Dataset Information

Self-Healing Analysis of Half-Warm Asphalt Mixes Containing Electric Arc Furnace (EAF) Slag and Reclaimed Asphalt Pavement (RAP) using a Novel Thermomechanical Healing Treatment.

ABSTRACT: Nowadays, the self-healing of asphalt pavements promoted by microwave radiation heating energy is gaining attention and strength in the scientific community. However, most of these studies are only conceptual and, thus, remain shrouded in uncertainty regarding technology development, economy, and application effect. Therefore, there are several efforts underway to offer more effective assisted healing treatments that are capable of overcoming such uncertainties. This paper aims to assess and quantify the healing performance rates (HR) of half-warm recycled asphalt (HWRA) mixtures containing electric arc furnace (EAF) slag and total recycled asphalt pavement (RAP) rates. To this end, a novel assisted thermomechanical healing treatment (i.e., a recompaction-based technique and microwave heating energy) was put forward to promote the potential healing effect of this treatment on the mechanical properties of the asphalt mixtures. In order to do this, three microwave heating temperatures (25 °C, 60 °C, and 80 °C) and three mechanical recompaction levels (0, 25, and 50 gyrations) were selected. After that, the healing performance rates (%, HR) of the asphalt mixtures were calculated by repeated indirect tensile strength (ITS) and indirect tensile stiffness modulus (ITSM). The results indicated that the 8% EAF slag mixture was found to provide significant microwave heating energy savings by up to 69% compared with the benchmark 100% RAP mixture, and, at the same time, it experienced a remarkable stiffness recovery response of 140% of the initial mechanical properties. These findings encourage greater confidence in promoting this innovative thermomechanical-based healing treatment for in-situ surface course asphalt mixtures of road pavements.

SUBMITTER: Lizarraga JM

PROVIDER: S-EPMC7321439 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Self-Healing Analysis of Half-Warm Asphalt Mixes Containing Electric Arc Furnace (EAF) Slag and Reclaimed Asphalt Pavement (RAP) using a Novel Thermomechanical Healing Treatment.

Lizárraga José Manuel JM Gallego Juan J

Materials (Basel, Switzerland) 20200530 11

Nowadays, the self-healing of asphalt pavements promoted by microwave radiation heating energy is gaining attention and strength in the scientific community. However, most of these studies are only conceptual and, thus, remain shrouded in uncertainty regarding technology development, economy, and application effect. Therefore, there are several efforts underway to offer more effective assisted healing treatments that are capable of overcoming such uncertainties. This paper aims to assess and qua ...[more]

PMID: 32486246

Similar Datasets

Project description:The interfacial adhesion between asphalt and steel slag aggregate is a decisive factor in the formation of an asphalt-steel slag mixture and significantly affects the quality stability of steel slag-asphalt mixtures. In this study, the adhesion between an asphalt and steel slag aggregate, the interfacial microstructure, the adsorption and desorption characteristics, and chemical reactions were, respectively, explored by a PosiTestAT-A adhesion puller, a scanning electron microscope, a net adsorption test, an infrared spectrometer, and a dynamic shear rheometer. The mechanism of adhesion between the asphalt and steel slag aggregate was analyzed from the perspectives of physical adsorption and chemical reactions. The results showed that different factors had different effects on the adhesion of asphalt-steel slag aggregate interface. The freeze-thaw cycle and steel slag aggregate particle size had significant effects on interfacial adhesion, while the asphalt heating temperature, water bath time, and stirring time had relatively weak effects on interfacial adhesion. Compared to a limestone aggregate, the steel slag-asphalt mixture had greater adhesion and better adhesion performance because the pits and textures on the surface of the steel slag aggregate produced a skeleton-like effect that strengthened the phase strength of the asphalt-slag aggregate interface, thereby improving the adhesion and increasing the physical adsorption between the asphalt and steel slag aggregate. In addition, due to the N-H stretching vibrations of the amines and amides, as well as SiO-H stretching vibrations, a chemical reaction occurred between the asphalt and steel slag aggregate, thus improving the adhesion performance between the asphalt and steel slag. Based on the shape of the adsorption isotherm, it was determined that the adsorption type was multi-molecular layer adsorption, indicating that the adhesion between the asphalt and steel slag mainly involved physical adsorption.

Dataset Information

Self-Healing Analysis of Half-Warm Asphalt Mixes Containing Electric Arc Furnace (EAF) Slag and Reclaimed Asphalt Pavement (RAP) using a Novel Thermomechanical Healing Treatment.

Publications

Self-Healing Analysis of Half-Warm Asphalt Mixes Containing Electric Arc Furnace (EAF) Slag and Reclaimed Asphalt Pavement (RAP) using a Novel Thermomechanical Healing Treatment.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets