Dataset Information

Comprehensive Chemical Characterization of the Aerosol Emissions of a Vaping Product Based on a New Technology.

ABSTRACT: Around 10 million people in the United States and 3 million people in the United Kingdom are estimated to use vaping category products. There are some estimates that there will be 75-80 million vapers worldwide by 2020. Most of these products are based on coil-and-wick technology. Because the heating and aerosol formation are separate processes, the system can lead to dry-wicking and elevated emission of carbonyls if designed and/or manufactured poorly. Low-nicotine and low-power coil-and-wick devices have also been linked to increased exposure to formaldehyde due to compensatory behavior by users. We characterized the emissions of a vaping product which uses a fabric-free stainless-steel mesh distiller plate technology that heats and aerosolizes the e-liquid in a single process. The plate has a microporous structure for capillary-induced liquid transformation (wicking) and aerosolization that is optimized to avoid fluid starvation and overheating and improved control. Compared with emissions previously reported for a coil-and-wick nicotine vaping product (e-cigarette), most classes of harmful and potentially harmful constituents (HPHCs) from this vaping product were below the level of detection or quantification. For those that were quantifiable, this vaping product generally had lower levels of emissions than the e-cigarette, including carbonyls. Formaldehyde and methyl glyoxal levels did not differ significantly between vaping products. In this system, the single mode of liquid transfer and vapor formation permits high aerosol mass delivery but further reduces emissions of HPHCs that may be present in conventional e-cigarette aerosol, by lessening the risk of thermal breakdown of the aerosol-generating solvent mixture.

SUBMITTER: Nicol J

PROVIDER: S-EPMC7308067 | biostudies-literature | 2020 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Comprehensive Chemical Characterization of the Aerosol Emissions of a Vaping Product Based on a New Technology.

Nicol James J Fraser Rory R Walker Liam L Liu Chuan C Murphy James J Proctor Christopher John CJ

Chemical research in toxicology 20200303 3

Around 10 million people in the United States and 3 million people in the United Kingdom are estimated to use vaping category products. There are some estimates that there will be 75-80 million vapers worldwide by 2020. Most of these products are based on coil-and-wick technology. Because the heating and aerosol formation are separate processes, the system can lead to dry-wicking and elevated emission of carbonyls if designed and/or manufactured poorly. Low-nicotine and low-power coil-and-wick d ...[more]

PMID: 32122129

Similar Datasets

Project description:IntroductionCharacterization of aerosols generated by electronic cigarettes (e-cigarettes) is one method used to evaluate the safety of e-cigarettes. While some researchers have modified smoking machines for e-cigarette aerosol generation, these machines are either not readily available, not automated for e-cigarette testing or have not been adequately described. The objective of this study was to build an e-cigarette vaping machine that can be used to test, under standard conditions, e-liquid aerosolization and nicotine and toxicant delivery.MethodsThe vaping machine was assembled from commercially available parts, including a puff controller, vacuum pump, power supply, switch to control current flow to the atomizer, three-way value to direct air flow to the atomizer, and three gas dispersion tubes for aerosol trapping. To validate and illustrate its use, the variation in aerosol generation was assessed within and between KangerTech Mini ProTank 3 clearomizers, and the effect of voltage on aerosolization and toxic aldehyde generation were assessed.ResultsWhen using one ProTank 3 clearomizer and different e-liquid flavors, the coefficient of variation (CV) of aerosol generated ranged between 11.5% and 19.3%. The variation in aerosol generated between ProTank 3 clearomizers with different e-liquid flavors and voltage settings ranged between 8.3% and 16.3% CV. Aerosol generation increased linearly at 3-6V across e-liquids and clearomizer brands. Acetaldehyde, acrolein, and formaldehyde generation increased markedly at voltages at or above 5V.ConclusionThe vaping machine that we describe reproducibly aerosolizes e-liquids from e-cigarette atomizers under controlled conditions and is useful for testing of nicotine and toxicant delivery.ImplicationsThis study describes an electronic cigarette vaping machine that was assembled from commercially available parts. The vaping machine can be replicated by researchers and used under standard conditions to generate e-cigarette aerosols and characterize nicotine and toxicant delivery.

Project description:Currently, there is a lack of comprehensive data on the diversity of chemicals present in vaping liquids. To address this gap, a non-targeted analysis of 825 vaping liquids collected between 2017 and 2019 from Canadian retailers was conducted. Prior to mass spectrometry analysis, samples were diluted 1:500 v/v with methanol or acetonitrile. Chemical compound separation and analysis was carried out using gas chromatography and triple quadrupole mass spectrometry (GC-MS/MS) systems operated in the full scan mode and mass range of 35-450 m/z. Mass spectrum for each sample was obtained in electron ionization at 70 eV and processed. Non-targeted identification workflow included use of automated mass spectral deconvolution and identification system (AMDIS), where required, as well as a number of commercially available spectral libraries. In order to validate identities, an in-house database of expected compounds previously detected in vaping liquids was used along with genuine analytical standards for compounds of interest. This resulted in a dataset of over 1,500 unique detected chemicals. Approximately half of these chemical compounds were detected only once in a single product and not in multiple products analyzed. For any sample analyzed, on average, 40% of the chemical constituents appeared to have flavouring properties. The remainder were nicotine and related alkaloids, processing, degradation or indirect additives, natural extractives and compounds with unknown roles. Data published here from the project on the Open Characterization of vaping liquids is unique as it offers a detailed understanding of products' flavour chemical profiles, the presence and frequency of chemicals of potential health concern, as well as trends and changes in products' chemical complexity over a three-year period. Non-targeted chemical surveillance such as this present valuable tools to public health officials and researchers in responding to emergent issues such as vaping associated lung injury or informing chemical based strategies which may be aimed at addressing product safety or appeal.

Dataset Information

Comprehensive Chemical Characterization of the Aerosol Emissions of a Vaping Product Based on a New Technology.

Publications

Comprehensive Chemical Characterization of the Aerosol Emissions of a Vaping Product Based on a New Technology.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets