Dataset Information

Is There a Relationship between Surface Wettability of Structured Surfaces and Lyophobicity toward Liquid Metals?

ABSTRACT: The liquid metal lyophobicity of a rough substrate was, in previous articles, found to be rather independent on the surface wettability. In this article, we scrutinize the impact of surface wettability of a structured (rough) surface on the liquid metal wettability and adhesion. As a model system, a structured diamond coating was synthesized and modified by air plasma. We show that surface wettability (surface free energy) does not play a prominent role for static contact angle measurements and for the liquid metal repelling properties of the diamond coating in droplet impact experiments. In contrast, roll off angles and repeated deposition experiments illustrate that the increased hydrophilicity impacts the long-term liquid metal repellency of our coating. Liquid metal adhered after around 50 deposition/removal cycles on the hydrophilic diamond coating, while no liquid metal adhesion was visible after 100 cycles on the hydrophobic diamond coating, illustrating the fundamental role for the adhesion of liquid metal. The effect of repeated deposition in conjunction with gentle applied force was employed for coating the liquid metal lyophobic (hydrophilic) diamond coating with a thin liquid metal layer. The observed effect may find application in flexible electronics and thermal management systems as a means to improve interfacing of the liquid metal with conductive non-metal coatings.

SUBMITTER: Handschuh-Wang S

PROVIDER: S-EPMC7288057 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Is There a Relationship between Surface Wettability of Structured Surfaces and Lyophobicity toward Liquid Metals?

Handschuh-Wang Stephan S Zhu Lifei L Gan Tiansheng T Wang Tao T

Materials (Basel, Switzerland) 20200515 10

The liquid metal lyophobicity of a rough substrate was, in previous articles, found to be rather independent on the surface wettability. In this article, we scrutinize the impact of surface wettability of a structured (rough) surface on the liquid metal wettability and adhesion. As a model system, a structured diamond coating was synthesized and modified by air plasma. We show that surface wettability (surface free energy) does not play a prominent role for static contact angle measurements and ...[more]

PMID: 32429161

Similar Datasets

Project description:Background and aimsThe epidermal surface of a flower petal is composed of convex cells covered with a structured cuticle, and the roughness of the surface is related to the wettability of the petal. If the surface remains wet for an excessive amount of time the attractiveness of the petal to floral visitors may be impaired, and adhesion of pathogens may be promoted. However, it remains unclear how the epidermal cells and structured cuticle contribute to surface wettability of a petal.MethodsBy considering the additive effects of the epidermal cells and structured cuticle on petal wettability, a thermodynamic model was developed to predict the wetting mode and contact angle of a water droplet at a minimum free energy. Quantitative relationships between petal wettability and the geometries of the epidermal cells and the structured cuticle were then estimated. Measurements of contact angles and anatomical traits of petals were made on seven herbaceous species commonly found in alpine habitats in eastern Nepal, and the measured wettability values were compared with those predicted by the model using the measured geometries of the epidermal cells and structured cuticles.Key resultsThe model indicated that surface wettability depends on the height and interval between cuticular steps, and on a height-to-width ratio for epidermal cells if a thick hydrophobic cuticle layer covers the surface. For a petal epidermis consisting of lenticular cells, a repellent surface results when the cuticular step height is greater than 0·85 µm and the height-to-width ratio of the epidermal cells is greater than 0·3. For an epidermis consisting of papillate cells, a height-to-width ratio of greater than 1·1 produces a repellent surface. In contrast, if the surface is covered with a thin cuticle layer, the petal is highly wettable (hydrophilic) irrespective of the roughness of the surface. These predictions were supported by the measurements of petal wettability made on flowers of alpine species.ConclusionsThe results indicate that surface roughness caused by epidermal cells and a structured cuticle produces a wide range of petal wettability, and that this can be successfully modelled using a thermodynamic approach.

Project description:The characteristic property of a liquid, discriminating it from a solid, is its fluidity, which can be expressed by a velocity field. The reaction of the velocity field on forces is enshrined in the transport parameter viscosity. In contrast, a solid reacts to forces elastically through a displacement field, the particles are trapped in their potential minimum. The flow in a liquid needs enough thermal energy to overcome the changing potential barriers, which is supported through a continuous rearrangement of surrounding particles. Cooling a liquid will decrease the fluidity of a particle and the mobility of the neighbouring particles, resulting in an increase of the viscosity until the system comes to an arrest. This process with a concomitant slowing down of collective particle rearrangements might already start deep inside the liquid state. The idea of the potential energy landscape provides an attractive picture for these dramatic changes. However, despite the appealing idea there is a scarcity of quantitative assessments, in particular, when it comes to experimental studies. Here we present results on a monatomic liquid metal through a combination of ab initio molecular dynamics, neutron spectroscopy and inelastic x-ray scattering. We investigated the collective dynamics of liquid aluminium to reveal the changes in dynamics when the high temperature liquid is cooled towards solidification. The results demonstrate the main signatures of the energy landscape picture, a reduction in the internal atomic structural energy, a transition to a stretched relaxation process and a deviation from the high-temperature Arrhenius behavior of the relaxation time. All changes occur in the same temperature range at about [Formula: see text], which can be regarded as the temperature when the liquid aluminium enters the landscape influenced phase and enters a more viscous liquid state towards solidification. The similarity in dynamics with other monatomic liquid metals suggests a universal dynamic crossover above the melting point.

Project description:Young's equation is fundamental to the concept of the wettability of a solid surface. It defines the contact angle for a droplet on a solid surface through a local equilibrium at the three-phase contact line. Recently, the concept of a liquid Young's law contact angle has been developed to describe the wettability of slippery liquid-infused porous surfaces (SLIPS) by droplets of an immiscible liquid. In this work, we present a new method to fabricate biphilic SLIP surfaces and show how the wettability of the composite SLIPS can be exploited with a macroscopic wedge-shaped pattern of two distinct lubricant liquids. In particular, we report the development of composite liquid surfaces on silicon substrates based on lithographically patterning a Teflon AF1600 coating and a superhydrophobic coating (Glaco Mirror Coat Zero), where the latter selectively dewets from the former. This creates a patterned base surface with preferential wetting to matched liquids: the fluoropolymer PTFE with a perfluorinated oil Krytox and the hydrophobic silica-based GLACO with olive oil (or other mineral oils or silicone oil). This allows us to successively imbibe our patterned solid substrates with two distinct oils and produce a composite liquid lubricant surface with the oils segregated as thin films into separate domains defined by the patterning. We illustrate that macroscopic wedge-shaped patterned SLIP surfaces enable low-friction droplet self-propulsion. Finally, we formulate an analytical model that captures the dependence of the droplet motion as a function of the wettability of the two liquid lubricant domains and the opening angle of the wedge. This allows us to derive scaling relationships between various physical and geometrical parameters. This work introduces a new approach to creating patterned liquid lubricant surfaces, demonstrates long-distance droplet self-propulsion on such surfaces, and sheds light on the interactions between liquid droplets and liquid surfaces.

Dataset Information

Is There a Relationship between Surface Wettability of Structured Surfaces and Lyophobicity toward Liquid Metals?

Publications

Is There a Relationship between Surface Wettability of Structured Surfaces and Lyophobicity toward Liquid Metals?

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets