Real-Time Surf Manoeuvres’ Detection Using Smartphones’ Inertial Sensors
Ontology highlight
ABSTRACT:
SUBMITTER: Maglogiannis I
PROVIDER: S-EPMC7256581 | biostudies-literature | 2020 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:By developing awareness of smartphone activities that the user is performing on their smartphone, such as scrolling feeds, typing and watching videos, we can develop application features that are beneficial to the users, such as personalization. It is currently not possible to access real-time smartphone activities directly, due to standard smartphone privileges and if internal movement sensors can detect them, there may be implications for access policies. Our research seeks to understand whether the sensor data from existing smartphone inertial measurement unit (IMU) sensors (triaxial accelerometers, gyroscopes and magnetometers) can be used to classify typical human smartphone activities. We designed and conducted a study with human participants which uses an Android app to collect motion data during scrolling, typing and watching videos, while walking or seated and the baseline of smartphone non-use, while sitting and walking. We then trained a machine learning (ML) model to perform real-time activity recognition of those eight states. We investigated various algorithms and parameters for the best accuracy. Our optimal solution achieved an accuracy of 78.6% with the Extremely Randomized Trees algorithm, data sampled at 50 Hz and 5-s windows. We conclude by discussing the viability of using IMU sensors to recognize common smartphone activities.
| S-EPMC7038357 | biostudies-literature
Project description:Circulating tumor cells (CTCs) are single cancer cells or cancer cell clusters that are present in the circulatory system. Assessing CTC levels in patients can aid in the early detection of cancer metastasis and is essential for the purposes of accurate cancer prognosis. However, current in vitro blood tests are limited by the insufficient blood samples and low concentration levels of CTCs, which presents a major challenge for practical biosensing devices. In this work, we propose the first surface plasmon resonance (SPR) fiber probe to work intravenously, which offers a real-time detection of CTCs in bloodstreams. By exposing the protein-functionalized fiber probe to circulating blood, a continuous capture of CTCs ensures a constant increase in enrichment and hence greatly enhances enumeration accuracy. The performance of our plasmonic fiber probe was demonstrated to specifically detect Michigan Cancer Foundation-7 (MCF-7) breast cancer cells in flowing whole mouse blood. Further, a detection limit of ~1.4 cells per microliter was achieved by using an epithelial cell adhesion molecule (EpCAM) antibody-based receptor layer and a 15 minute enrichment period. This pilot study validates real-time CTC detection directly in the bloodstream by using plasmonic fiber probes, which exhibit promising clinical potential for in vivo diagnostic tests involving low concentration biomarkers in circulating blood.
| S-EPMC9687831 | biostudies-literature
Project description:The use of walking aids is prevalent among older people and people with mobility impairment. Rollators are designed to support outdoor mobility and require the user to negotiate curbs and slopes in the urban environment. Despite the prevalence of rollators, analysis of their use outside of controlled environments has received relatively little attention. This Letter reports on an initial study to characterise rollator movement. An inertial measurement unit (IMU) was used to measure the motion of the rollator and analytical approaches were developed to extract features characterising the rollator movement, properties of the surface and push events. The analytics were tested in two situations: first, a healthy participant used a rollator in a laboratory using a motion capture system to obtain ground truth. Second, the IMU was used to measure the movement of a rollator being used by a user with multiple sclerosis on a flat surface, cross-slope, up and down slopes and up and down a step. The results showed that surface inclination and distance travelled measured by the IMU have close approximation to the results from ground truth; therefore, demonstrating the potential for IMU-derived metrics to characterise rollator movement and user's pushing style in the outdoor environment.
| S-EPMC5168841 | biostudies-other
Project description:Full-body motion capture typically requires sensors/markers to be placed on each rigid body segment, which results in long setup times and is obtrusive. The number of sensors/markers can be reduced using deep learning or offline methods. However, this requires large training datasets and/or sufficient computational resources. Therefore, we investigate the following research question: "What is the performance of a shallow approach, compared to a deep learning one, for estimating time coherent full-body poses using only five inertial sensors?". We propose to incorporate past/future inertial sensor information into a stacked input vector, which is fed to a shallow neural network for estimating full-body poses. Shallow and deep learning approaches are compared using the same input vector configurations. Additionally, the inclusion of acceleration input is evaluated. The results show that a shallow learning approach can estimate full-body poses with a similar accuracy (~6 cm) to that of a deep learning approach (~7 cm). However, the jerk errors are smaller using the deep learning approach, which can be the effect of explicit recurrent modelling. Furthermore, it is shown that the delay using a shallow learning approach (72 ms) is smaller than that of a deep learning approach (117 ms).
| S-EPMC6749312 | biostudies-literature
Project description:In this paper, we develop an algorithm to automatically validate and segment a gait cycle in real time into three gait events, namely midstance, toe-off, and heel-strike, using inertial sensors. We first use the physical models of sensor data obtained from a foot-mounted inertial system to differentiate stationary and moving segments of the sensor data. Next, we develop an optimization routine called sparsity-assisted wavelet denoising (SAWD), which simultaneously combines linear time invariant filters, orthogonal multiresolution representations such as wavelets, and sparsity-based methods, to generate a sparse template of the moving segments of the gyroscope measurements in the sagittal plane for valid gait cycles. Thereafter, to validate any moving segment as a gait cycle, we compute the root-mean-square error between the generated sparse template and the sparse representation of the moving segment of the gyroscope data in the sagittal plane obtained using SAWD. Finally, we find the local minima for the stationary and moving segments of a valid gait cycle to detect the gait events. We compare our proposed method with existing methods, for a fixed threshold, using real data obtained from three groups, namely controls, participants with Parkinson disease, and geriatric participants. Our proposed method demonstrates an average F1 score of 87.78% across all groups for a fixed sampling rate, and an average F1 score of 92.44% across all Parkinson disease participants for a variable sampling rate.
| S-EPMC7305840 | biostudies-literature
Project description:For gait classification, hoof-on and hoof-off events are fundamental locomotion characteristics of interest. These events can be measured with inertial measurement units (IMUs) which measure the acceleration and angular velocity in three directions. The aim of this study was to present two algorithms for automatic detection of hoof-events from the acceleration and angular velocity signals measured by hoof-mounted IMUs in walk and trot on a hard surface. Seven Warmblood horses were equipped with two wireless IMUs, which were attached to the lateral wall of the right front (RF) and hind (RH) hooves. Horses were walked and trotted on a lead over a force plate for internal validation. The agreement between the algorithms for the acceleration and angular velocity signals with the force plate was evaluated by Bland Altman analysis and linear mixed model analysis. These analyses were performed for both hoof-on and hoof-off detection and for both algorithms separately. For the hoof-on detection, the angular velocity algorithm was the most accurate with an accuracy between 2.39 and 12.22 ms and a precision of around 13.80 ms, depending on gait and hoof. For hoof-off detection, the acceleration algorithm was the most accurate with an accuracy of 3.20 ms and precision of 6.39 ms, independent of gait and hoof. These algorithms look highly promising for gait classification purposes although the applicability of these algorithms should be investigated under different circumstances, such as different surfaces and different hoof trimming conditions.
| S-EPMC7269263 | biostudies-literature
Project description:By means of the time derivatives of Global Navigation Satellite System (GNSS) carrier-phase measurements, the instantaneous velocity of a stand-alone, single GNSS receiver can be estimated with a high precision of a few mm/s; it is feasible to even obtain the level of tenths of mm/s. Therefore, only data from the satellite navigation message are needed, thus discarding any data from a reference network. Combining this method with an efficient movement-detection algorithm opens some interesting applications for geohazard monitoring; an example is the detection of strong earthquakes. This capability is demonstrated for a case study of the 6.5 Mw earthquake of October 30, 2016, near the city of Norcia in Italy; in that region, there are densely deployed GNSS stations. It is shown that GNSS sensors can detect seismic compressional (P) waves, which are the first to arrive at a measurement station. These findings are substantiated by a comparison with data of strong-motion (SM) seismometers. Furthermore, it is shown that the GNSS-only hypocenter localization comes close (less than a kilometer) to the solutions provided by official seismic services. Finally, we conclude that this method can provide important contributions to a real-time geohazard early-warning system.
| S-EPMC6263520 | biostudies-other
Project description:A prolonged break-over phase might be an indication of a variety of musculoskeletal disorders and can be measured with optical motion capture (OMC) systems, inertial measurement units (IMUs) and force plates. The aim of this study was to present two algorithms for automatic detection of the break-over phase onset from the acceleration and angular velocity signals measured by hoof-mounted IMUs in walk and trot on a hard surface. The performance of these algorithms was evaluated by internal validation with an OMC system and a force plate separately. Seven Warmblood horses were equipped with two wireless IMUs which were attached to the lateral wall of the right front (RF) and hind (RH) hooves. Horses were walked and trotted over a force plate for internal validation while simultaneously the 3D position of three reflective markers, attached to lateral heel, lateral toe and lateral coronet of each hoof, were measured by six infrared cameras of an OMC system. The performance of the algorithms was evaluated by linear mixed model analysis. The acceleration algorithm was the most accurate with an accuracy between -9 and 23 ms and a precision around 24 ms (against OMC system), and an accuracy between -37 and 20 ms and a precision around 29 ms (against force plate), depending on gait and hoof. This algorithm seems promising for quantification of the break-over phase onset although the applicability for clinical purposes, such as lameness detection and evaluation of trimming and shoeing techniques, should be investigated more in-depth.
| S-EPMC7259550 | biostudies-literature
Project description:Although several studies have used wearable sensors to analyze human lifting, this has generally only been done in a limited manner. In this proof-of-concept study, we investigate multiple aspects of offline lift characterization using wearable inertial measurement sensors: detecting the start and end of the lift and classifying the vertical movement of the object, the posture used, the weight of the object, and the asymmetry involved. In addition, the lift duration, horizontal distance from the lifter to the object, the vertical displacement of the object, and the asymmetric angle are computed as lift parameters. Twenty-four healthy participants performed two repetitions of 30 different main lifts each while wearing a commercial inertial measurement system. The data from these trials were used to develop, train, and evaluate the lift characterization algorithms presented. The lift detection algorithm had a start time error of 0.10 s ± 0.21 s and an end time error of 0.36 s ± 0.27 s across all 1489 lift trials with no missed lifts. For posture, asymmetry, vertical movement, and weight, our classifiers achieved accuracies of 96.8%, 98.3%, 97.3%, and 64.2%, respectively, for automatically detected lifts. The vertical height and displacement estimates were, on average, within 25 cm of the reference values. The horizontal distances measured for some lifts were quite different than expected (up to 14.5 cm), but were very consistent. Estimated asymmetry angles were similarly precise. In the future, these proof-of-concept offline algorithms can be expanded and improved to work in real-time. This would enable their use in applications such as real-time health monitoring and feedback for assistive devices.
| S-EPMC7219665 | biostudies-literature
Project description:Out-of-distribution (OOD) in the context of Human Activity Recognition (HAR) refers to data from activity classes that are not represented in the training data of a Machine Learning (ML) algorithm. OOD data are a challenge to classify accurately for most ML algorithms, especially deep learning models that are prone to overconfident predictions based on in-distribution (IIN) classes. To simulate the OOD problem in physiotherapy, our team collected a new dataset (SPARS9x) consisting of inertial data captured by smartwatches worn by 20 healthy subjects as they performed supervised physiotherapy exercises (IIN), followed by a minimum 3 h of data captured for each subject as they engaged in unrelated and unstructured activities (OOD). In this paper, we experiment with three traditional algorithms for OOD-detection using engineered statistical features, deep learning-generated features, and several popular deep learning approaches on SPARS9x and two other publicly-available human activity datasets (MHEALTH and SPARS). We demonstrate that, while deep learning algorithms perform better than simple traditional algorithms such as KNN with engineered features for in-distribution classification, traditional algorithms outperform deep learning approaches for OOD detection for these HAR time series datasets.
| S-EPMC7957807 | biostudies-literature