Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Operating Temperature Stability of Organic Solar Cells with Metal Oxide Hole Extraction Layer.

ABSTRACT: Organic solar cells (OSCs) are promising renewable energy sources for replacing fossil fuels. The power conversion efficiency (PCE) of OSCs has increased based on tremendous effort in material and device engineering. Still, the stability of OSC, such as long lifetime, negative temperature coefficient, must be enhanced for commercialization. In this study, we investigated OSC performance at a high operating temperature near 300-420 K, which are typical temperature regions in photovoltaic applications, with a different hole-extraction layer (HEL). The metal oxide-based HEL, MoO3, exhibited stable operating properties with a PCE drop rate of -0.13%/°C, as compared to polymeric HEL, PEDOT:PSS (-0.20%/°C). This performance reduction of polymeric HEL originated from the degradation of the interface in contact with PEDOT:PSS, as compared to the robust inorganic metal oxide HEL.

SUBMITTER: Lee D

PROVIDER: S-EPMC7240709 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Enhanced Operating Temperature Stability of Organic Solar Cells with Metal Oxide Hole Extraction Layer.

Lee Donggu D Kim Junmo J Park Gyeongtae G Bae Hyeong Woo HW An Myungchan M Kim Jun Young JY

Polymers 20200424 4

Organic solar cells (OSCs) are promising renewable energy sources for replacing fossil fuels. The power conversion efficiency (PCE) of OSCs has increased based on tremendous effort in material and device engineering. Still, the stability of OSC, such as long lifetime, negative temperature coefficient, must be enhanced for commercialization. In this study, we investigated OSC performance at a high operating temperature near 300-420 K, which are typical temperature regions in photovoltaic applicat ...[more]

PMID: 32344608

Similar Datasets

Study on graphene oxide as a hole extraction layer for stable organic solar cells.

Project description:The development of an efficient and stable hole extraction layer (HEL) is crucial for commercializing organic solar cells (OSCs). Although a few candidates have been widely utilized as HELs for OSCs, the most appropriate material has been lacking. A few articles have recently reported graphene oxide (GO) as a well-working HEL that offers comparable performance to conventional HELs. However, a systematic study providing comprehensive insight into the GO-based OSC behavior is lacking. This article discusses broad topics, including the material properties, device efficiency, shelf lifetime, and impedance properties. We found that GO offers excellent properties, which are identical to those of conventional HELs, while the shelf lifetime shows a significant 6-fold increase. Furthermore, we discuss the significantly reduced space-charge limited region of an aged GO-based OSC compared with a PEDOT:PSS-based device, which is revealed to be a reason for the different shelf lifetime. We believe that the results will accelerate the development of GO as an HEL for OSCs and other optoelectronic devices.

| S-EPMC9037667 | biostudies-literature

Thermally Stable Solution Processed Vanadium Oxide as a Hole Extraction Layer in Organic Solar Cells.

Project description:Low-temperature solution-processable vanadium oxide (V₂Ox) thin films have been employed as hole extraction layers (HELs) in polymer bulk heterojunction solar cells. V₂Ox films were fabricated in air by spin-coating vanadium(V) oxytriisopropoxide (s-V₂Ox) at room temperature without the need for further thermal annealing. The deposited vanadium(V) oxytriisopropoxide film undergoes hydrolysis in air, converting to V₂Ox with optical and electronic properties comparable to vacuum-deposited V₂O₅. When s-V₂Ox thin films were annealed in air at temperatures of 100 °C and 200 °C, OPV devices showed similar results with good thermal stability and better light transparency. Annealing at 300 °C and 400 °C resulted in a power conversion efficiency (PCE) of 5% with a decrement approximately 15% lower than that of unannealed films; this is due to the relative decrease in the shunt resistance (Rsh) and an increase in the series resistance (Rs) related to changes in the oxidation state of vanadium.

| S-EPMC5502882 | biostudies-other

Metal-Organic Decomposition-Mediated Nanoparticulate Vanadium Oxide Hole Transporting Buffer Layer for Polymer Bulk-Heterojunction Solar Cells.

Project description:In this study, a solution-processable compact vanadium oxide (V2O5) film with a globular nanoparticulate structure is introduced to the hole transport layer (HTL) of polymer bulk-heterojunction based solar cells comprised of PTB7:PC70BM by using a facile metal-organic decomposition method to replace the conventionally utilized poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). For this, a biocompatible structure-determining agent, polyethylene glycol (PEG, Mn 300), is used as an additive in the precursor to form the nanoparticulate compact V2O5 (hereafter referred to as NP-V2O5) film, which possesses an outstandingly smooth surface morphology. The introduction of NP-V2O5 HTL via the solution process with a neutral pH condition successfully improved the stability by preventing the decomposition of indium tin oxide (ITO) glass and the penetration of heavy-metal components and moisture, which are considered as the crucial drawbacks of using PEDOT:PSS. Over 1440 h (60 days) of the stability test, an organic solar cell (OSC) with NP-V2O5 showed a significant durability, maintaining 82% of its initial power conversion efficiency (PCE), whereas an OSC with PEDOT:PSS maintained 51% of its initial PCE. Furthermore, due to the positive effects of the modified surface properties of NP-V2O5, the PCE was slightly enhanced from 7.47% to 7.89% with a significant improvement in the short-circuit current density and fill factor.

| S-EPMC7465065 | biostudies-literature

High-Hole-Mobility Metal-Organic Framework as Dopant-Free Hole Transport Layer for Perovskite Solar Cells.

Project description:A dopant-free hole transport layer with high mobility and a low-temperature process is desired for optoelectronic devices. Here, we study a metal-organic framework material with high hole mobility and strong hole extraction capability as an ideal hole transport layer for perovskite solar cells. By utilizing lifting-up method, the thickness controllable floating film of Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 at the gas-liquid interface is transferred onto ITO-coated glass substrate. The Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 film demonstrates high compactness and uniformity. The root-mean-square roughness of the film is 5.5 nm. The ultraviolet photoelectron spectroscopy and the steady-state photoluminescence spectra exhibit the Ni3(HITP)2 film can effectively transfer holes from perovskite film to anode. The perovskite solar cells based on Ni3(HITP)2 as a dopant-free hole transport layer achieve a champion power conversion efficiency of 10.3%. This work broadens the application of metal-organic frameworks in the field of perovskite solar cells.

| S-EPMC8738790 | biostudies-literature

Cesium-Doped Vanadium Oxide as the Hole Extraction Layer for Efficient Perovskite Solar Cells.

Project description:In this study, we report the utilization of low-temperature solution-processed Cs-doped VOX thin films as the hole extraction layers (HELs) in perovskite solar cells (PSCs). It is found that the VOX:yCs (where y is the mole ratio of Cs versus V and y = 0.1, 0.3, and 0.5) thin films possess better electrical conductivities than that of the pristine VOX thin film. As a result, the PSCs incorporated with the VOX:yCs HEL exhibit large fill factors and high short-circuit currents, with consequently high power conversion efficiencies, which is more than 30% enhancement as compared with pristine VOX HEL. Our studies provide a facial way to enhance the electrical conductivity of the hole extraction layer for boosting device performance of perovskite solar cells.

| S-EPMC6641240 | biostudies-literature

Plasmonically sensitized metal-oxide electron extraction layers for organic solar cells.

Project description:ZnO and TiOx are commonly used as electron extraction layers (EELs) in organic solar cells (OSCs). A general phenomenon of OSCs incorporating these metal-oxides is the requirement to illuminate the devices with UV light in order to improve device characteristics. This may cause severe problems if UV to VIS down-conversion is applied or if the UV spectral range (λ < 400 nm) is blocked to achieve an improved device lifetime. In this work, silver nanoparticles (AgNP) are used to plasmonically sensitize metal-oxide based EELs in the vicinity (1-20 nm) of the metal-oxide/organic interface. We evidence that plasmonically sensitized metal-oxide layers facilitate electron extraction and afford well-behaved highly efficient OSCs, even without the typical requirement of UV exposure. It is shown that in the plasmonically sensitized metal-oxides the illumination with visible light lowers the WF due to desorption of previously ionosorbed oxygen, in analogy to the process found in neat metal oxides upon UV exposure, only. As underlying mechanism the transfer of hot holes from the metal to the oxide upon illumination with hν < Eg is verified. The general applicability of this concept to most common metal-oxides (e.g. TiOx and ZnO) in combination with different photoactive organic materials is demonstrated.

| S-EPMC4296292 | biostudies-literature

Ultrathin Hole Extraction Layer for Efficient Inverted Perovskite Solar Cells.

Project description:Inverted perovskite solar cells (PSCs) incorporating poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT) as the hole transport/extraction layer have been broadly investigated in recent years. However, most PSCs which incorporate PEDOT as the hole transport layer (HTL) suffer from lower device performance stemming from reduced photocurrent and low open-circuit voltage around 0.95 V. Here, we report an ultrathin PEDOT layer as the HTL for efficient inverted structure PSCs. The transparency, conductivity, and resulting film morphology were studied and compared with traditional architectures and thicker PEDOT layers. The PSC device incorporating an ultrathin PEDOT layer shows significant improvement in short-circuit current density (J SC), open-circuit voltage (V OC), and power conversion efficiency. Because ultrathin PEDOT layers can be easily obtained by dilution, this study suggests a simple way to improve the PSC performance and provide a route to further reduce the fabrication complexity and cost of PSCs.

| S-EPMC6644352 | biostudies-literature

PEG-assisted Sol-gel Synthesis of Compact Nickel Oxide Hole-Selective Layer with Modified Interfacial Properties for Organic Solar Cells.

Project description:As a p-type metal oxide, nickel oxide (NiO) has been extensively utilized for providing a favorable hole transport pathway in organic solar cells (OSCs). To obtain higher crystallinity, a post-annealing process at high temperature is required for the NiO layer. Therefore, fluorine-doped tin oxide (FTO) glass has been widely used for the substrate of NiO. However, the rough surface of the FTO substrate deteriorates the interfacial properties of the NiO layer, which hinders efficient charge extraction in OSCs. In this study, a facile polyethylene glycol (PEG)-assisted sol-gel synthesis of the compact NiO layer as the hole-selective layer is demonstrated. The compact NiO layer has a significantly uniform and smooth surface morphology, facilitating better interfacial properties for favorable charge transport. The modified interfacial properties outstandingly promote the charge migration and recombination blocking in OSCs. In addition, a hybrid structure with compact NiO and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is designed to form a cascade charge extraction and passivate possible pinholes on the NiO layer. Consequently, the compact NiO layer enhances all the parameters determining the power conversion efficiency, including the open-circuit potential (Voc), short-circuit current density (Jsc), and fill factor (FF).

| S-EPMC6401794 | biostudies-literature

Gelation of Hole Transport Layer to Improve the Stability of Perovskite Solar Cells.

Project description:To achieve high power conversion efficiency (PCE) and long-term stability of perovskite solar cells (PSCs), a hole transport layer (HTL) with persistently high conductivity, good moisture/oxygen barrier ability, and adequate passivation capability is important. To achieve enough conductivity and effective hole extraction, spiro-OMeTAD, one of the most frequently used HTL in optoelectronic devices, often needs chemical doping with a lithium compound (LiTFSI). However, the lithium salt dopant induces crystallization and has a negative impact on the performance and lifetime of the device due to its hygroscopic nature. Here, we provide an easy method for creating a gel by mixing a natural small molecule additive (thioctic acid, TA) with spiro-OMeTAD. We discover that gelation effectively improves the compactness of resultant HTL and prevents moisture and oxygen infiltration. Moreover, the gelation of HTL improves not only the conductivity of spiro-OMeTAD, but also the operational robustness of the devices in the atmospheric environment. In addition, TA passivates the perovskite defects and facilitates the charge transfer from the perovskite layer to HTL. As a consequence, the optimized PSCs based on the gelated HTL exhibit an improved PCE (22.52%) with excellent device stability.

| S-EPMC10333165 | biostudies-literature

Photocurrent-Detected 2D Electronic Spectroscopy Reveals Ultrafast Hole Transfer in Operating PM6/Y6 Organic Solar Cells.

Project description:The performance of nonfullerene-acceptor-(NFA)-based organic solar cells is rapidly approaching the efficiency of inorganic cells. The chemical versatility of NFAs extends the light-harvesting range to the infrared, while preserving a considerably high open-circuit-voltage, crucial to achieve power-conversion efficiencies >17%. Such low voltage losses in the charge separation process have been attributed to a low-driving-force and efficient exciton dissociation. Here, we address the nature of the subpicosecond dynamics of electron/hole transfer in PM6/Y6 solar cells. While previous reports focused on active layers only, we developed a photocurrent-detected two-dimensional spectroscopy to follow the charge transfer in fully operating devices. Our measurements reveal an efficient hole-transfer from the Y6-acceptor to the PM6-donor on the subpicosecond time scale. On the contrary, at the same time scale, no electron-transfer is seen from the donor to the acceptor. These findings, putting ultrafast spectroscopy in action on operating optoelectronic devices, provide insight for further enhancing NFA solar cell performance.

| S-EPMC8154857 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data