Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Photoluminescent, Ferromagnetic, and Hydrophobic Sponges for Oil–Water Separation.

ABSTRACT: To find a facile way to produce a hydrophobic sponge that can effectively absorb oils is urgent to resolve the environmental pollution and ecological disaster caused by oil spillage. Here, alkylated carbon dots (C dots) were prepared from pyrolysis of a mixture of dodecylamine and citric acid followed by purification through silica gel column chromatography. Polyurethane sponge was modified by alkylated C dots by a simple dip-coating method, which endows the photoluminescent and hydrophobic sponge with good absorption capacities for various oils and nonpolar organic solvents with high recyclability. The water contact angle of the modified sponge can reach 138.8°. Interestingly, the sponge enables visual absorption under UV irradiation in the dark, which has not been achieved by other carbon-based adsorbents. The sponge was further made ferromagnetic by introducing alkylated Fe3O4 nanoparticles into its structure, which allowed controllable oil–water separation.

SUBMITTER: Yin K

PROVIDER: S-EPMC7330909 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile synthesis of flexible macroporous polypropylene sponges for separation of oil and water.

Project description:Oil spill disasters always occur accidentally, accompanied by the release of plenty of crude oil that could spread quickly over a wide area, creating enormous damage to the fragile marine ecological system. Therefore, the facile large-scale synthesis of hydrophobic three-dimensional (3-D) porous sorbents from low cost raw materials is in urgent demand. In this study, we report the facile template-free synthesis of polypropylene (PP) sponge by using a thermally-induced phase separation (TIPS) technique. The obtained sponge showed macroporous structure, excellent mechanical property, high hydrophobicity, and superoleophilicity. Oil could be separated from an oil/water mixture by simple immersing the sponge into the mixture and subsequent squeezing the sponge. All of these features make this sponge the most promising oil sorbent that will replace commercial non-woven PP fabrics.

| S-EPMC4754692 | biostudies-literature

Carbon Nanotubes and Polydopamine Modified Poly(dimethylsiloxane) Sponges for Efficient Oil-Water Separation.

Project description:In this paper, effective separation of oil from both immiscible oil-water mixtures and oil-in-water (O/W) emulsions are achieved by using poly(dimethylsiloxane)-based (PDMS-based) composite sponges. A modified hard template method using citric acid monohydrate as the hard template and dissolving it in ethanol is proposed to prepare PDMS sponge composited with carbon nanotubes (CNTs) both in the matrix and the surface. The introduction of CNTs endows the composite sponge with enhanced comprehensive properties including hydrophobicity, absorption capacity, and mechanical strength than the pure PDMS. We demonstrate the successful application of CNT-PDMS composite in efficient removal of oil from immiscible oil-water mixtures within not only a bath absorption, but also continuous separation for both static and turbulent flow conditions. This notable characteristic of the CNT-PDMS sponge enables it as a potential candidate for large-scale industrial oil-water separation. Furthermore, a polydopamine (PDA) modified CNT-PDMS is developed here, which firstly realizes the separation of O/W emulsion without continuous squeezing of the sponge. The combined superhydrophilic and superoleophilic property of PDA/CNT-PDMS is assumed to be critical in the spontaneously demulsification process.

| S-EPMC8125137 | biostudies-literature

Preparation of PSF/FEP mixed matrix membrane with super hydrophobic surface for efficient water-in-oil emulsion separation.

Project description:Polysulfone (PSF)/fluorinated ethylene propylene (FEP) mixed matrix membranes (MMMs) with super hydrophobic surface were successfully fabricated via non-solvent induced phase separation (NIPS) method. The effects of FEP content on the morphology, roughness, wettability, pore size, and mechanical property of PSF/FEP MMMs were characterized by scanning electron microscope, confocal microscopy, contact angle goniometer, mercury porosimetry, and tensile testing instrument, respectively. When the FEP content was 9 wt%, the average roughness of M-4 reached 0.712 μm. Meanwhile, the water contact angle (CA) and the water sliding angle (SA) was 153.3° and 6.1°, respectively. M-4 showed super hydrophobicity with a micro- and nanoscale structure surface. Then, M-4 was used for separating of water-in-oil emulsion, showing high separation efficiency for water-in-kerosene and water-in-diesel emulsions of 99.79% and 99.47%, respectively. The flux and separation efficiency changed slightly after 10 cycles. Therefore, this study indicated that the obtained PSF/FEP MMM with super hydrophobic surface could be used for efficient water-in-oil emulsion separation.

| S-EPMC9078720 | biostudies-literature

One-Step Solution-Immersion Process of Hydrophobic Octyl Graphene Oxide-Modified Nickel Foam for Highly Efficient Oil-Water Separation.

Project description:Hydrophobic foam was prepared by immersing nickel foam in a dispersion of octyl group-grafted graphene oxide (GO) and used to clean up oil-water mixtures. Octyl graphene oxide (C8-GO) was synthesized using GO and triethoxyoctylsilane by a solvothermal method. The resulting coverage of the foam was characterized, and the surface morphology of the foam was also investigated. The static water contact angle (SWCA) was measured to evaluate the change in wettability of the developed foam. The pristine smooth microstructure of the nickel foam became rough after being covered with the C8-GO nanosheets. The SWCA of C8-GO nickel foam (C8-GO NF) surface was approximately 147°. The C8-GO NF can float on the surface of the water in contrast to the easy-sinking unmodified foam, demonstrating good hydrophobicity. Furthermore, the C8-GO NF showed outstanding performance in organic compound adsorption and excellent efficiency in oil-water separation. The reusability and durability of the obtained foam are evaluated to highlight its usability in more complicated scenarios. The use of C8-GO NF was proved to be a promising strategy for oil-water separation under harsh circumstance.

| S-EPMC6964511 | biostudies-literature

Protonated Melamine Sponge for Effective Oil/Water Separation.

Project description:In this study, we fabricated a superhydrophilic and underwater superoleophobic protonated melamine sponge for effective separation of water-rich immiscible oil/water mixtures with extremely high separation efficiency. This protonated melamine sponge exhibited excellent antifouling properties and could be used to separate oil/water mixtures continuously for up to 12 h without any increase in the oil content in filtrate. Moreover, our compressed protonated melamine sponge could separate both surfactant-free and -stabilized oil-in-water emulsions with high separation efficiencies. The high performance of this protonated melamine sponge and its efficient, energy- and cost-effective preparation suggest that it has great potential for use in practical applications.

| S-EPMC4585846 | biostudies-other

Squeezing Oil into Water under Pressure: Inverting the Hydrophobic Effect.

Project description:The molecular structure of dense homogeneous fluid water-methane mixtures has been determined for the first time using high-pressure neutron-scattering techniques at 1.7 and 2.2 GPa. A mixed state with a fully H-bonded water network is revealed. The hydration shell of the methane molecules is, however, revealed to be pressure-dependent with an increase in the water coordination between 1.7 and 2.2 GPa. In parallel, ab initio molecular dynamics simulations have been performed to provide insight into the microscopic mechanisms associated with the phenomenon of mixing. These calculations reproduce the observed phase change from phase separation to mixing with increasing pressure. The calculations also reproduce the experimentally observed structural properties. Unexpectedly, the simulations show mixing is accompanied by a subtle enhancement of the polarization of methane. Our results highlight the key role played by fine electronic effects on miscibility and the need to readjust our fundamental understanding of hydrophobicity to account for these.

| S-EPMC7467747 | biostudies-literature

Dynamic graphene filters for selective gas-water-oil separation.

Project description:Selective filtration of gas, water, and liquid or gaseous oil is essential to prevent possible environmental pollution and machine/facility malfunction in oil-based industries. Novel materials and structures able to selectively and efficiently filter liquid and vapor in various types of solutions are therefore in continuous demand. Here, we investigate selective gas-water-oil filtration using three-dimensional graphene structures. The proposed approach is based on the adjustable wettability of three-dimensional graphene foams. Three such structures are developed in this study; the first allows gas, oil, and water to pass, the second blocks water only, and the third is exclusively permeable to gas. In addition, the ability of three-dimensional graphene structures with a self-assembled monolayer to selectively filter oil is demonstrated. This methodology has numerous potential practical applications as gas, water, and/or oil filtration is an essential component of many industries.

| S-EPMC4585788 | biostudies-literature

Intelligent Coatings with Controlled Wettability for Oil–Water Separation

Project description:Intelligent surfaces with controlled wettability have caught much attention in industrial oily wastewater treatment. In this study, a hygro-responsive superhydrophilic/underwater superoleophobic coating was fabricated by the liquid-phase deposition of SiO2 grafted with perfluorooctanoic acid. The wettability of the surface could realize the transformation from superhydrophilicity/underwater superoleophobicity (SHI/USOB) to superhydrophobicity/superoleophilicity (SHB/SOI), both of which exhibited excellent separation performance towards different types of oil–water mixtures with the separation efficiency higher than 99%. Furthermore, the long-chain perfluoroakyl substances on the surface could be decomposed by mixing SiO2 with TiO2 nanoparticles under UV irradiation, which could reduce the pollution to human beings and environment. It is anticipated that the prepared coating with controlled wettability could provide a feasible solution for oil–water separation.

| S-EPMC9500904 | biostudies-literature

Superhydrophobic Methylated Silica Sol for Effective Oil-Water Separation.

Project description:Superhydrophobic methylated silica with a core-shell structure was successfully fabricated by a sol-gel process. First, a pristine silica gel with an average particle size of ca. 110 nm was prepared, using tetraethylorthosilicate (TEOS) as a precursor, ethanol as a solvent, and NH4OH as a catalyst. Then, the superhydrophobic methylated silica sol was prepared by introducing methyltrimethoxysilane (MTMS), to graft the surface of the pristine silica gel with methyl groups. The structure and morphology of the methylated silica sol were characterized by Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FE-SEM), and transmission electron microscope (TEM). The characterization results showed that methyl groups were successfully grafted onto the surface of the pristine silica, and the diameter of the methylated silica was increased by 5-10 nm. Various superhydrophobic surfaces on glass, polyethylene terephthalate (PET) fabric, cotton, open-cell polyurethane (PU) foam, and polypropylene (PP) filter cloth were successfully constructed by coating the above substrates with the methylated silica sol and reached with a maximum static water contact angle and slide angle of 161° and 3°, respectively. In particular, the superhydrophobic PP filter cloth exhibited promising application in oil-water separation. The separation efficiency of different oil-water mixtures was higher than 96% and could be repeated at least 15 times.

| S-EPMC7078611 | biostudies-literature

Full-color tunable photoluminescent carbon dots based on oil/water interfacial synthesis and their applications.

Project description:Herein, we developed a facile method to produce high yield, full-color tunable photoluminescent (PL) carbon dots (CDs) at the oil/water interface. This unique synthesis method for CDs involved the use of the oil-soluble small molecule styrene as both the reactant and oil phase medium at low temperature (60 °C) through a catalytic-oxidation reaction in an aqueous system, which resulted in a high product yield (about 50 wt%). Interestingly, the hydroxy-rich CDs at the oil/water interface self-assembled into nanospheres (N-CDs) spontaneously via hydrogen-bond interactions in the presence of styrene droplets. Without any surface passivation, the N-CDs exhibited self-quenching-resistant and full-color tunable PL properties, which are highly desirable in the optoelectronic field. The mechanism of the formation of N-CDs and their emission is proposed for the first time, which provides insight into the possible chemical processes occurring during the preparation. These distinctive CDs have potential novel applications in PL coatings, smart wearable optoelectronic devices, light emitting diodes, full-color displays, and solar cells.

| S-EPMC9081703 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data