Dataset Information

Adoption of image surface parameters under moving edge computing in the construction of mountain fire warning method.

ABSTRACT: In order to cope with the problems of high frequency and multiple causes of mountain fires, it is very important to adopt appropriate technologies to monitor and warn mountain fires through a few surface parameters. At the same time, the existing mobile terminal equipment is insufficient in image processing and storage capacity, and the energy consumption is high in the data transmission process, which requires calculation unloading. For this circumstance, first, a hierarchical discriminant analysis algorithm based on image feature extraction is introduced, and the image acquisition software in the mobile edge computing environment in the android system is designed and installed. Based on the remote sensing data, the land surface parameters of mountain fire are obtained, and the application of image recognition optimization algorithm in the mobile edge computing (MEC) environment is realized to solve the problem of transmission delay caused by traditional mobile cloud computing (MCC). Then, according to the forest fire sensitivity index, a forest fire early warning model based on MEC is designed. Finally, the image recognition response time and bandwidth consumption of the algorithm are studied, and the occurrence probability of mountain fire in Muli county, Liangshan prefecture, Sichuan is predicted. The results show that, compared with the MCC architecture, the algorithm presented in this study has shorter recognition and response time to different images in WiFi network environment; compared with MCC, MEC architecture can identify close users and transmit less data, which can effectively reduce the bandwidth pressure of the network. In most areas of Muli county, Liangshan prefecture, the probability of mountain fire is relatively low, the probability of mountain fire caused by non-surface environment is about 8 times that of the surface environment, and the influence of non-surface environment in the period of high incidence of mountain fire is lower than that in the period of low incidence. In conclusion, the surface parameters of MEC can be used to effectively predict the mountain fire and provide preventive measures in time.

SUBMITTER: Cheng C

PROVIDER: S-EPMC7252597 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Adoption of image surface parameters under moving edge computing in the construction of mountain fire warning method.

Cheng Chen C Zhou Hui H Chai Xuchao X Li Yang Y Wang Danning D Ji Yao Y Niu Shichuan S Hou Ying Y

PloS one 20200527 5

In order to cope with the problems of high frequency and multiple causes of mountain fires, it is very important to adopt appropriate technologies to monitor and warn mountain fires through a few surface parameters. At the same time, the existing mobile terminal equipment is insufficient in image processing and storage capacity, and the energy consumption is high in the data transmission process, which requires calculation unloading. For this circumstance, first, a hierarchical discriminant anal ...[more]

PMID: 32459811

Similar Datasets

Project description:PurposeWhile four-dimensional computed tomography (4DCT) and deformable registration can be used to assess the dose delivered to regularly moving targets, there are few methods available for irregularly moving targets. 4DCT captures an idealized waveform, but human respiration during treatment is characterized by gradual baseline shifts and other deviations from a periodic signal. This paper describes a method for computing the dose delivered to irregularly moving targets based on 1D or 3D waveforms captured at the time of delivery.MethodsThe procedure uses CT or 4DCT images for dose calculation, and 1D or 3D respiratory waveforms of the target position at time of delivery. Dose volumes are converted from their Cartesian geometry into a beam-specific radiological depth space, parameterized in 2D by the beam aperture, and longitudinally by the radiological depth. In this new frame of reference, the proton doses are translated according to the motion found in the 1D or 3D trajectory. These translated dose volumes are weighted and summed, then transformed back into Cartesian space, yielding an estimate of the dose that includes the effect of the measured breathing motion. The method was validated using a synthetic lung phantom and a single representative patient CT. Simulated 4DCT was generated for the phantom with 2 cm peak-to-peak motion.ResultsA passively-scattered proton treatment plan was generated using 6 mm and 5 mm smearing for the phantom and patient plans, respectively. The method was tested without motion, and with two simulated breathing signals: a 2 cm amplitude sinusoid, and a 2 cm amplitude sinusoid with 3 cm linear drift in the phantom. The tumor positions were equally weighted for the patient calculation. Motion-corrected dose was computed based on the mid-ventilation CT image in the phantom and the peak exhale position in the patient. Gamma evaluation was 97.8% without motion, 95.7% for 2 cm sinusoidal motion, 95.7% with 3 cm drift in the phantom (2 mm, 2%), and 90.8% (3 mm, 3%)for the patient data.ConclusionsWe have demonstrated a method for accurately reproducing proton dose to an irregularly moving target from a single CT image. We believe this algorithm could prove a useful tool to study the dosimetric impact of baseline shifts either before or during treatment.

Dataset Information

Adoption of image surface parameters under moving edge computing in the construction of mountain fire warning method.

Publications

Adoption of image surface parameters under moving edge computing in the construction of mountain fire warning method.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets