 10 layers. This exfoliation process happened mainly due to the cavitation-induced intensive tensile stress acting on the layered materials. Electrochemical measurements demonstrate that graphite anode delivered only 240 mAh/g while FLG anode achieved more than 322 mAh/g at 5C rate test. These results indicate that JC method not only paves the way for cheaper and safer production of graphene but also holds great potential applications in energy-related technology.

| S-EPMC6021450 | biostudies-literature

Facial fabrication of few-layer functionalized graphene with sole functional group through Diels–Alder reaction by ball milling† † Electronic supplementary information (ESI) available. See https://doi.org/10.1039/d2ra01668k

Project description:The widespread use of graphene as a next-generation material in various applications requires developing an environmentally friendly and efficient method for fabricating functionalized graphene. Chemically, graphene can be used as an electron donor or attractor. Here, graphite was successfully exfoliated, and an in situ Diels–Alder reaction (D–A) was carried out to fabricate functionalized graphene with sole functional groups via mechanochemical ball milling. The reactivities of graphene acting as a diene or a dienophile were investigated. Few-layer (≤2 layers) graphene specimens were obtained by wet ball milling, heating in a nitrogen atmosphere, and solvent ultrasonic treatment. The ball-milling method was more effective than heating in a nitrogen atmosphere, and the [2 + 4] D–A of graphene was more dominant than the [4 + 2] D–A in the ball-milling process. The surface tension of functionalized graphene decreased, which provided a theoretical basis for the dispersion and exfoliation of graphite in a suitable solvent. Functionalized graphene still had a high electrical conductivity, which has far-reaching significance for functionalized graphene to be applied in electronic semiconductors and related applications. Meanwhile, functionalized graphene was applied to polymer composite fibers, the tensile strength and the Young's modulus could reach 780 MPa and 19 GPa. The volume resistivity was two orders of magnitude lower than that of pure fiber. Thus, the use of ball milling to efficiently exfoliate and in situ functionalize graphite will help to develop a strategy that can be widely used to manufacture nanomaterials for various application fields. The widespread use of graphene as a next-generation material in various applications requires developing an environmentally friendly and efficient method for fabricating functionalized graphene.

| S-EPMC9204711 | biostudies-literature

Layer-engineered large-area exfoliation of graphene.

Project description:The competition between quality and productivity has been a major issue for large-scale applications of two-dimensional materials (2DMs). Until now, the top-down mechanical cleavage method has guaranteed pure perfect 2DMs, but it has been considered a poor option in terms of manufacturing. Here, we present a layer-engineered exfoliation technique for graphene that not only allows us to obtain large-size graphene, up to a millimeter size, but also allows selective thickness control. A thin metal film evaporated on graphite induces tensile stress such that spalling occurs, resulting in exfoliation of graphene, where the number of exfoliated layers is adjusted by using different metal films. Detailed spectroscopy and electron transport measurement analysis greatly support our proposed spalling mechanism and fine quality of exfoliated graphene. Our layer-engineered exfoliation technique can pave the way for the development of a manufacturing-scale process for graphene and other 2DMs in electronics and optoelectronics.

| S-EPMC7608796 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data