Dataset Information

A Subject-Specific Approach to Detect Fatigue-Related Changes in Spine Motion Using Wearable Sensors.

ABSTRACT: An objective method to detect muscle fatigue-related kinematic changes may reduce workplace injuries. However, heterogeneous responses to muscle fatigue suggest that subject-specific analyses are necessary. The objectives of this study were to: (1) determine if wearable inertial measurement units (IMUs) could be used in conjunction with a spine motion composite index (SMCI) to quantify subject-specific changes in spine kinematics during a repetitive spine flexion-extension (FE) task; and (2) determine if the SMCI was correlated with measures of global trunk muscle fatigue. Spine kinematics were measured using wearable IMUs in 10 healthy adults during a baseline set followed by 10 sets of 50 spine FE repetitions. After each set, two fatigue measures were collected: perceived level of fatigue using a visual analogue scale (VAS), and maximal lift strength. SMCIs incorporating 10 kinematic variables from 2 IMUs (pelvis and T8 vertebrae) were calculated and used to quantify subject-specific changes in movement. A main effect of set was observed (F (1.7, 15.32) = 10.42, p = 0.002), where the SMCI became significantly greater than set 1 starting at set 4. Significant correlations were observed between the SMCI and both fatigue VAS and maximal lift strength at the individual and study level. These findings support the use of wearable IMUs to detect subject-specific changes in spine motion associated with muscle fatigue.

SUBMITTER: Chan VCH

PROVIDER: S-EPMC7249110 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A Subject-Specific Approach to Detect Fatigue-Related Changes in Spine Motion Using Wearable Sensors.

Chan Victor C H VCH Beaudette Shawn M SM Smale Kenneth B KB Beange Kristen H E KHE Graham Ryan B RB

Sensors (Basel, Switzerland) 20200506 9

An objective method to detect muscle fatigue-related kinematic changes may reduce workplace injuries. However, heterogeneous responses to muscle fatigue suggest that subject-specific analyses are necessary. The objectives of this study were to: (1) determine if wearable inertial measurement units (IMUs) could be used in conjunction with a spine motion composite index (SMCI) to quantify subject-specific changes in spine kinematics during a repetitive spine flexion-extension (FE) task; and (2) det ...[more]

PMID: 32384664

Similar Datasets

Project description:Background Fatigue is a broad, multifactorial concept encompassing feelings of reduced physical and mental energy levels. Fatigue strongly impacts patient health-related quality of life across a huge range of conditions, yet, to date, tools available to understand fatigue are severely limited. Methods After using a recurrent neural network-based algorithm to impute missing time series data form a multisensor wearable device, we compared supervised and unsupervised machine learning approaches to gain insights on the relationship between self-reported non-pathological fatigue and multimodal sensor data. Results A total of 27 healthy subjects and 405 recording days were analyzed. Recorded data included continuous multimodal wearable sensor time series on physical activity, vital signs, and other physiological parameters, and daily questionnaires on fatigue. The best results were obtained when using the causal convolutional neural network model for unsupervised representation learning of multivariate sensor data, and random forest as a classifier trained on subject-reported physical fatigue labels (weighted precision of 0.70 ± 0.03 and recall of 0.73 ± 0.03). When using manually engineered features on sensor data to train our random forest (weighted precision of 0.70 ± 0.05 and recall of 0.72 ± 0.01), both physical activity (energy expenditure, activity counts, and steps) and vital signs (heart rate, heart rate variability, and respiratory rate) were important parameters to measure. Furthermore, vital signs contributed the most as top features for predicting mental fatigue compared to physical ones. These results support the idea that fatigue is a highly multimodal concept. Analysis of clusters from sensor data highlighted a digital phenotype indicating the presence of fatigue (95% of observations) characterized by a high intensity of physical activity. Mental fatigue followed similar trends but was less predictable. Potential future directions could focus on anomaly detection assuming longer individual monitoring periods. Conclusion Taken together, these results are the first demonstration that multimodal digital data can be used to inform, quantify, and augment subjectively captured non-pathological fatigue measures.

Project description:BackgroundMobility impairment is common in people with multiple sclerosis (PwMS) and there is a need to assess mobility in remote settings. Here, we apply a novel wireless, skin-mounted, and conformal inertial sensor (BioStampRC, MC10 Inc.) to examine gait characteristics of PwMS under controlled conditions. We determine the accuracy and precision of BioStampRC in measuring gait kinematics by comparing to contemporary research-grade measurement devices.MethodsA total of 45 PwMS, who presented with diverse walking impairment (Mild MS = 15, Moderate MS = 15, Severe MS = 15), and 15 healthy control subjects participated in the study. Participants completed a series of clinical walking tests. During the tests participants were instrumented with BioStampRC and MTx (Xsens, Inc.) sensors on their shanks, as well as an activity monitor GT3X (Actigraph, Inc.) on their non-dominant hip. Shank angular velocity was simultaneously measured with the inertial sensors. Step number and temporal gait parameters were calculated from the data recorded by each sensor. Visual inspection and the MTx served as the reference standards for computing the step number and temporal parameters, respectively. Accuracy (error) and precision (variance of error) was assessed based on absolute and relative metrics. Temporal parameters were compared across groups using ANOVA.ResultsMean accuracy±precision for the BioStampRC was 2±2 steps error for step number, 6±9ms error for stride time and 6±7ms error for step time (0.6-2.6% relative error). Swing time had the least accuracy±precision (25±19ms error, 5±4% relative error) among the parameters. GT3X had the least accuracy±precision (8±14% relative error) in step number estimate among the devices. Both MTx and BioStampRC detected significantly distinct gait characteristics between PwMS with different disability levels (p<0.01).ConclusionBioStampRC sensors accurately and precisely measure gait parameters in PwMS across diverse walking impairment levels and detected differences in gait characteristics by disability level in PwMS. This technology has the potential to provide granular monitoring of gait both inside and outside the clinic.

Project description:BackgroundThe characterization of limb biomechanics has broad implications for analyzing and managing motion in aging, sports, and disease. Motion capture videography and on-body wearable sensors are powerful tools for characterizing linear and angular motions of the body, though are often cumbersome, limited in detection, and largely non-portable. Here we examine the feasibility of utilizing an advanced wearable sensor, fabricated with stretchable electronics, to characterize linear and angular movements of the human arm for clinical feedback. A wearable skin-adhesive patch with embedded accelerometer and gyroscope (BioStampRC, MC10 Inc.) was applied to the volar surface of the forearm of healthy volunteers. Arms were extended/flexed for the range of motion of three different regimes: 1) horizontal adduction/abduction 2) flexion/extension 3) vertical abduction. Data were streamed and recorded revealing the signal "pattern" of movement in three separate axes. Additional signal processing and filtering afforded the ability to visualize these motions in each plane of the body; and the 3-dimensional motion envelope of the arm.ResultsEach of the three motion regimes studied had a distinct pattern - with identifiable qualitative and quantitative differences. Integration of all three movement regimes allowed construction of a "motion envelope," defining and quantifying motion (range and shape - including the outer perimeter of the extreme of motion - i.e. the envelope) of the upper extremity. The linear and rotational motion results from multiple arm motions match measurements taken with videography and benchtop goniometer.ConclusionsA conformal, stretchable electronic motion sensor effectively captures limb motion in multiple degrees of freedom, allowing generation of characteristic signatures which may be readily recorded, stored, and analyzed. Wearable conformal skin adherent sensor patchs allow on-body, mobile, personalized determination of motion and flexibility parameters. These sensors allow motion assessment while mobile, free of a fixed laboratory environment, with utility in the field, home, or hospital. These sensors and mode of analysis hold promise for providing digital "motion biomarkers" of health and disease.

Dataset Information

A Subject-Specific Approach to Detect Fatigue-Related Changes in Spine Motion Using Wearable Sensors.

Publications

A Subject-Specific Approach to Detect Fatigue-Related Changes in Spine Motion Using Wearable Sensors.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets