Dataset Information

Continuous flow vortex fluidic-mediated exfoliation and fragmentation of two-dimensional MXene.

ABSTRACT: MXene (Ti2CT x ) is exfoliated in a vortex fluidic device (VFD), as a thin film microfluidic platform, under continuous flow conditions, down to ca 3 nm thin multi-layered two-dimensional (2D) material, as determined using AFM. The optimized process, under an inert atmosphere of nitrogen to avoid oxidation of the material, was established by systematically exploring the operating parameters of the VFD, along with the concentration of the dispersed starting material and the choice of solvent, which was a 1 : 1 mixture of isopropyl alcohol and water. There is also some fragmentation of the 2D material into nanoparticles ca 68 nm in diameter.

SUBMITTER: Mohammed Al-Antaki AH

PROVIDER: S-EPMC7277261 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Continuous flow vortex fluidic-mediated exfoliation and fragmentation of two-dimensional MXene.

Mohammed Al-Antaki Ahmed Hussein AH Kellici Suela S Power Nicholas P NP Lawrance Warren D WD Raston Colin L CL

Royal Society open science 20200513 5

MXene (Ti2CT x ) is exfoliated in a vortex fluidic device (VFD), as a thin film microfluidic platform, under continuous flow conditions, down to ca 3 nm thin multi-layered two-dimensional (2D) material, as determined using AFM. The optimized process, under an inert atmosphere of nitrogen to avoid oxidation of the material, was established by systematically exploring the operating parameters of the VFD, along with the concentration of the dispersed starting mat ...[more]

PMID: 32537213

Similar Datasets

Project description:Polyglycolic acid (PGA) nanoparticles show promise in biomedical applications due to their exceptional biocompatibility and biodegradability. These nanoparticles can be readily modified, facilitating targeted drug delivery and promoting specific interactions with diseased tissues or cells, including imaging agents and theranostic approaches. Their potential to advance precision medicine and personalized treatments is evident. However, conventional methods such as emulsification solvent evaporation via batch synthesis or tubular reactors via flow chemistry have limitations in terms of nanoparticle properties, productivity, and scalability. To overcome these limitations, this study focuses on the design and development of a 3D-printed vortex tube reactor for the continuous synthesis of PGA nanoparticles using flow chemistry. Computer-aided design (CAD) and the design of experiments (DoE) optimize the reactor design, and computational fluid dynamics simulations (CFD) evaluate the mixing index (MI) and Reynolds (Re) expression. The optimized reactor design was fabricated using fused deposition modeling (FDM) with polypropylene (PP) as the polymer. Dispersion experiments validate the optimization process and investigate the impact of input flow parameters. PGA nanoparticles were synthesized and characterized for size and polydispersity index (PDI). The results demonstrate the feasibility of using a 3D-printed vortex tube reactor for the continuous synthesis of PGA nanoparticles through flow chemistry and highlight the importance of reactor design in nanoparticle production. The CFD results of the optimized reactor design showed homogeneous mixing across a wide range of flow rates with increasing Reynolds expression. The residence time distribution (RTD) results confirmed that increasing the flow rate in the 3D-printed vortex tube reactor system reduced the dispersion variance in the tracer. Both experiments demonstrated improved mixing efficiency and productivity compared to traditional tubular reactors. The study also revealed that the total flow rate had a significant impact on the size and polydispersity index of the formulated PGA nanoparticle, with the optimal total flow rate at 104.46 mL/min, leading to smaller nanoparticles and a lower polydispersity index. Additionally, increasing the aqueous-to-organic volumetric ratio had a significant effect on the reduced particle size of the PGA nanoparticles. Overall, this study provides insights into the use of 3D-printed vortex tube reactors for the continuous synthesis of PGA nanoparticles and underscores the importance of reactor design and flow parameters in PGA nanoparticle formulation.

Dataset Information

Continuous flow vortex fluidic-mediated exfoliation and fragmentation of two-dimensional MXene.

Publications

Continuous flow vortex fluidic-mediated exfoliation and fragmentation of two-dimensional MXene.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets