Dataset Information

Methods for Estimating Wet Bulb Globe Temperature From Remote and Low-Cost Data: A Comparative Study in Central Alabama.

ABSTRACT: Heat stress is a significant health concern that can lead to illness, injury, and mortality. The wet bulb globe temperature (WBGT) index is one method for monitoring environmental heat risk. Generally, WBGT is estimated using a heat stress monitor that includes sensors capable of measuring ambient, wet bulb, and black globe temperature, and these measurements are combined to calculate WBGT. However, this method can be expensive, time consuming, and requires careful attention to ensure accurate and repeatable data. Therefore, researchers have attempted to use standard meteorological measurements, using single data sources as an input (e.g., weather stations) to calculate WBGT. Building on these efforts, we apply data from a variety of sources to calculate WBGT, understand the accuracy of our estimated equation, and compare the performance of different sources of input data. To do this, WBGT measurements were collected from Kestrel 5400 Heat Stress Trackers installed in three locations in Alabama. Data were also drawn from local weather stations, North American Land Data Assimilation System (NLDAS), and low cost iButton hygrometers. We applied previously published equations for estimating natural wet bulb temperature, globe temperature, and WBGT to these diverse data sources. Correlation results showed that WBGT estimates derived from all proxy data sources-weather station, weather station/iButton, NLDAS, NLDAS/iButton-were statistically indistinguishable from each other, or from the Kestrel measurements, at two of the three sites. However, at the same two sites, the addition of iButtons significantly reduced root mean square error and bias compared to other methods.

SUBMITTER: Carter AW

PROVIDER: S-EPMC7240860 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Methods for Estimating Wet Bulb Globe Temperature From Remote and Low-Cost Data: A Comparative Study in Central Alabama.

Carter Anabel W AW Zaitchik Benjamin F BF Gohlke Julia M JM Wang Suwei S Richardson Molly B MB

GeoHealth 20200521 5

Heat stress is a significant health concern that can lead to illness, injury, and mortality. The wet bulb globe temperature (WBGT) index is one method for monitoring environmental heat risk. Generally, WBGT is estimated using a heat stress monitor that includes sensors capable of measuring ambient, wet bulb, and black globe temperature, and these measurements are combined to calculate WBGT. However, this method can be expensive, time consuming, and requires careful attention to ensure accurate a ...[more]

PMID: 32490302

Similar Datasets

Project description:ContextMany organizations associated with sports medicine recommend using wet-bulb globe temperature (WBGT)-based activity-modification guidelines that are uniform across the country. However, no consideration has been given to whether the WBGT thresholds are appropriate for different weather conditions, such as warm-humid (WH) relative to hot-dry (HD), based on known differences in physiological responses to these environments.ObjectiveTo identify if personnel in regions with drier conditions and greater evaporative cooling potential should consider using WBGT-based activity-modification thresholds that differ from those in more humid weather.DesignObservational study.SettingWeather stations across the contiguous United States.Main outcome measure(s)A 15-year hourly WBGT dataset from 217 weather stations across the contiguous United States was used to identify particular combinations of globe temperature, wet-bulb temperature, and air temperature that produce WBGTs of 27.9°C, 30.1°C, and 32.3°C. A total of 71 302 observations were clustered into HD and WH environmental conditions. From these clusters, maximum heat-loss potential and heat-flux values were modeled at equivalent WBGT thresholds with various activity levels, clothing, and equipment configurations.ResultsWe identified strong geographic patterns, with HD conditions predominant in the western half and WH conditions predominant in the eastern half of the country. Heat loss was systematically greater in HD than in WH conditions, indicating an overall less stressful environment, even at equivalent WBGT values. At a WBGT of 32.3°C, this difference was 11 W·m-2 at an activity velocity of 0.3 m·s-1, which doubled for an activity velocity of 0.7 m·s-1. The HD and WH difference increased with the WBGT value, demonstrating that evaporative cooling differences between HD and WH conditions were even greater at a higher, rather than lower, WBGT.ConclusionsPotential heat loss was consistently greater in HD than in WH environments despite equal WBGTs. These findings support the need for further clinical studies to determine the appropriate WBGT thresholds based on environmental and physiological limits to maximize safety while avoiding unnecessary limitations.

Project description:Abundance estimation of carnivore populations is difficult and has prompted the use of non-invasive detection methods, such as remotely-triggered cameras, to collect data. To analyze photo data, studies focusing on carnivores with unique pelage patterns have utilized a mark-recapture framework and studies of carnivores without unique pelage patterns have used a mark-resight framework. We compared mark-resight and mark-recapture estimation methods to estimate bobcat (Lynx rufus) population sizes, which motivated the development of a new "hybrid" mark-resight model as an alternative to traditional methods. We deployed a sampling grid of 30 cameras throughout the urban southern California study area. Additionally, we physically captured and marked a subset of the bobcat population with GPS telemetry collars. Since we could identify individual bobcats with photos of unique pelage patterns and a subset of the population was physically marked, we were able to use traditional mark-recapture and mark-resight methods, as well as the new "hybrid" mark-resight model we developed to estimate bobcat abundance. We recorded 109 bobcat photos during 4,669 camera nights and physically marked 27 bobcats with GPS telemetry collars. Abundance estimates produced by the traditional mark-recapture, traditional mark-resight, and "hybrid" mark-resight methods were similar, however precision differed depending on the models used. Traditional mark-recapture and mark-resight estimates were relatively imprecise with percent confidence interval lengths exceeding 100% of point estimates. Hybrid mark-resight models produced better precision with percent confidence intervals not exceeding 57%. The increased precision of the hybrid mark-resight method stems from utilizing the complete encounter histories of physically marked individuals (including those never detected by a camera trap) and the encounter histories of naturally marked individuals detected at camera traps. This new estimator may be particularly useful for estimating abundance of uniquely identifiable species that are difficult to sample using camera traps alone.

Dataset Information

Methods for Estimating Wet Bulb Globe Temperature From Remote and Low-Cost Data: A Comparative Study in Central Alabama.

Publications

Methods for Estimating Wet Bulb Globe Temperature From Remote and Low-Cost Data: A Comparative Study in Central Alabama.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets