Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structure, mechanical properties, and modeling of cyclically compressed pulmonary emboli.

ABSTRACT: Pulmonary embolism occurs when blood flow to a part of the lungs is blocked by a venous thrombus that has traveled from the lower limbs. Little is known about the mechanical behavior of emboli under compressive forces from the surrounding musculature and blood pressure. We measured the stress-strain responses of human pulmonary emboli under cyclic compression, and showed that emboli exhibit a hysteretic stress-strain curve. The fibrin fibers and red blood cells (RBCs) are damaged during the compression process, causing irreversible changes in the structure of the emboli. We showed using electron and confocal microscopy that bundling of fibrin fibers occurs due to compression, and damage is accumulated as more cycles are applied. The stress-strain curves depend on embolus structure, such that variations in composition give quantitatively different responses. Emboli with a high fibrin component demonstrate higher normal stress compared to emboli that have a high RBC component. We compared the compression response of emboli to that of whole blood clots containing various volume fractions of RBCs, and found that RBCs rupture at a certain critical stress. We describe the hysteretic response characteristic of foams, using a model of phase transitions in which the compressed foam is segregated into coexisting rarefied and densified phases whose fractions change during compression. Our model takes account of the rupture of RBCs in the compressed emboli and stresses due to fluid flow through their small pores. Our results can help in classifying emboli as rich in fibrin or rich in red blood cells, and can help in understanding what responses to expect when stresses are applied to thrombi in vivo.

SUBMITTER: Chernysh IN

PROVIDER: S-EPMC7241098 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Modeling of the axon membrane skeleton structure and implications for its mechanical properties.

Project description:Super-resolution microscopy recently revealed that, unlike the soma and dendrites, the axon membrane skeleton is structured as a series of actin rings connected by spectrin filaments that are held under tension. Currently, the structure-function relationship of the axonal structure is unclear. Here, we used atomic force microscopy (AFM) to show that the stiffness of the axon plasma membrane is significantly higher than the stiffnesses of dendrites and somata. To examine whether the structure of the axon plasma membrane determines its overall stiffness, we introduced a coarse-grain molecular dynamics model of the axon membrane skeleton that reproduces the structure identified by super-resolution microscopy. Our proposed computational model accurately simulates the median value of the Young's modulus of the axon plasma membrane determined by atomic force microscopy. It also predicts that because the spectrin filaments are under entropic tension, the thermal random motion of the voltage-gated sodium channels (Nav), which are bound to ankyrin particles, a critical axonal protein, is reduced compared to the thermal motion when spectrin filaments are held at equilibrium. Lastly, our model predicts that because spectrin filaments are under tension, any axonal injuries that lacerate spectrin filaments will likely lead to a permanent disruption of the membrane skeleton due to the inability of spectrin filaments to spontaneously form their initial under-tension configuration.

| S-EPMC5348042 | biostudies-literature

The distinctive structure and composition of arterial and venous thrombi and pulmonary emboli.

Project description:Although arterial and venous thromboembolic disorders are among the most frequent causes of mortality and morbidity, there has been little description of how the composition of thrombi and emboli depends on their vascular origin and age. We quantified the structure and composition of arterial and venous thrombi and pulmonary emboli using high-resolution scanning electron microscopy. Arterial thrombi contained a surprisingly large amount of fibrin, in addition to platelets. The composition of pulmonary emboli mirrored the most distal part of venous thrombi from which they originated, which differed from the structure of the body and head of the same thrombi. All thrombi and emboli contained few biconcave red blood cells but many polyhedrocytes or related forms of compressed red blood cells, demonstrating that these structures are a signature of clot contraction in vivo. Polyhedrocytes and intermediate forms comprised the major constituents of venous thrombi and pulmonary emboli. The structures within all of the thrombi and emboli were very tightly packed, in contrast to clots formed in vitro. There are distinctive, reproducible differences among arterial and venous thrombi and emboli related to their origin, destination and duration, which may have clinical implications for the understanding and treatment of thrombotic disorders.

| S-EPMC7083848 | biostudies-literature

Active paradoxical and pulmonary emboli in a first trimester pregnancy.

Project description:Capturing a paradoxical embolism in real-time has been a challenge in recent literature. We present the unique case of a 33-year-old, G3P2 female at 8 weeks gestation presenting with dyspnea. An active thrombus through an undiagnosed patent foramen ovale was found requiring emergent surgical intervention with a positive outcome. The presence of a deep vein thrombosis, inferior vena caval thrombus, patent foramen ovale, and pulmonary artery thrombi was contemporarily documented. To our knowledge, there is minimal literature with this presentation.

| S-EPMC9732962 | biostudies-literature

Catheter directed thrombolysis combined with ECMO for massive pulmonary emboli.

Project description:This case report discusses a previously healthy young male who suffered an in hospital cardiac arrest, found to be secondary to massive pulmonary emboli (PE). This patient was not a candidate for PE dosing of tPA, but continued to have worsening cardiogenic shock and acute hypoxic respiratory failure. The decision was made to initiate venoarterial extracorporeal membrane oxygenation (VA ECMO) in combination with catheter assisted thrombolysis. With time, the sequelae of his disease process changed. Although his cardiogenic shock improved, the hypoxemia worsened, and the patient was transitioned from VA to venovenous (VV) ECMO, while managing further complications due to multiple episodes of cardiac arrest and severe coagulopathy with multiple, acute, life-threatening bleeding events. Albeit a growing field, VA and VV ECMO are less than common, individually, however this case reports outlines the even rarer event of transition from VA to VV ECMO in combination with catheter assisted thrombolysis treatment via the EKOS EndoWave Infusion Catheter System. Providing care for critically ill patients often demands a collaborative effort between multiple specialties. This case report exemplifies this collaboration, leading to the combination and unification of alternative treatments: ECMO and catheter assisted thrombolysis.

| S-EPMC5986164 | biostudies-literature

Connecting caddisworm silk structure and mechanical properties: combined infrared spectroscopy and mechanical analysis.

Project description:The underwater silk of an aquatic casemaking caddisfly larvae (Hesperophylax occidentalis) is viscoelastic, and displays distinct yield behaviour, large strain cycle hysteresis and near complete recovery of its initial strength and stiffness when unloaded. Yield followed by a stress plateau has been attributed to sequential rupture of serial Ca(2+)-cross-linked phosphoserine (pS) β-domains. Spontaneous recovery has been attributed to refolding of the Ca(2+)/pS domains powered by an elastic network. In this study, native Ca(2+) ions were exchanged with other metal ions, followed by combined mechanical and FTIR analysis to probe the contribution of pS/metal ion complexes to silk mechanical properties. After exchange of Ca(2+) with Na(+), the fibres are soft elastomers and the infrared spectra are consistent with Cv3 symmetry of the -[Formula: see text] groups. Multivalent metal ions decreased the -[Formula: see text] symmetry and the symmetric stretching modes (vs) split in a manner characteristic of ordered phosphate compounds, such as phosphate minerals and lamellar bilayers of phosphatidic acid lipids. Integrated intensities of the vs bands, indicative of the metal ion's effect on transition dipole moment of the P-O bonds, and thereby the strength of the phosphate metal complex, increased in the order: Na(+) < Mg(2+) < Sr(2+) < Ba(2+) < Ca(2+) < Eu(3+) < La(3+) < Zn(2+) < Fe(2+) With a subset of the metal ion series, the initial stiffness and yield stress of metal ion-exchanged fibres increased in the same order: [Formula: see text] [Formula: see text] establishing the link between phosphate transition dipole moments and silk fibre strength.

| S-EPMC4929942 | biostudies-literature

Extent of intravital contraction of arterial and venous thrombi and pulmonary emboli.

Project description:Blood clots and thrombi undergo platelet-driven contraction/retraction followed by structural rearrangements. We have established quantitative relationships between the composition of blood clots and extent of contraction to determine intravital contraction of thrombi and emboli based on their content. The composition of human blood clots and thrombi was quantified using histology and scanning electron microscopy. Contracting blood clots were segregated into the gradually shrinking outer layer that contains a fibrin-platelet mesh and the expanding inner portion with compacted red blood cells (RBCs). At 10% contraction, biconcave RBCs were partially compressed into polyhedral RBCs, which became dominant at 20% contraction and higher. The polyhedral/biconcave RBC ratio and the extent of contraction displayed an exponential relationship, which was used to determine the extent of intravital contraction of ex vivo thrombi, ranging from 30% to 50%. In venous thrombi, the extent of contraction decreased gradually from the older (head) to the younger (body, tail) parts. In pulmonary emboli, the extent of contraction was significantly lower than in the venous head but was similar to the body and tail, suggesting that the emboli originate from the younger portion(s) of venous thrombi. The extent of contraction in arterial cerebral thrombi was significantly higher than in the younger parts of venous thrombi (body, tail) and pulmonary emboli but was indistinguishable from the older part (head). A novel tool, named the "contraction ruler," has been developed to use the composition of ex vivo thrombi to assess the extent of their intravital contraction, which contributes to the pathophysiology of thromboembolism.

| S-EPMC8941457 | biostudies-literature

Modeling mechanical activation of macrophages during pulmonary fibrogenesis for targeted anti-fibrosis therapy.

Project description:Pulmonary fibrosis is an often fatal lung disease. Immune cells such as macrophages were shown to accumulate in the fibrotic lung, but their contribution to the fibrosis development is unclear. To recapitulate the involvement of macrophages in the development of pulmonary fibrosis, we developed a fibrotic microtissue model with cocultured human macrophages and fibroblasts. We show that profibrotic macrophages seeded on topographically controlled stromal tissues became mechanically activated. The resulting co-alignment of macrophages, collagen fibers, and fibroblasts promoted widespread fibrogenesis in micro-engineered lung tissues. Anti-fibrosis treatment using pirfenidone disrupts the polarization and mechanical activation of profibrotic macrophages, leading to fibrosis inhibition. Pirfenidone inhibits the mechanical activation of macrophages by suppressing integrin αMβ2 and Rho-associated kinase 2. These results demonstrate a potential pulmonary fibrogenesis mechanism at the tissue level contributed by macrophages. The cocultured microtissue model is a powerful tool to study the immune-stromal cell interactions and the anti-fibrosis drug mechanism.

| S-EPMC10980276 | biostudies-literature

Additively-Manufactured High-Concentration Nanocellulose Composites: Structure and Mechanical Properties.

Project description:Additive manufacturing technology (AMT) has transformed polymer composites' manufacturing process with its exceptional ability to construct complex products with unique materials, functions, and structures. Besides limiting studies of manufacturing arbitrarily shaped composites using AMT, printed structures with a high concentration of nanocellulose face adhesion issues upon drying, resulting in shape fidelity issues and low mechanical strength. This research demonstrates an economical approach to printing a high-concentration (25.46 wt%) nanocellulose (NC) layer-wise pattern to fabricate structures. Two different composites are fabricated: (1) 3D-printed pure and high-concentration (10, 15, and 20 wt%) polyvinyl-alcohol (PVA)-blended NC structures followed by freeze-drying and impregnation of Epofix resin by varying hardener contents; (2) 3D-printed PVA-blended NC green composites dried at cleanroom conditions (Relative humidity 45%; Temperature 25 °C). Different contents (10, 15, and 20 wt%) of PVA as a crosslinker were blended with NC to assist the printed layers' adhesions. An optimum PVA content of 15 wt% and an Epofix resin with 4 wt% hardener cases showed the highest bending strength of 55.41 ± 3.63 MPa and elastic modulus of 4.25 ± 0.37 GPa. In contrast, the 15 wt% PVA-blended NC cleanroom-dried green composites without resin infusion showed bending strength and elastic modulus of 94.78 ± 3.18 MPa and 9.00 ± 0.27 GPa, reflecting high interface adhesions as confirmed by scanning electron microscope. This study demonstrated that AMT-based nanocellulose composites could be scaled up for commercial use.

| S-EPMC9920716 | biostudies-literature

Cell properties assessment using optimized dielectrophoresis-based cell stretching and lumped mechanical modeling.

Project description:Cells mechanical property assessment has been a promising label-free method for cell differentiation. Several methods have been proposed for single-cell mechanical properties analysis. Dielectrophoresis (DEP) is one method used for single-cell mechanical property assessment, cell separation, and sorting. DEP method has overcome weaknesses of other techniques, including compatibility with microfluidics, high throughput assessment, and high accuracy. However, due to the lack of a general and explicit model for this method, it has not been known as an ideal cell mechanical property evaluation method. Here we present an explicit model using the most general electromagnetic equation (Maxwell Stress Tensor) for single-cell mechanical evaluation based on the DEP method. For proof of concept, we used the proposed model for differentiation between three different types of cells, namely erythrocytes, peripheral blood mononuclear cells (PBMC), and an epithelial breast cancer cells line (T-47D). The results show that, by a lumped parameter that depends on cells' mechanical and electrical properties, the proposed model can successfully distinguish between the mentioned cell types that can be in a single blood sample. The proposed model would open up the chance to use a mechanical assessment method for cell searching in parallel with other methods.

| S-EPMC7840762 | biostudies-literature

Hexakis-2-(β-carboxyethenylphenoxy)cyclotriphosphazene: Synthesis, Properties, Modeling Structure.

Project description:Condensation of hexakis-2-(formylphenoxy)cyclotriphosphazene with malonic acid yielded hexakis-2-(β-carboxyethenylphenoxy)cyclotriphosphazene (2-CEPP), whose structure was confirmed by 31P, 1H, 13C NMR spectroscopy and MALDI-TOF mass spectrometry. A quantum-chemical calculation for the 2-CEPP molecule using the ab initio methods in the 6-311G** basis set and the DFT-PBE0/6-311g** method was performed with geometry optimization of all parameters by the standard gradient method. The acid strength of 2-CEPP was theoretically estimated. Using the small-angle X-ray scattering method, it was found that 2-CEPP is an amorphous substance, which, when heated, can transform into a crystalline state. However, when heated at 370 °C, 2-CEPP undergoes decarboxylation and polymerization to form an insoluble heat-resistant product. The occurrence of decarboxylation and polymerization reactions in the formed styrene fragments was confirmed by thermal (differential-scanning calorimetry) and spectral (solid-state 13C NMR spectroscopy) analysis.

| S-EPMC10534807 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data