Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Transport of Rhodium(III) from Chloride Media across a Polymer Inclusion Membrane Containing an Ionic Liquid Metal Ion Carrier.

ABSTRACT: Efficient and selective transport of rhodium(III) across a polymer inclusion membrane (PIM) from a 0.1 mol dm–3 HCl feed solution, also containing iron(III), to a receiving solution containing 0.1 mol dm–3 HCl and 4.9 mol dm–3 NH4Cl was achieved using a phosphonium-type ionic liquid, trioctyl(dodecyl)phosphonium chloride (P88812Cl), as the metal ion carrier. The optimum PIM composition for the Rh(III) transport was 50 wt % poly(vinylidene-co-hexafluoropropylene) (PVDF-HFP), 30 wt % P88812Cl, and 20 wt % plasticizer 2-nitrophenyl octyl ether (2NPOE). The driving force for the Rh(III) transport was suggested to be the concentration difference of the chloride ion between the feed and the receiving solutions. More than 70% rhodium(III) could be recovered from the receiving solution, and no transport of iron(III) was observed; however, the two metal ions cannot be separated by liquid–liquid extraction. This is the first report of selective transport of rhodium(III) across a polymer inclusion membrane.

SUBMITTER: Hanada T

PROVIDER: S-EPMC7288575 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ion transport and osmotic adjustment in E. coli in response to ionic and non-ionic osmotica

Project description:Bacteria respond to osmotic stress by a substantial increase in the intracellular osmolality, adjusting their cell turgor for altered growth conditions. Using E. coli as a model organism we demonstrate here that bacterial responses to hyperosmotic stress specifically depend on the nature of osmoticum used. We show that increasing acute hyperosmotic NaCl stress above ~1.0 Os kg-1 causes a dose-dependent K+ leak from the cell, resulting in a substantial decrease in cytosolic K+ content and a concurrent accumulation of Na+ in the cell. At the same time, isotonic sucrose or mannitol treatment (non-ionic osmotica) results in a gradual increase of the net K+ uptake. Ion flux data is consistent with growth experiments showing that bacterial growth is impaired by NaCl at the concentration resulting in a switch from net K+ uptake to efflux. Microarray experiments reveal that about 40% of up-regulated genes shared no similarity in their responses to NaCl and sucrose treatment, further suggesting specificity of osmotic adjustment in E. coli to ionic- and non-ionic osmotica The observed differences are explained by the specificity of the stress-induced changes in the membrane potential of bacterial cells highlighting the importance of voltage-gated K+ transporters for bacterial adaptation to hyperosmotic stress.

2008-07-25 | GSE12190 | GEO

Cobalt Extraction from Sulfate/Chloride Media with Trioctyl(alkyl)phosphonium Chloride Ionic Liquids.

Project description:The application of phosphonium-based ionic liquids (ILs) on the selective extraction of cobalt is presented. The extraction mechanism is established, and different parameters of the process are evaluated. It has been found that it is possible to extract cobalt from aqueous solutions in sulfate media, with the addition of sodium chloride, using phosphonium ILs. The cobalt extraction was selective with respect to nickel and strongly dependent on the chloride concentration in the aqueous solution. The cobalt extraction is given by an anion exchange mechanism through an endothermic process. Cobalt extractions greater than 98% were obtained using the proposed methods. Cobalt stripping from the loaded IL phase using water was proved. Therefore, an alternative extraction process to traditional organic solvents is proposed. This alternative has additional advantages such as easy handling, lower costs in reagents and equipment, and risk reduction.

| S-EPMC7097900 | biostudies-literature

A 3D analytical ion transport model for ionic polymer metal composite actuators in large bending deformations.

Project description:Ionic polymer metal composites (IPMCs) are a kind of soft electroactive polymer composites. An IPMC strip commonly has a thin polymer membrane coated with a noble metal as electrodes on both sides. Whenever an electric voltage is applied to the IPMC, it bends and whenever it is deformed, a low voltage is measurable between its electrodes, hence IPMC is an actuator as well as a sensor. They are well known for their promising features like low density, lightness, high toughness and remarkable stimulus strain, also, they have the potential for low-voltage operation while exhibiting acceptable large bending deformation. In this paper, a three-dimensional (3D), dynamic and physics-based model is presented analytically and experimentally for IPMC actuators. The model combines the ion transport dynamics within the IPMC and the bending dynamics of it as a beam under an electrical stimulation. In particular, we present an analytical model to create a relation between the input voltage and the output tip displacement of an IPMC actuator for large bending deformations. Experimental results show that the proposed model captures well the tip displacement.

| S-EPMC7979887 | biostudies-literature

Ionic Liquid Based Polymer Gel Electrolytes for Use with Germanium Thin Film Anodes in Lithium Ion Batteries.

Project description:Thermally stable, flexible polymer gel electrolytes with high ionic conductivity are prepared by mixing the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (C4mpyrTFSI), LiTFSI and poly(vinylidene difluoride-co-hexafluoropropylene (PVDF-HFP). FT-IR and Raman spectroscopy show that an amorphous film is obtained for high (60 %) C4mpyrTFSI contents. Thermogravimetric analysis (TGA) confirms that the polymer gels are stable below ∼300 °C in both nitrogen and air environments. Ionic conductivity of 1.9×10-3 S cm-2 at room temperature is achieved for the 60 % ionic liquid loaded gel. Germanium (Ge) anodes maintain a coulombic efficiency above 95 % after 90 cycles in potential cycling tests with the 60 % C4mpyrTFSI polymer gel.

| S-EPMC6909880 | biostudies-literature

Co-Poly(ionic liquid) Films via Anion Exchange for the Continuous Tunability of Ion Transport and Wettability.

Project description:This manuscript details a novel and simple approach to achieve surface-tethered co-poly(ionic liquid) (coPIL) films through the exchange of the resident anion of a poly(ionic liquid) (PIL) film with two or more anions. Initially, surface-tethered PIL films were prepared by the surface-initiated ring-opening metathesis polymerization of the ionic liquid monomer 3-[(bicyclo[2.2.1]hept-5-en-2-yl)methyl]-1,2-dimethylimidazol-3-ium hexafluorophosphate ([N1-dMIm][PF6]) whose PF6 - anion was easily interchanged with aqueous solutions containing a binary mixture of the PF6 - anion, along with perchlorate (ClO4 -) or bis(fluorosulfonyl)imide (FSI-) anions. The binary mole fraction of each anion in the film was determined from the infrared spectra of the coPIL films. The thermodynamically driven anion selectivity for exchange from the liquid phase into the coPIL films was determined to follow the order ClO4 - < PF6 - < FSI-. The aqueous wettability of p[N1-dMIm] coPIL films containing both the PF6 - and ClO4 - anions (p[N1-dMIm][PF6][ClO4]) was quantified by contact angle goniometry with the observation that the surface showed an enrichment in the ClO4 - anion compared to the average binary anion mole fraction of ClO4 - in the film (y ClO4 - ). The rate of ion transport through the p[N1-dMIm][PF6][ClO4] coPIL films, quantified by electrochemical impedance spectroscopy, linearly depends on the binary anion mole fraction of ClO4 - in solution (x ClO4 - ), enabling continuous tunability by over three orders of magnitude for ion conductivity in the coPIL films.

| S-EPMC6644295 | biostudies-literature

Ion rectification based on gel polymer electrolyte ionic diode.

Project description:Biological ion channels rely on ions as charge carriers and unidirectional ion flow to produce and transmit signals. To realize artificial biological inspired circuitry and seamless human-machine communication, ion-transport-based rectification devices should be developed. In this research, poly(methyl methacrylate) (PMMA) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) gel polymer electrolytes (GPEs) are assembled to construct a novel ionic diode, enabling ion rectification through ion-diffusion/migration that emulates biological systems. This ion rectification results from the different diffusion/migration behaviors of mobile ions transporting in the GPE heterojunction. The electrical tests of the GPE heterojunction reveal outstanding rectifying ratio of 23.11. The GPE ionic diode operates in wide temperature window, from -20 °C (anti-freezing) to 125 °C (thermal tolerance). The absence of redox reactions is verified in the cyclic voltammogram. The GPE ionic diodes are used to construct ionic logic gates for signal communication. Furthermore, rectification of a triboelectric nanogenerator and potential for synaptic devices are demonstrated.

| S-EPMC9637189 | biostudies-literature

Ultrasound-assisted of alkali chloride separation using bulk ionic liquid membrane.

Project description:An ultrasonic-assisted separation of alkali chloride (LiCl, NaCl, and KCl) salts have been carried out using of an hydrophobic ionic liquid membrane (ILM). The ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate and tributyl phosphate mixture have been used as ILM. An ultrasonic probe with different frequencies (25, 100, and 250) kHz have been applied as source of ultrasound generator with different times of sonication (2, 5, and 10) min in three phases system containing feed, ILM, and receiver in osmotic U-shaped tube. Also, 250, 500, and 1000 ppm of the feed (alkali chloride) concentration have been used to separate. The frequency of 250 kHz with higher sonication time provides optimum condition for separation of LiCl with lower feed concentration. The thermodynamic properties such as density and speed of sound and the related thermodynamic properties have been calculated to optimize ILM composition (xIL = 0.45) for ultrasound-separation.

| S-EPMC8091055 | biostudies-literature

Electrodeposition of indium from the ionic liquid trihexyl(tetradecyl)phosphonium chloride.

Project description:The electrochemical behavior of indium in the ionic liquid trihexyl(tetradecyl)phosphonium chloride (Cyphos IL 101) was studied. Cyphos IL 101 first had to be purified, as the impurities present in commercial Cyphos IL 101 interfered with the electrochemical measurements. Electrochemical deposition of indium metal from this electrolyte occurs without hydrogen evolution, increasing the cathodic current efficiency compared to deposition from water and avoiding porosity within the deposited metal. Indium(iii) is the most stable oxidation state in the ionic liquid. This ion is reduced in two steps, first from indium(iii) to indium(i) and subsequently to indium(0). The high thermal stability of Cyphos IL 101 allowed the electrodeposition of indium at 120 °C and 180 °C. At 180 °C indium was deposited as liquid indium which allows for the easy separation of the indium and the possibility to design a continuous electrowinning process. On molybdenum, indium deposits as liquid droplets even below the melting point of indium. This was explained by the combination of melting point depression and undercooling. The possibility to separate indium from iron and zinc by electrodeposition was tested. It is possible to separate indium from zinc by electrodeposition, but iron deposits together with indium.

| S-EPMC6592163 | biostudies-literature

Graphene/Ionic liquid composite films and ion exchange.

Project description:Wettability of graphene is adjusted by the formation of various ionic surfaces combining ionic liquid (IL) self-assembly with ion exchange. The functionalized ILs were designed and synthesized with the goal of obtaining adjustable wettability. The wettability of the graphene surface bearing various anions was measured systematically. The effect of solvent systems on ion exchange ratios on the graphene surface has also been investigated. Meanwhile, the mechanical properties of the graphene/IL composite films were investigated on a nanometer scale. The elasticity and adhesion behavior of the thin film was determined with respected to the indentation deformation by colloid probe nanoindentation method. The results indicate that anions played an important role in determining graphene/IL composite film properties. In addition, surface wetting and mechanics can be quantitatively determined according to the counter-anions on the surface. This study might suggest an alternate way for quantity detection of surface ions by surface force.

| S-EPMC4073168 | biostudies-other

Pharmaceutical Functionalization of Monomeric Ionic Liquid for the Preparation of Ionic Graft Polymer Conjugates.

Project description:Polymerizable choline-based ionic liquid (IL), i.e., [2-(methacryloyloxy)ethyl]-trimethylammonium (TMAMA/Cl¯), was functionalized by an ion exchange reaction with pharmaceutical anions, i.e., cloxacillin (CLX¯) and fusidate (FUS¯), as the antibacterial agents. The modified biocompatible IL monomers (TMAMA/CLX¯, TMAMA/FUS¯) were copolymerized with methyl methacrylate (MMA) to prepare the graft copolymers (19-50 mol% of TMAMA units) serving as the drug (co)delivery systems. The in vitro drug release, which was driven by the exchange reaction of the pharmaceutical anions to phosphate ones in PBS medium, was observed for 44% of CLX¯ (2.7 μg/mL) and 53% of FUS¯ (3.6 μg/mL) in the single systems. Similar amounts of released drugs were detected for the dual system, i.e., 41% of CLX¯ (2.2 μg/mL) and 33% of FUS¯ (2.0 μg/mL). The investigated drug ionic polymer conjugates were examined for their cytotoxicity by MTT test, showing a low toxic effect against human bronchial epithelial cells (BEAS-2B) and normal human dermal fibroblasts (NHDF) as the normal cell lines. The satisfactory drug contents and the release profiles attained for the well-defined graft polymers with ionically bonded pharmaceuticals in the side chains make them promising drug carriers in both separate and combined drug delivery systems.

| S-EPMC9735495 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data