Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Apparent Contact Angle around the Periphery of a Liquid Drop on Roughened Surfaces.

ABSTRACT: The wetting of roughened surfaces is complicated since not all of the surface of the irregular surface is wetted and thus, the three-phase contact line for the liquid drop is a complex, three-dimensional line that varies according to the dimensions of the roughness and its spatial heterogeneity. This can cause the contact line to not sit within a constant height horizontal plane especially when air is trapped underneath the liquid layer. Here, we explore the effect of roughness on the effective contact angle of a water droplet on a roughened hydrophobic surface. The results show that the apparent contact angle varies around the periphery of the droplet due to the roughness of the surface on first contact. Also, repeated wetting of the droplet on the surface reveals that the apparent contact angle changes due to residual liquid remaining on the roughened surface. The results also show that the Wenzel and Cassie-Baxter models tend to overestimate the apparent contact angle on the roughened surfaces.

SUBMITTER: Huang X

PROVIDER: S-EPMC7237455 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Apparent Contact Angle around the Periphery of a Liquid Drop on Roughened Surfaces.

Huang Xuemin X Gates Ian I

Scientific reports 20200519 1

The wetting of roughened surfaces is complicated since not all of the surface of the irregular surface is wetted and thus, the three-phase contact line for the liquid drop is a complex, three-dimensional line that varies according to the dimensions of the roughness and its spatial heterogeneity. This can cause the contact line to not sit within a constant height horizontal plane especially when air is trapped underneath the liquid layer. Here, we explore the effect of roughness on the effective ...[more]

PMID: 32427853

Similar Datasets

Symmetry breaking in drop bouncing on curved surfaces.

Project description:The impact of liquid drops on solid surfaces is ubiquitous in nature, and of practical importance in many industrial processes. A drop hitting a flat surface retains a circular symmetry throughout the impact process. Here we show that a drop impinging on Echevaria leaves exhibits asymmetric bouncing dynamics with distinct spreading and retraction along two perpendicular directions. This is a direct consequence of the cylindrical leaves that have a convex/concave architecture of size comparable to the drop. Systematic experimental investigations on mimetic surfaces and lattice Boltzmann simulations reveal that this novel phenomenon results from an asymmetric momentum and mass distribution that allows for preferential fluid pumping around the drop rim. The asymmetry of the bouncing leads to ?40% reduction in contact time.

| S-EPMC4674688 | biostudies-literature

Effects of Lasers and Their Delivery Characteristics on Machined and Micro-Roughened Titanium Dental Implant Surfaces.

Project description:The aim of the study was to investigate the effects of neodymium: yttrium aluminium garnet (Nd:YAG) (1064 nm) and erbium: yttrium aluminium garnet (Er:YAG) (2940 nm) laser energy on titanium when delivered with conventional optics (focusing handpieces or plain ended optical fibres) or with a conical tip. Machined and micro-roughened implant discs were subjected to laser irradiation under a variety of energy settings either dry (without water) or wet (with water). Samples were scanned using a 3D non-contact laser profilometer and analysed for surface roughness, volume of peaks and the maximum diameter of the ablated area. Conical tip designs when used with both lasers showed no surface effect at any power setting on both machined and micro-roughened implant surfaces, regardless of the irrigation condition. When used with conventional delivery systems, laser effects on titanium were dose related, and were more profound with the Nd:YAG than with the Er:YAG laser. High laser pulse energies caused surface fusion which reduced the roughness of micro-roughened titanium surfaces. Likewise, repeated pulses and higher power densities also caused greater surface modifications. The presence of water reduced the influence of laser irradiation on titanium. It may be concluded that conical fibres can reduce unwanted surface modification, and this may be relevant to clinical protocols for debridement or disinfection of titanium dental implants.

| S-EPMC7552764 | biostudies-literature

Air evolution during drop impact on liquid pool.

Project description:We elucidate the evolution of the entrained air in drop impact on a wide range of liquids, using ultrafast X-ray phase-contrast imaging. We elaborate the retraction mechanism of the entrapped air film in terms of liquid viscosity. We found the criterion for deciding if the entrapped air evolves into single or double bubbles, as determined by competition among inertia, capillarity, and viscosity. Low viscosity and low surface tension induce a small daughter droplet encapsulated by a larger air shell bubble, forming an antibubble. We demonstrate a phase diagram for air evolution regarding hydrodynamics.

| S-EPMC7113293 | biostudies-literature

Hanging droplets from liquid surfaces.

Project description:Natural and man-made robotic systems use the interfacial tension between two fluids to support dense objects on liquid surfaces. Here, we show that coacervate-encased droplets of an aqueous polymer solution can be hung from the surface of a less dense aqueous polymer solution using surface tension. The forces acting on and the shapes of the hanging droplets can be controlled. Sacs with homogeneous and heterogeneous surfaces are hung from the surface and, by capillary forces, form well-ordered arrays. Locomotion and rotation can be achieved by embedding magnetic microparticles within the assemblies. Direct contact of the droplet with air enables in situ manipulation and compartmentalized cascading chemical reactions with selective transport. Applications including functional microreactors, motors, and biomimetic robots are evident.

| S-EPMC7165464 | biostudies-literature

Liquid crystals on deformable surfaces.

Project description:Liquid crystals with molecules constrained to the tangent bundle of a curved surface show interesting phenomena resulting from the tight coupling of the elastic and bulk-free energies of the liquid crystal with geometric properties of the surface. We derive a thermodynamically consistent Landau-de Gennes-Helfrich model which considers the simultaneous relaxation of the Q-tensor field and the surface. The resulting system of tensor-valued surface partial differential equation and geometric evolution laws is numerically solved to tackle the rich dynamics of this system and to compute the resulting equilibrium shape. The results strongly depend on the intrinsic and extrinsic curvature contributions and lead to unexpected asymmetric shapes.

| S-EPMC7544356 | biostudies-literature

Contact stiffness of randomly rough surfaces.

Project description:We investigate the contact stiffness of an elastic half-space and a rigid indenter with randomly rough surface having a power spectrum C2D(q)proportional q(-2H-2), where q is the wave vector. The range of H[symbol: see text] is studied covering a wide range of roughness types from white noise to smooth single asperities. At low forces, the contact stiffness is in all cases a power law function of the normal force with an exponent α. For H > 2, the simple Hertzian behavior is observed . In the range of 0 < H < 2, the Pohrt-Popov behavior is valid (). For H < 0, a power law with a constant power of approximately 0.9 is observed, while the exact value depends on the number of modes used to produce the rough surface. Interpretation of the three regions is given both in the frame of the three dimensional contact mechanics and the method of dimensionality reduction (MDR). The influence of the long wavelength roll-off is investigated and discussed.

| S-EPMC3836042 | biostudies-other

Symmetry-Breaking Drop Bouncing on Superhydrophobic Surfaces with Continuously Changing Curvatures.

Project description:Controlling the residence time of drops on the solid surface is related to a wide spectrum of engineering applications, such as self-cleaning and anti-icing. The symmetry-breaking dynamics induced by the initial drop shape can promote drop bouncing. Here, we study the bouncing features of spherical and ellipsoidal drops on elliptical surfaces that continuously change curvatures inspired by natural succulent leaves. The bounce characteristics highly depend on the geometric relations between the ellipsoidal drops and curved surfaces. Numerical results show that ellipsoidal shapes of the drops amplify asymmetries of the mass and momentum in synergy with an influence of the surface curvature during the impact, which is verified by experiments. Effects of the surface anisotropy and drops' ellipticity on the residence time are investigated under various surface morphologies and Weber numbers. The residence time is closely associated with an initial surface curvature at the apex. The underlying principle of modifying the residence time via the drops' ellipticity and initial surface curvature is elucidated based on momentum asymmetry. The understanding of the bouncing features on curved surfaces will offer practical implications for enhanced heat transfer performances and controlled water repellency, etc.

| S-EPMC8434175 | biostudies-literature

Contact angle changes induced by immunocomplex formation.

Project description:Immunoassays analyzing interactions between antigens and antibodies can be affected by capillary action together with binding affinity. This paper studies contact-angle changes of bacterial suspensions on antibody immobilized surfaces. The capillary action and the dried pattern of the bacterial suspensions are analyzed and correlated with specific- and nonspecific bindings between bacteria and antibodies.

| S-EPMC3977604 | biostudies-literature

Computational Fluid Simulation of Fibrinogen around Dental Implant Surfaces.

Project description:Ultraviolet treatment of titanium implants makes their surfaces hydrophilic and enhances osseointegration. However, the mechanism is not fully understood. This study hypothesizes that the recruitment of fibrinogen, a critical molecule for blood clot formation and wound healing, is influenced by the degrees of hydrophilicity/hydrophobicity of the implant surfaces. Computational fluid dynamics (CFD) implant models were created for fluid flow simulation. The hydrophilicity level was expressed by the contact angle between the implant surface and blood plasma, ranging from 5° (superhydrophilic), 30° (hydrophilic) to 50° and 70° (hydrophobic), and 100° (hydrorepellent). The mass of fibrinogen flowing into the implant interfacial zone (fibrinogen infiltration) increased in a time dependent manner, with a steeper slope for surfaces with greater hydrophilicity. The mass of blood plasma absorbed into the interfacial zone (blood plasma infiltration) was also promoted by the hydrophilic surfaces but it was rapid and non-time-dependent. There was no linear correlation between the fibrinogen infiltration rate and the blood plasma infiltration rate. These results suggest that hydrophilic implant surfaces promote both fibrinogen and blood plasma infiltration to their interface. However, the infiltration of the two components were not proportional, implying a selectively enhanced recruitment of fibrinogen by hydrophilic implant surfaces.

| S-EPMC7014059 | biostudies-literature

Measuring Liquid Drop Properties on Nanoscale 1D Patterned Photoresist Structures.

Project description:This communication reports liquid wetting properties of DI-water on one-dimensional nano-patterned photoresist lines atop a silicon substrate as the pattern period is varied from 0.3- to 1.0-µm. Both constant photoresist height and constant width/height ratios are investigated. The line/period ratio was fixed at 0.3 (0.4) for different measurement sequences. The surface of the photoresist was treated with a short CHF3 reactive ion etch to ensure consistent hydrophobic photoresist: water surface energies. Average parallel contact angle (θ||), average perpendicular contact angle (θ⊥), drop width (W), and drop length (L) at constant volume were measured on nano-patterned surfaces fabricated with interferometric lithography. Both θ|| and θ⊥ contact angles increase as the period (0.3- to 1-μm) increases; the θ|| spreading rate is faster than θ⊥ due to pinning on the grooves resulting in an elongated drop shape. The traditional Wenzel and Cassie-Baxter models of drop contact angles were developed for isotropic random 2D roughness and do not account for the anisotropy induced by the 1D line patterns. The observed angular variations with period are not consistent with either model. Understanding liquid wetting properties and hydrophobicity on 1D silicon surfaces has many applications in lab-on-a-chip, micro/nano-fluidic devices, roll-to-roll nano-imprint fabrication, self-cleaning surfaces, and micro-reactors.

| S-EPMC6450940 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data