The plant dehydrin Lti30 stabilizes lipid lamellar structures in varying hydration conditions.
Ontology highlight
ABSTRACT:
SUBMITTER: Andersson JM
PROVIDER: S-EPMC7328047 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Lipid bilayer interactions are essential to a vast range of biological functions, such as intracellular transport mechanisms. Surface charging mediated by concentration dependent ion adsorption and desorption on lipid headgroups alters electric double layers as well as van der Waals and steric hydration forces of interacting bilayers. Here, we directly measure bilayer interactions during charge modulation in a symmetrically polarized electrochemical three-mirror interferometer surface forces apparatus. We quantify polarization and concentration dependent hydration and electric double layer forces due to cation adsorption/desorption. Our results demonstrate that exponential hydration layer interactions effectively describe surface potential dependent surface forces due to cation adsorption at high salt concentrations. Hence, electric double layers of lipid bilayers are exclusively dominated by inner Helmholtz charge regulation under physiological conditions. These results are important for rationalizing bilayer behavior under physiological conditions, where charge and concentration modulation may act as biological triggers for function and signaling.
| S-EPMC8488952 | biostudies-literature
Project description:BackgroundOne crucial factor in skin tissue engineering is to understand the hydration and barrier property of skin. We investigated the skin hydration and stabilization strategy of inter-lamellar structure of stratum corneum (SC) using poly (2-methacryloyloxyethyl phosphorylcholine) (PMPC).MethodsThe unique hydration and stabilization potency of PMPC on the barrier function of the SC examined using freshly excised hairless mouse skin as a model membrane and the relationship between the stabilization of the lipid lamellar bilayer (LLB) and its enhanced water holding capacity was established.ResultsDifferential scanning calorimeter based on the phase-transition temperature of lipid domain of SC demonstrated that PMPC stabilized the LLB. The ratio of the heat of lipid phase transition (△H) of SC exposed to water and PMPC for 24 h was 1.51. X-ray crystallography showed the presence of well- organized lipids in intercellular membranes exhibiting short and long periodicity of lamellar phases. The peak at 4.4 nm attributed to the long periodicity phase (LPP) was missing in water-treated SC, where, the presence of 4.2- 4.4 nm peak in PMPC treated SC indicated that PMPC stabilized LPP. Transmission electron microscopy study demonstrated that the LLB structure became more rigid and orderly in PMPC treated SC.ConclusionThe unique ion paired structure of PMPC enhances the barrier function of the SC by stabilizing LLB structure and hydration by inducing weakly bound water. The unique hydration state and stabilization effect from extended water exposure could provide a valuable information to prepare reliable artificial skin matrix and skin tissue.
| S-EPMC8599549 | biostudies-literature
Project description:Using LAURDAN spectral imaging and spectral phasor analysis we concurrently studied the growth and hydration state of subcellular organelles (lamellar body-like, LB-like) from live A549 lung cancer cells at different post-confluence days. Our results reveal a time dependent two-step process governing the size and hydration of these intracellular LB-like structures. Specifically, a first step (days 1 to 7) is characterized by an increase in their size, followed by a second one (days 7 to 14) where the organelles display a decrease in their global hydration properties. Interestingly, our results also show that their hydration properties significantly differ from those observed in well-characterized artificial lamellar model membranes, challenging the notion that a pure lamellar membrane organization is present in these organelles at intracellular conditions. Finally, these LB-like structures show a significant increase in their hydration state upon secretion, suggesting a relevant role of entropy during this process.
| S-EPMC5045802 | biostudies-literature
Project description:Liquid perfluorocarbon nanodroplets (NDs) are an attractive alternative to microbubbles (MBs) for ultrasound-mediated therapeutic and diagnostic applications. ND size and size distribution have a strong influence on their behaviour in vivo, including extravasation efficiency, circulation time, and response to ultrasound stimulation. Thus, it is desirable to identify ways to tailor the ND size and size distribution during manufacturing. In this study phospholipid-coated NDs, comprising a perfluoro-n-pentane (PFP) core stabilised by a DSPC/PEG40s (1,2-distearoyl-sn-glycero-3-phosphocholine and polyoxyethylene(40)stearate, 9:1 molar ratio) shell, were produced in phosphate-buffered saline (PBS) by sonication. The effect of the following production-related parameters on ND size was investigated: PFP concentration, power and duration of sonication, and incorporation of a lipophilic fluorescent dye. ND stability was also assessed at both 4 °C and 37 °C. When a sonication pulse of 6 s and 15% duty cycle was employed, increasing the volumetric concentration of PFP from 5% to 15% v/v in PBS resulted in an increase in ND diameter from 215.8 ± 16.8 nm to 408.9 ± 171.2 nm. An increase in the intensity of sonication from 48 to 72 W (with 10% PFP v/v in PBS) led to a decrease in ND size from 354.6 ± 127.2 nm to 315.0 ± 100.5 nm. Increasing the sonication time from 20 s to 40 s (using a pulsed sonication with 30% duty cycle) did not result in a significant change in ND size (in the range 278-314 nm); however, when it was increased to 60 s, the average ND diameter reduced to 249.7 ± 9.7 nm, which also presented a significantly lower standard deviation compared to the other experimental conditions investigated (i.e., 9.7 nm vs. > 49.4 nm). The addition of the fluorescent dye DiI at different molar ratios did not affect the ND size distribution. NDs were stable at 4 °C for up to 6 days and at 37 °C for up to 110 min; however, some evidence of ND-to-MB phase transition was observed after 40 min at 37 °C. Finally, phase transition of NDs into MBs was demonstrated using a tissue-mimicking flow phantom under therapeutic ultrasound exposure conditions (ultrasound frequency: 0.5 MHz, acoustic pressure: 2-4 MPa, and pulse repetition frequency: 100 Hz).
| S-EPMC7901031 | biostudies-literature
Project description:Hydration shells of normal proteins display regions of highly structured water as well as patches of less structured bulk-like water. Recent studies suggest that isomers with larger surface densities of patches of bulk-like water have an increased propensity to aggregate. These aggregates are toxic to the cellular environment. Hence, the early detection of these toxic deposits is of paramount medical importance. We show that various morphological states of association of such isomers can be differentiated from the normal protein background based on the characteristic partition between bulk, caged, and surface hydration water and the magnetic resonance (MR) signals of this water. We derive simple mathematical equations relating the compartmentalization of water to the local hydration fraction and the packing density of the newly formed molecular assemblies. Then, we employ these equations to predict the MR response of water constrained by protein aggregation. Our results indicate that single units and compact aggregates that contain no water between constituents induce a shift of the MR signal from normal protein background to values in the hyperintensity domain (bright spots), corresponding to bulk water. In contrast, large plaques that cage significant amounts of water between constituents are likely to generate MR responses in the hypointensity domain (dark spots), typical for strongly correlated water. The implication of these results is that amyloids can display both dark and bright spots when compared to the normal gray background tissue on MR images. In addition, our findings predict that the bright spots are more likely to correspond to amyloids in their early stage of development. The results help explain the MR contrast patterns of amyloids and suggest a new approach for identifying unusual protein aggregation related to disease.
| S-EPMC2603265 | biostudies-other
Project description:The structure of a DNA-dimethyldidodecylammonium bromide (DDAB) film was recently described to undergo a distinctive transition in response to the water content in the surrounding environment. The existence, preparation, and basic properties of DNA-surfactant films have been known in the literature for some time. Here, we describe the structural response of DNA-DDAB films to environmental changes, particularly temperature and humidity, in greater detail revealing new structural states. We can direct the lamellar structure of the film into three distinct states--double-stranded DNA (dsDNA) paired with an interdigitated bilayer of DDAB (bDDAB), single-stranded DNA (ssDNA) with monolayer of DDAB (mDDAB), and ssDNA with bDDAB. Both temperature and humidity cause the molecules composing the lamellar structure to change reversibly from ssDNA to dsDNA and/or from mDDAB to bDDAB. We found that the structural transition from dsDNA to ssDNA and bDDAB to mDDAB is concerted and follows apparent first-order kinetics. We also found that the double-stranded conformation of DNA in the film can be stabilized with the inclusion of cholesterol even while the DDAB in the film is able to form either a monolayer or bilayer depending on the environmental conditions. Films treated with ethidium bromide prompt switching of dsDNA to ssDNA before bDDAB transitions to mDDAB. Swelling experiments have determined that there is a direct proportionality between the macroscopic increase in volume and the nanoscopic increase in lamellar spacing when a film is allowed to swell in water. Finally, experiments with phosphate-buffered saline (PBS) indicate that the films can disassemble in a simulated biological environment due to screening of their charges by buffer salt. We conclude that the structure of DNA in the film depends on the water content (as measured by the relative humidity) and temperature of the environment, while the state of DDAB depends essentially only on the water content. The structure of the film is quite flexible and can be altered by changing environmental conditions as well as the chemical ingredients. These films will have useful, new applications as responsive materials, for example, in drug and gene delivery.
| S-EPMC2895560 | biostudies-literature
Project description:Piezocrystals, especially the relaxor-based ferroelectric crystals, have been subject to intense investigation and development within the past three decades, motivated by the performance advantages offered by their ultrahigh piezoelectric coefficients and higher electromechanical coupling coefficients than piezoceramics. Structural anisotropy of piezocrystals also provides opportunities for devices to operate in novel vibration modes, such as the d36 face shear mode, with domain engineering and special crystal cuts. These piezocrystal characteristics contribute to their potential usage in a wide range of low- and high-power ultrasound applications. In such applications, conventional piezoelectric materials are presently subject to varying mechanical stress/pressure, temperature and electric field conditions. However, as observed previously, piezocrystal properties are significantly affected by a single such condition or a combination of conditions. Laboratory characterisation of the piezocrystal properties under these conditions is therefore essential to fully understand these materials and to allow electroacoustic transducer design in realistic scenarios. This will help to establish the extent to which these high performance piezocrystals can replace conventional piezoceramics in demanding applications. However, such characterisation requires specific experimental arrangements, examples of which are reported here, along with relevant results. The measurements include high frequency-resolution impedance spectroscopy with the piezocrystal material under mechanical stress 0-60 MPa, temperature 20-200 °C, high electric AC drive and DC bias. A laser Doppler vibrometer and infrared thermal camera are also integrated into the measurement system for vibration mode shape scanning and thermal conditioning with high AC drive. Three generations of piezocrystal have been tested: (I) binary, PMN-PT; (II) ternary, PIN-PMN-PT; and (III) doped ternary, Mn:PIN-PMN-PT. Utilising resonant mode analysis, variations in elastic, dielectric and piezoelectric constants and coupling coefficients have been analysed, and tests with thermal conditioning have been carried out to assess the stability of the piezocrystals under high power conditions.
| S-EPMC5458827 | biostudies-other
Project description:The G-quadruplex is a noncanonical fold of DNA commonly found at telomeres and within gene promoter regions of the genome. These guanine-rich sequences are highly susceptible to damages such as base oxidation and depurination, leading to abasic sites. In the present work, we address whether a vacancy, such as an abasic site, in a G-quadruplex serves as a specific ligand recognition site. When the G-tetrad is all guanines, the vacant (abasic) site is recognized and bound by free guanine nucleobase. However, we aim to understand whether the preference for a specific ligand recognition changes with the presence of a guanine oxidation product 8-oxo-7,8-dihydroguanine (OG) adjacent to the vacancy in the tetrad. Using molecular dynamics simulation, circular dichroism, and nuclear magnetic resonance, we examined the ability for riboflavin to stabilize abasic site-containing G-quadruplex structures. Through structural and free energy binding analysis, we observe riboflavin's ability to stabilize an abasic site-containing G-quadruplex only in the presence of an adjacent OG-modified base. Further, when compared to simulation with the vacancy filled by free guanine, we observe that the free guanine nucleobase is pushed outside of the tetrad by OG to interact with other parts of the structure, including loop residues. These results support the preference of riboflavin over free guanine to fill an OG-adjacent G-quadruplex abasic vacancy.
| S-EPMC8851688 | biostudies-literature
Project description:Acyl-lipids are vital components for all life functions of plants. They are widely studied using often in vitro conditions to determine inter alia the impact of genetic modifications and the description of biochemical and physiological functions of enzymes responsible for acyl-lipid metabolism. What is currently lacking is knowledge of if these results also hold in real environments-in in vivo conditions. Our study focused on the comparative analysis of both in vitro and in vivo growth conditions and their impact on the acyl-lipid metabolism of Camelina sativa leaves. The results indicate that in vitro conditions significantly decreased the lipid contents and influenced their composition. In in vitro conditions, galactolipid and trienoic acid (16:3 and 18:3) contents significantly declined, indicating the impairment of the prokaryotic pathway. Discrepancies also exist in the case of acyl-CoA:lysophospholipid acyltransferases (LPLATs). Their activity increased about 2-7 times in in vitro conditions compared to in vivo. In vitro conditions also substantially changed LPLATs' preferences towards acyl-CoA. Additionally, the acyl editing process was three times more efficient in in vitro leaves. The provided evidence suggests that the results of acyl-lipid research from in vitro conditions may not completely reflect and be directly applicable in real growth environments.
| S-EPMC8472737 | biostudies-literature
Project description:Abiotic stress has a significant impact on plant growth and development. It causes changes in the subcellular organelles, which, due to their stress sensitivity, can be affected. Cellular components involved in the abiotic stress response include dehydrins, widely distributed proteins forming a class II of late embryogenesis abundant protein family with characteristic properties including the presence of evolutionarily conserved sequence motifs (including lysine-rich K-segment, N-terminal Y-segment, and often phosphorylated S motif) and high hydrophilicity and disordered structure in the unbound state. Selected dehydrins and few poorly characterized dehydrin-like proteins participate in cellular stress acclimation and are also shown to interact with organelles. Through their functioning in stabilizing biological membranes and binding reactive oxygen species, dehydrins and dehydrin-like proteins contribute to the protection of fragile organellar structures under adverse conditions. Our review characterizes the participation of plant dehydrins and dehydrin-like proteins (including some organellar proteins) in plant acclimation to diverse abiotic stress conditions and summarizes recent updates on their structure (the identification of dehydrin less conserved motifs), classification (new proposed subclasses), tissue- and developmentally specific accumulation, and key cellular activities (including organellar protection under stress acclimation). Recent findings on the subcellular localization (with emphasis on the mitochondria and plastids) and prospective applications of dehydrins and dehydrin-like proteins in functional studies to alleviate the harmful stress consequences by means of plant genetic engineering and a genome editing strategy are also discussed.
| S-EPMC10358736 | biostudies-literature