Dataset Information

Marine Collagen from Alternative and Sustainable Sources: Extraction, Processing and Applications.

ABSTRACT: Due to its unique properties, collagen is used in the growing fields of pharmaceutical and biomedical devices, as well as in the fields of nutraceuticals, cosmeceuticals, food and beverages. Collagen also represents a valid resource for bioplastics and biomaterials, to be used in the emerging health sectors. Recently, marine organisms have been considered as promising sources of collagen, because they do not harbor transmissible disease. In particular, fish biomass as well as by-catch organisms, such as undersized fish, jellyfish, sharks, starfish, and sponges, possess a very high collagen content. The use of discarded and underused biomass could contribute to the development of a sustainable process for collagen extraction, with a significantly reduced environmental impact. This addresses the European zero-waste strategy, which supports all three generally accepted goals of sustainability: sustainable economic well-being, environmental protection, and social well-being. A zero-waste strategy would use far fewer new raw materials and send no waste materials to landfills. In this review, we present an overview of the studies carried out on collagen obtained from by-catch organisms and fish wastes. Additionally, we discuss novel technologies based on thermoplastic processes that could be applied, likewise, as marine collagen treatment.

SUBMITTER: Coppola D

PROVIDER: S-EPMC7230273 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Marine Collagen from Alternative and Sustainable Sources: Extraction, Processing and Applications.

Coppola Daniela D Oliviero Maria M Vitale Giovanni Andrea GA Lauritano Chiara C D'Ambra Isabella I Iannace Salvatore S de Pascale Donatella D

Marine drugs 20200415 4

Due to its unique properties, collagen is used in the growing fields of pharmaceutical and biomedical devices, as well as in the fields of nutraceuticals, cosmeceuticals, food and beverages. Collagen also represents a valid resource for bioplastics and biomaterials, to be used in the emerging health sectors. Recently, marine organisms have been considered as promising sources of collagen, because they do not harbor transmissible disease. In particular, fish biomass as well as by-catch organisms, ...[more]

PMID: 32326635

Similar Datasets

Project description:The search for promising and renewable sources of carbohydrates for the production of biofuels and other biorenewables has been stimulated by an increase in global energy demand in the face of growing concern over greenhouse gas emissions and fuel security. In particular, interest has focused on non-food lignocellulosic biomass as a potential source of abundant and sustainable feedstock for biorefineries. Here we investigate the potential of three Brazilian grasses (Panicum maximum, Pennisetum purpureum and Brachiaria brizantha), as well as bark residues from the harvesting of two commercial Eucalyptus clones (E. grandis and E. grandis x urophylla) for biofuel production, and compare these to sugarcane bagasse. The effects of hot water, acid, alkaline and sulfite pretreatments (at increasing temperatures) on the chemical composition, morphology and saccharification yields of these different biomass types were evaluated.The average yield (per hectare), availability and general composition of all five biomasses were compared. Compositional analyses indicate a high level of hemicellulose and lignin removal in all grass varieties (including sugarcane bagasse) after acid and alkaline pretreatment with increasing temperatures, whilst the biomasses pretreated with hot water or sulfite showed little variation from the control. For all biomasses, higher cellulose enrichment resulted from treatment with sodium hydroxide at 130°C. At 180°C, a decrease in cellulose content was observed, which is associated with high amorphous cellulose removal and 5-hydroxymethyl-furaldehyde production. Morphological analysis showed the effects of different pretreatments on the biomass surface, revealing a high production of microfibrillated cellulose on grass surfaces, after treatment with 1% sodium hydroxide at 130°C for 30 minutes. This may explain the higher hydrolysis yields resulting from these pretreatments, since these cellulosic nanoparticles can be easily accessed and cleaved by cellulases.Our results show the potential of three Brazilian grasses with high productivity yields as valuable sources of carbohydrates for ethanol production and other biomaterials. Sodium hydroxide at 130°C was found to be the most effective pretreatment for enhanced saccharification yields. It was also efficient in the production of microfibrillated cellulose on grass surfaces, thereby revealing their potential as a source of natural fillers used for bionanocomposites production.

Project description:BACKGROUND:Biosurfactants are surface-active agents produced by microorganisms that have higher efficiency and stability, lower toxicity and higher biocompatibility and biodegradability than chemical surfactants. Despite its properties and potential application in a wide range of environmental and industrial processes, biosurfactants are still not cost-competitive when compared to their synthetic counterparts. Cost effective technologies and renewable raw substrates as agro-industrial and regional waste from northeast of Brazil as cassava flour wastewater, supplemented with lactose and corn oil are mainly the chemically media for growing microorganism and in turn the production of the biosurfactant of quality. This study aimed to obtained biosurfactant by Serratia marcescens UCP 1549 containing cassava flour wastewater (CWW), by application of a full-factorial design, as sustainable practices in puts the production process in promising formulation medium. The characterization of the biomolecule was carried out, as well as the determination of its stability and toxicity for cabbage seeds. In addition, its ability to stimulate seed germination for agriculture application and oil spill bioremediation were investigated. RESULTS:Serratia marcescens showed higher reduction of surface tension (25.92 mN/m) in the new medium containing 0.2% lactose, 6% cassava flour wastewater and 5% corn waste oil, after 72 h of fermentation at 28 °C and 150 rpm. The substrate cassava flour wastewater showed a promising source of nutrients for biosurfactant production. The isolate biosurfactant exhibited a CMC of 1.5% (w/v) and showed an anionic and polymeric structure, confirmed by infrared spectra. The biomolecule demonstrated high stability under different temperatures, salinity and pH values and non-toxicity against to cabbage seeds. Thus, exploring biosurfactant their potential role in seeds germinations and the promotion and agricultural applications was investigated. In addition, the effectiveness of biosurfactant for removal burned motor oil adsorbed in sand was verified. CONCLUSIONS:The use of medium containing CWW not only reduces the cost of process of biosurfactant production, but also the environmental pollution due to the inappropriate disposal of this residue. This fact, added to the high stability and non-toxicity of the biosurfactant produced by S. marcescens UCP 1549, confirms its high environmental compatibility, make it a sustainable biocompound that can be replace chemical surfactants in diverse industries. In addition, the effectiveness of biosurfactant for stimulate seed germination and removing burned motor oil from sand, suggests its suitability for agriculture and bioremediation applications.

Dataset Information

Marine Collagen from Alternative and Sustainable Sources: Extraction, Processing and Applications.

Publications

Marine Collagen from Alternative and Sustainable Sources: Extraction, Processing and Applications.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure