Dataset Information

Bioactive poly (methyl methacrylate) bone cement for the treatment of osteoporotic vertebral compression fractures.

ABSTRACT: Rationale: Poly (methyl methacrylate) (PMMA) bone cement is one of the most commonly used biomaterials for augmenting/stabilizing osteoporosis-induced vertebral compression fractures (OVCFs), such as percutaneous vertebroplasty (PVP) and balloon kyphoplasty (BKP). However, its clinical applications are limited by its poor performance in high compressive modulus and weak bonding to bone. To address these issues, a bioactive composite bone cement was developed for the treatment of osteoporotic vertebral compression fractures, in which mineralized collagen (MC) was incorporated into the PMMA bone cement (MC-PMMA). Methods: The in vitro properties of PMMA and MC-PMMA composite bone cement were determined, including setting time, compressive modulus, adherence, proliferation, and osteogenic differentiation of rat bone mesenchymal stem cells. The in vivo properties of both cements were evaluated in an animal study (36 osteoporotic New Zealand female rabbits divided equally between the two bone cement groups; PVP at L5) and a small-scale and short-term clinical study (12 patients in each of the two bone cement groups; follow-up: 2 years). Results: In terms of value for PMMA bone cement, the handling properties of MC-PMMA bone cement were not significantly different. However, both compressive strength and compressive modulus were found to be significantly lower. In the rabbit model study, at 8 and 12 weeks post-surgery, bone regeneration was more significant in MC-PMMA bone cement (cortical bone thickness, osteoblast area, new bone area, and bone ingrowth %; each significantly higher). In the clinical study, at a follow-up of 2 years, both the Visual Analogue Score and Oswestry Disability Index were significantly reduced when MC-PMMA cement was used. Conclusions: MC-PMMA bone cement demonstrated good adaptive mechanical properties and biocompatibility and may be a promising alternative to commercial PMMA bone cements for the treatment of osteoporotic vertebral fractures in clinical settings. While the present results for MC-PMMA bone cement are encouraging, further study of this cement is needed to explore its viability as an ideal alternative for use in PVP and BKP.

SUBMITTER: Zhu J

PROVIDER: S-EPMC7255031 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Bioactive poly (methyl methacrylate) bone cement for the treatment of osteoporotic vertebral compression fractures.

Zhu Jinjin J Yang Shuhui S Cai Kaiwen K Wang Shuo S Qiu Zhiye Z Huang Junfei J Jiang Guoqiang G Wang Xiumei X Fang Xiangqian X

Theranostics 20200517 14

<b>Rationale:</b> Poly (methyl methacrylate) (PMMA) bone cement is one of the most commonly used biomaterials for augmenting/stabilizing osteoporosis-induced vertebral compression fractures (OVCFs), such as percutaneous vertebroplasty (PVP) and balloon kyphoplasty (BKP). However, its clinical applications are limited by its poor performance in high compressive modulus and weak bonding to bone. To address these issues, a bioactive composite bone cement was developed for the treatment of osteoporo ...[more]

PMID: 32483469

Similar Datasets

Project description:Powder-liquid poly (methyl methacrylate) (PMMA) bone cements are widely utilized for augmentation of bone fractures and fixation of orthopedic implants. These cements typically have an abundance of beneficial qualities, however their lack of bioactivity allows for continued development. To enhance osseointegration and bioactivity, calcium phosphate cements prepared with hydroxyapatite, brushite or tricalcium phosphates have been introduced with rather unsuccessful results due to increased cement viscosity, poor handling and reduced mechanical performance. This has limited the use of such cements in applications requiring delivery through small cannulas and in load bearing. The goal of this study is to design an alternative cement system that can better accommodate calcium-phosphate additives while preserving cement rheological properties and performance. In the present work, a number of brushite-filled two-solution bone cements were prepared and characterized by studying their complex viscosity-versus-test frequency, extrusion stress, clumping tendency during injection through a syringe, extent of fill of a machined void in cortical bone analog specimens, and compressive strength. The addition of brushite into the two-solution cement formulations investigated did not affect the pseudoplastic behavior and handling properties of the materials as demonstrated by rheological experiments. Extrusion stress was observed to vary with brushite concentration with values lower or in the range of control PMMA-based cements. The materials were observed to completely fill pre-formed voids in bone analog specimens. Cement compressive strength was observed to decrease with increasing concentration of fillers; however, the materials exhibited high enough strength for consideration in load bearing applications. The results indicated that partially substituting the PMMA phase of the two-solution cement with brushite at a 40% by mass concentration provided the best combination of the properties investigated. This alternative material may find applications in systems requiring highly injectable and viscous cements such as in the treatment of spinal fractures and bone defects.

Project description:BACKGROUND:One factor related to disability in people with spinal deformity is decreased postural control and increased risk of falling. However, little is known about the effect of osteoporotic vertebral compression fractures (OVCFs) and their recovery on gait and stability. Walking characteristics of older adults with and without vertebral fractures have not yet been compared. AIMS:The purpose of the current study was to examine the spatiotemporal gait parameters and their variability in patients with an OVCF and healthy participants during treadmill walking at baseline and after 6 months of recovery. METHODS:Twelve female patients suffering a symptomatic OVCF were compared to 11 matched controls. Gait analysis was performed with a dual-belt instrumented treadmill with a 180° projection screen providing a virtual environment (computer-assisted rehabilitation environment). Results of patients with an OVCF and healthy participants were compared. Furthermore, spatiotemporal gait parameters were assessed over 6 months following the fracture. RESULTS:Patients suffering from an OVCF appeared to walk with significantly shorter, faster and wider strides compared to their healthy counterparts. Although stride time and length improved over time, the majority of the parameters analysed remained unchanged after 6 months of conservative treatment. DISCUSSION:Since patients do not fully recover to their previous level of mobility after 6 months of conservative treatment for OVCF, it appears of high clinical importance to add balance and gait training to the treatment algorithm of OVCFs. CONCLUSIONS:Patients suffering from an OVCF walk with shorter, faster and wider strides compared to their healthy counterparts adopt a less stable body configuration in the anterior direction, potentially increasing their risk of forward falls if perturbed. Although stride time and stride length improve over time even reaching healthy levels again, patients significantly deviate from normal gait patterns (e.g. in stability and step width) after 6 months of conservative treatment.

Project description:Study Design A biomechanical and radiographic study using vertebral analogues. Objectives Kyphoplasty and vertebroplasty are widely used techniques to alleviate pain in fractures secondary to osteoporosis. However, cement leakage toward vital structures like the spinal cord can be a major source of morbidity and even mortality. We define safe cement injection as the volume of the cement injected into a vertebra before the cement leakage occurs. Our objective is to compare the amount of cement that can be safely injected into an osteoporotic vertebra with simulated compression fracture using either vertebroplasty or balloon kyphoplasty techniques. Methods Forty artificial vertebral analogues made of polyurethane with osteoporotic cancellous matrix representing the L3 vertebrae were used for this study and were divided into four groups of 10 vertebrae each. The four groups tested were: low-viscosity cement injected using vertebroplasty, high-viscosity cement injected using vertebroplasty, low-viscosity cement injected using balloon kyphoplasty, and high-viscosity cement injected using balloon kyphoplasty. The procedures were performed under fluoroscopic guidance. The injection was stopped when the cement started protruding from the created vascular channel in the osteoporotic vertebral fracture model. The main outcome measured was the volume of the cement injected safely into a vertebra before leakage through the posterior vascular channel. Results The highest volume of the cement injected was in the vertebroplasty group using high-viscosity cement, which was almost twice the injected volume in the other three groups. One-way analysis of variance comparing the four groups showed a statistically significant difference (p < 0.005). Conclusions High-viscosity cement injected using vertebroplasty delivers more cement volume before cement leakage and fills the vertebral body more uniformly when compared with balloon kyphoplasty in osteoporotic vertebrae with compression fractures.

Dataset Information

Bioactive poly (methyl methacrylate) bone cement for the treatment of osteoporotic vertebral compression fractures.

Publications

Bioactive poly (methyl methacrylate) bone cement for the treatment of osteoporotic vertebral compression fractures.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets