Dataset Information

Utilization of Composts for Adsorption of Methylene Blue from Aqueous Solutions: Kinetics and Equilibrium Studies.

ABSTRACT: Utilization of composts as low-cost adsorbents is an important application in the field of environmental remediation, but these materials have not yet been extensively used for dye removal. In this work, we have studied the characteristics of adsorption of methylene blue onto two composts (a municipal solid waste compost and a pine bark compost). Kinetics and equilibrium batch experiments testing the influence of adsorbent particle size, solution pH and ionic strength were performed. Both composts have a high adsorption capacity for methylene blue, similar to other low-cost adsorbents. Kinetics of adsorption followed a pseudo-first-order model, with maximum adsorption reached after a contact time of two hours. Equilibrium adsorption followed a Langmuir model in general. Reduction of particle size only increased adsorption slightly for composted pine bark. Increase in ionic strength had no effect on adsorption by municipal solid waste compost, but increased adsorption by composted pine bark. Modification of pH between 5 and 7 did not influence adsorption in any case. Overall, the results suggest that electrostatic interaction between the cationic dye and the anionic functional groups in the composts is not the only mechanism involved in adsorption. In conclusion, the use of composts for dye removal is a likely application, in particular for those composts presenting limitations for agricultural use.

SUBMITTER: Paradelo R

PROVIDER: S-EPMC7254315 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Utilization of Composts for Adsorption of Methylene Blue from Aqueous Solutions: Kinetics and Equilibrium Studies.

Paradelo Remigio R Al-Zawahreh Khaled K Barral María Teresa MT

Materials (Basel, Switzerland) 20200509 9

Utilization of composts as low-cost adsorbents is an important application in the field of environmental remediation, but these materials have not yet been extensively used for dye removal. In this work, we have studied the characteristics of adsorption of methylene blue onto two composts (a municipal solid waste compost and a pine bark compost). Kinetics and equilibrium batch experiments testing the influence of adsorbent particle size, solution pH and ionic strength were performed. Both compos ...[more]

PMID: 32397420

Similar Datasets

Project description:This study presents the results of applying the methods of synthesizing mesoporous carbon and mesoporous polymer materials with an extended porous mesostructure as adsorbents for cationic dye molecules. Both types of adsorbents are synthetic materials. The aim of the presented research was the preparation, characterisation, and utilisation of obtained mesoporous adsorbents. The physicochemical properties, morphology, and porous structure characteristics of the obtained materials were determined using low-temperature nitrogen sorption isotherms, X-ray diffraction (XRD), small angle X-ray scattering (SAXS), and potentiometric titration measurements. The morphology and microstructure were imaged using scanning electron microscopy (SEM). The chemical characterisation of the surface chemistry of the adsorbents, which provides information about the surface-active groups, the elemental composition, and the electronic state of the elements, was carried out using X-ray photoelectron spectroscopy (XPS). The adsorption properties of the mesoporous materials were determined using equilibrium and kinetic adsorption experiments for three selected cationic dyes (derivatives of thiazine (methylene blue) and triarylmethane (malachite green and crystal violet)). The adsorption capacity was analysed to the nanostructural and surface properties of used materials. The Generalized Langmuir equation was applied for the analysis of adsorption isotherm data. The adsorption study showed that the carbon materials have a higher sorption capacity for both methylene blue and crystal violet, e.g., 0.88-1.01 mmol/g and 0.33-0.44 mmol/g, respectively, compared to the polymer materials (e.g., 0.038-0.044 mmol/g and 0.038-0.050 mmol/g, respectively). The kinetics of dyes adsorption was closely correlated with the structural properties of the adsorbents. The kinetic data were analysed using various equations: first-order (FOE), second-order (SOE), mixed 1,2-order (MOE), multi-exponential (m-exp), and fractal-like MOE (f-MOE).

Project description:Environment-friendly composite hydrogel beads based on carboxymethyl cellulose (CMC), alginate (Alg) and graphene oxide (GO) were synthesized by an ionotropic gelation technique and studied as an efficient adsorbent for methylene blue (MB). The chemical structure and surface morphology of the prepared hydrogel beads were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential thermal analysis (DTA) and point of zero charge (pHpzc). A hybrid response surface methodology integrated Box-Behnken design (RSM-BBD) was successfully developed to model, simulate, and optimize the biosorption process. The synergistic effects between three critical independent variables including adsorbent dose (0.3-0.7 g), pH of the MB solution (6.5-9.5) and initial MB concentration (15-45 mg L-1) on the MB adsorption capacity (mg g-1) and removal efficiency (%) were statistically studied and optimized. The performance of the RSM-BBD method was found to be very impressive and efficient. Results proved that the adsorption process follows a polynomial quadratic model since high regression parameters were obtained (R 2-value = 99.8% and adjusted R 2-value = 99.3%). Analysis of variance (ANOVA) further confirms the validity of the suggested model. The optimal conditions for 96.22 ± 2.96% MB removal were predicted to be 0.6 g of CMC-Alg/GO hydrogel beads, MB concentration of 15 mg L-1 and pH of 9.5 within 120 min. The adsorption equilibrium is better described by the Freundlich isotherm, indicating that physisorption is the rate controlling mechanism. The MB adsorption process was thermodynamically spontaneous and endothermic. A reusability study revealed that the prepared adsorbent is readily reusable. The adsorbent still maintains its ability to adsorb MB for up to four cycles. Results reported in this study demonstrated that CMC-Alg/GO hydrogel beads are an effective, promising and recyclable adsorbent for the removal of MB from aqueous solutions.

Dataset Information

Utilization of Composts for Adsorption of Methylene Blue from Aqueous Solutions: Kinetics and Equilibrium Studies.

Publications

Utilization of Composts for Adsorption of Methylene Blue from Aqueous Solutions: Kinetics and Equilibrium Studies.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets