Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration.
Ontology highlight
ABSTRACT:
SUBMITTER: Vallieres C
PROVIDER: S-EPMC7274803 | biostudies-literature | 2020 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Developing medical devices that resist bacterial attachment and subsequent biofilm formation is highly desirable. In this paper, we report the optimization of the molecular structure and thus material properties of a range of (meth)acrylate copolymers which contain monomers reported to deliver bacterial resistance to surfaces. This optimization allows such monomers to be employed within novel coatings to reduce bacterial attachment to silicone urinary catheters. We show that the flexibility of copolymers can be tuned to match that of the silicone catheter substrate, by copolymerizing these polymers with a lower Tg monomer such that it passes the flexing fatigue tests as coatings upon catheters, that the homopolymers failed. Furthermore, the Tg values of the copolymers are shown to be readily estimated by the Fox equation. The bacterial resistance performance of these copolymers were typically found to be better than the neat silicone or a commercial silver containing hydrogel surface, when the monomer feed contained only 25 v% of the "hit" monomer. The method of initiation (either photo or thermal) was shown not to affect the bacterial resistance of the copolymers. Optimized synthesis conditions to ensure that the correct copolymer composition and to prevent the onset of gelation are detailed.
| S-EPMC6464089 | biostudies-literature
Project description:Significant substratum damage can occur when plasticized PVC (pPVC) is colonized by microorganisms. We investigated microbial colonization of pPVC in an in situ, longitudinal study. Pieces of pPVC containing the plasticizers dioctyl phthalate and dioctyl adipate (DOA) were exposed to the atmosphere for up to 2 years. Fungal and bacterial populations were quantified, and colonizing fungi were identified by rRNA gene sequencing and morphological characteristics. Aureobasidium pullulans was the principal colonizing fungus, establishing itself on the pPVC between 25 and 40 weeks of exposure. A group of yeasts and yeast-like fungi, including Rhodotorula aurantiaca and Kluyveromyces spp., established themselves on the pPVC much later (after 80 weeks of exposure). Numerically, these organisms dominated A. pullulans after 95 weeks, with a mean viable count +/- standard error of 1,000 +/- 200 yeast CFU cm(-2), compared to 390 +/- 50 A. pullulans CFU cm(-2). No bacterial colonization was observed. We also used in vitro tests to characterize the deteriogenic properties of fungi isolated from the pPVC. All strains of A. pullulans tested could grow with the intact pPVC formulation as the sole source of carbon, degrade the plasticizer DOA, produce extracellular esterase, and cause weight loss of the substratum during growth in vitro. In contrast, several yeast isolates could not grow on pPVC or degrade DOA. These results suggest that microbial succession may occur during the colonization of pPVC and that A. pullulans is critical to the establishment of a microbial community on pPVC.
| S-EPMC92133 | biostudies-literature
Project description:Research into the biodeteriorative potential of fungi can serve as an indicator of the condition of heritage items. Biodeterioration of canvas paintings as a result of fungal metabolic activity is understudied with respect to both the species diversity and mechanisms involved. This study brings new evidence for the physiology of fungi biodeteriorative capacity of canvas paintings. Twenty-one fungal isolates were recovered from four oil paintings (The Art Museum, Cluj-Napoca) and one gouache painting (private collection), dating from the 18th to 20th centuries. The species, identified based on the molecular markers Internal Transcribed Spacer (ITS), beta-tubulin (tub2), or translation elongation factor 1 (TEF-1), are common colonisers of canvas paintings or indoor environments (e.g., Penicillium spp., Aspergillus spp., Alternaria spp.). Fungi enzymatic profiles were investigated by means of hydrolysable substrates, included in culture media or in test strips, containing components commonly used in canvas paintings. The pigment solubilisation capacity was assessed in culture media for the primary pigments and studied in relation to the organic acid secretion. Caseinases, amylases, gelatinases, acid phosphatase, N-acetyl-β-glucosaminidase, naphthol-AS-BI-phosphohydrolase, and β-glucosidase were found to be the enzymes most likely involved in the processes of substrate colonisation and breakdown of its components. Aureobasidium genus was found to hold the strongest biodeteriorative potential, followed by Cladosporium, Penicillium, Trichoderma, and Aspergillus. Blue pigment solubilisation was detected, occurring as a result of organic acids secretion. Distinct clusters were delineated considering the metabolic activities detected, indicating that fungi specialise in utilisation of certain types of substrates. It was found that both aged and modern artworks are at risk of fungal biodeterioration, due to the enzymatic activities' diversity and intensity, pigment solubilisation capacity or pigment secretion.
| S-EPMC9224695 | biostudies-literature
Project description:Additive manufacturing (AM) can be advanced by the diverse characteristics offered by thermoplastic and thermoset polymers and the further benefits of copolymerization. However, the availability of suitable polymeric materials for AM is limited and may not always be ideal for specific applications. Additionally, the extensive number of potential monomers and their combinations make experimental determination of resin compositions extremely time-consuming and costly. To overcome these challenges, we develop an active learning (AL) approach to effectively choose compositions in a ternary monomer space ranging from rigid to elastomeric. Our AL algorithm dynamically suggests monomer composition ratios for the subsequent round of testing, allowing us to efficiently build a robust machine learning (ML) model capable of predicting polymer properties, including Young's modulus, peak stress, ultimate strain, and Shore A hardness based on composition while minimizing the number of experiments. As a demonstration of the effectiveness of our approach, we use the ML model to drive material selection for a specific property, namely, Young's modulus. The results indicate that the ML model can be used to select material compositions within at least 10% of a targeted value of Young's modulus. We then use the materials designed by the ML model to 3D print a multimaterial "hand" with soft "skin" and rigid "bones". This work presents a promising tool for enabling informed AM material selection tailored to user specifications and accelerating material discovery using a limited monomer space.
| S-EPMC11009904 | biostudies-literature
Project description:The title compound, C(19)H(18)O(5), crystallizes with two independent mol-ecules (A and B) in an asymmetric unit in both of which the two aromatic rings are in a bis-ectional orientation as evidenced by the dihedral angle between them [41.7?(1)° in mol-ecule A and 35.6?(1)° in mol-ecule B]. Both mol-ecules adopt an E configuration with respect to the C=C bond. An intra-molecular C-H?O hydrogen-bond occurs in mol-ecule A. The crystal packing features inter-molecular C-H?O inter-actions.
| S-EPMC3254561 | biostudies-literature
Project description:The title compound, C(16)H(24)O(3), has a cage-type mol-ecular structure and is of inter-est with respect to its photochemical properties. The structure displays non-classical inter-molecular C-H?O hydrogen bonding, which links the mol-ecules into a three-dimensional network.
| S-EPMC2971291 | biostudies-literature
Project description:This study investigated ericoid mycorrhizal fungi (EMF) diversity in Vaccinium uliginosum across its main wild distribution range in China. Fungal communities in hair roots of V. uliginosum were analyzed using Illumina MiSeq sequencing. Only 22 OTUs were assigned to putative EMF genera. Rhizoscyphus and Meliniomyces dominated EMF communities, followed by Clavaria, Oidiodendron, Lachnum, Acephala, and Phialocephala. There were more dark septate endophytes (DSE) reads from the Greater Khingan Mountains than from other study areas, similar to the results of the percent colonization of DSE by the magnified intersections method. Overall, high-throughput sequencing data provided a rough community-scale sketch of root-associated fungi of V. uliginosum. Two hundred and eighty slow-growing isolates were isolated from root pieces of V. uliginosum, and the isolates matched 16 fungal genera on the basis of morphological and internal transcribed spacer sequence comparison. The isolates of Cryptosporiopsis ericae, Oidiodendron maius, Lachnum sp., Sordariomycetes sp., and Pleosporales sp., formed ericoid hyphal coils via resynthesis trails. The co-existence between EMF and DSE in hair roots was observed via trypan blue staining. A putative model for the co-existence between EMF and DSE in the hair roots of V. uliginosum was proposed. We suggest that under certain environmental stresses, such as low temperature and poor available nutrients, ericoid plants may favor co-colonization by both DSE and EMF.
| S-EPMC6191440 | biostudies-literature
Project description:In the title compound, C13H13NO3, the conformation across the C=C bond is synperiplanar, the torsion angle of the segment C(ring)-C=C-C(N) being 3.2?(5)°. In the crystal, mol-ecules are linked into inversion dimers, arranged in a zigzag pattern, through two C-H?O inter-actions generating R 2 (2)(10) and R 2 (2)(14) motifs. These dimers are arranged in a zigzag pattern in the crystal structure. The mol-ecules are further linked along the c axis through weak C-H?? inter-actions, and weak ??? inter-actions [centroid-centroid separation = 3.9986?(17)?Å] are also observed.
| S-EPMC3884285 | biostudies-literature
Project description:Conversion plateaus rapidly in radical photopolymerizations (RPPs) following discontinuation of irradiation due to rapid termination of reactive radicals, which restricts the wider use of RPPs in applications that involve nonuniform light access including those with attenuated light transmission or irregular surfaces. Based on our recent report of a radical dark-curing photoinitiator (DCPI) that continues polymerization beyond the cessation of irradiation by enabling latent redox initiation with photo-released amine in the presence of a suitable oxidant, we developed a new DCPI with an absorption spectrum that extends well into the visible range. Our design process involved a series of computational investigations of candidate molecules, including a systematic study of substituents and their position-dependent effects on absorption characteristics, electronic transitions, and the photochemical mechanism and its associated energetics. Our quantum chemical computations identified the target compound 5,7-dimethoxy-6-bromo-3-aroylcoumarin-DMPT/BPh4 and predicted that it would facilitate the dark-curing mechanism by concurrent photo-radical generation and photo-induced release of an efficient redox reductant under visible irradiation. This reductant-tethered chromophore was then synthesized and optically characterized with UV-vis spectroscopy that revealed its strong visible-light absorption with a molar absorptivity of 5710 M-1 cm-1 at 405 nm and 50 M-1 cm-1 at 455 nm. We then demonstrated extensive dark-curing of >35% additional conversion over 25 min following brief activation of the shelf-stable one-part system by irradiation with a 455 nm LED that was ceased at 20% conversion. In contrast, shuttering irradiation of the control formulation at that same point resulted in immediate cessation of conversion, which plateaued at 20%. We determined a remarkable initiator efficiency of 2.82 that results from the additional redox-generated radicals with a 77% photo-reductant generation quantum yield. The combination of superior photo- and dark-curing efficiencies of this new visible DCPI is expected to open new application opportunities in RPP, especially those involving resins that are highly light attenuating, surfaces that possess irregular features that produce uneven irradiance, and production lines where continued dark-curing downstream of the light activation step enhances line efficiencies.
| S-EPMC9351574 | biostudies-literature
Project description:Photopolymerization offers substantial advantages in terms of time, temperature, energy consumption, and spatial control of the initiation. The application however is strongly limited due to the constrained penetration of light into thick films. Strategies to overcome the problem of limited curing depth, as well as to improve the curing of shadow areas, involve dual curing, frontal polymerization, and upconversion of particles. Whereas excellent results have been accomplished applying photofrontal polymerization on a theoretical level, few studies report on practical applications achieving high curing depth within short time. This study aims to investigate the potential of photofrontal polymerization, performed only with photoinitiator and light, for the fast and easy production of several-centimeter-thick (meth)acrylic layers. Monomer/ initiator systems were evaluated with respect to their optical density as well as photobleaching behavior. Moreover, depth-dependent polymerization was studied in specimens of varying monomer ratio and photoinitiator concentration. When an ideal photoinitiator concentration was selected, curing up to 52 mm in depth was accomplished within minutes.
| S-EPMC7361706 | biostudies-literature