Dataset Information

Laser induced diffuse reflectance imaging - Monte Carlo simulation of backscattering measured on the surface.

ABSTRACT: The Monte Carlo simulation algorithm of photon trajectory computation is implemented in object oriented R code. Diffuse reflectance, also called backscattering, is modeled in semi-infinite homogeneous media. Spatial photon flux leaving the surface of the media is collected. The profile of intensity along radii relative to the incident point is used to simulate measurement of computer vision systems. Four optical parameters of the media are used: absorption coefficient, scattering coefficient, anisotropy factor and refractive index. Five parameters are used to describe configuration of the vision system: number of photons, radius of circular light beam, limiting energy level of photons, radius of observed area, spatial resolution of the vision system.•The incident angle of the light beam is included in the photon launch procedure. Initial direction is typically assumed to be normal with x,y,z coordinates of 0,0,1. In the proposed modification, initial move vector is calculated based on the incident angle and refractive index of the media. Additionally, elliptic distortion of the circular light beam on the surface is calculated based on the incident angle.•Photon flux leaving media through the surface is corrected with Lambertian method to measure intensity captured by an imaging device in normal position.•The software implementing the method is written in R language, the R code is available as standard package.

SUBMITTER: Baranyai L

PROVIDER: S-EPMC7327276 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Laser induced diffuse reflectance imaging - Monte Carlo simulation of backscattering measured on the surface.

Baranyai László L

MethodsX 20200618

The Monte Carlo simulation algorithm of photon trajectory computation is implemented in object oriented R code. Diffuse reflectance, also called backscattering, is modeled in semi-infinite homogeneous media. Spatial photon flux leaving the surface of the media is collected. The profile of intensity along radii relative to the incident point is used to simulate measurement of computer vision systems. Four optical parameters of the media are used: absorption coefficient, scattering coefficient, an ...[more]

PMID: 32637331

Similar Datasets

Project description:PurposeThe need for high-fidelity modeling of radiation detectors to perform reliable detector performance optimization using Monte Carlo simulations requires to accurately simulate the light transport in the scintillator and the light collection by the photodetector. In this work, we implement our well-validated crystal reflectance model computed from three-dimensional (3D) crystal surface measurement in a standalone open-source application to allow researchers to generate fully customized crystal reflectance look-up-tables (LUTs) to be used in optical Monte Carlo simulation.MethodsThe LUTDavisModel application can be installed in a few minutes on Windows, macOS, and Linux, using 26 MB of space. MATLAB Runtime is required and is automatically installed with the application. The core algorithm has been previously validated experimentally and implemented in GATE v8.0. The standalone is divided into five panels, each of which performing a specific task: generate LUTs from a combination of surface type, scintillator, and coupling medium available in the database (such as LSO or BGO) or custom; compute LUTs with the reflectors available and custom coupling thickness; create a mixture of coupling media to account for possible defects in the optical coupling; plot precomputed LUTs for visual comparison. Tooltips and errors/warnings facilitate the navigation. The reported computational times were obtained with an Intel Core i7 MacBook Pro.ResultsLUTs can be generated with computational time ranging from a few minutes to several hours depending on the selected surface, sampling, and computational power. A longer time is needed when using rough surfaces and thick coupling media (hundreds of μm ) due to increased photon tracking.ConclusionsWe developed a user-friendly standalone application to generate LUTs that can be used inside GATE Monte Carlo simulations. It can be easily downloaded, installed, and used. Future optimizations will expand the database, decrease the computational time through greater parallelization, and include the generation of LUTs to study Cerenkov photons transport.

Project description:Traditional multiple-group confirmatory factor analysis (multiple-group CFA) is usually criticized for having too restrictive model assumption, namely the scalar measurement invariance. The new multiple-group analysis methodology, alignment, has become an effective alternative. The alignment evaluates measurement invariance and more importantly, permits factor mean comparisons without requiring scalar invariance which is usually required in traditional multiple-group CFA. Some simulation studies and empirical studies have investigated the applicability of alignment under different conditions, but some areas remain unexplored. Based on the simulation studies of Asparouhov and Muthén and of Flake and McCoach, this current simulation study is broken into two sections. The first study investigates the minimal group sizes required for alignment in three-factor models. The second study compares the performance of multiple-group CFA, multiple-group exploratory structural equation model (multiple-group ESEM), and alignment by including different proportions and magnitudes of cross-loadings in the models. Study 1 shows that when the model has no noninvariant parameters, the alignment requires relatively lower group sizes. Explicitly, the minimal group size required for alignment was 250 when the amount of groups was three, the minimal group size was 150 when the amount of groups was nine, and 200 when the amount of groups was 15. When there are noninvariant parameters in the model and the amount of groups is low, a group size of 350 is a safe rule of thumb. When there are noninvariant parameters in the model and the amount of groups is high, a group size of 250 is required for trustworthy results. The magnitude of noninvariance and the noninvariance rate do not affect the minimal group size required for alignment. Study 2 shows that multiple-group CFA provides accurate factor mean estimates when each factor had 20% factor loading (1 factor loading) with small-sized cross-loading. Multiple-group ESEM provides accurate factor mean estimates when the magnitude of cross-loading is small or when each factor had 20% factor loading (1 factor loading) with medium-sized cross-loading. Alignment provides accurate factor mean estimates when there are only small-sized cross-loadings in the model. The parameter estimates, coverage rates and ratios of average standard error to standard deviation for each methodology are not influenced by the amount of groups. Recommendations are concluded for using multiple-group CFA, multiple-group ESEM, traditional alignment and aligned ESEM (AESEM) based on the results. Multiple-group CFA is more suitable for use when scalar invariance is established. Multiple-group ESEM works best when there are small-sized or only a few medium-sized cross-loadings in the model. Traditional alignment allows for small-sized cross-loadings and a few noninvariant parameters in the model. AESEM integrates the advantages of alignment and ESEM, can provide accurate estimates when noninvariant parameters and cross-loadings both exist in the model. Compared to multiple-group CFA, multiple-group ESEM, the alignment methodology performs well in more situations.

Dataset Information

Laser induced diffuse reflectance imaging - Monte Carlo simulation of backscattering measured on the surface.

Publications

Laser induced diffuse reflectance imaging - Monte Carlo simulation of backscattering measured on the surface.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets