Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Influence of Pore Structure and Acidity on the Hydrodesulfurization of Dibenzothiophene over NiMo-Supported Catalysts.

ABSTRACT: A series of mesoporous materials of SBA-16 were in situ incorporated into ZSM-5 crystallites via a two-step self-assemble method, and hydrodesulfurization (HDS) catalysts were prepared on the corresponding ZSM-5/SBA-16 (ZS) composites. The characterization results indicated that ZSM-5 nanoseeds were fabricated into the silica framework of the ZS composites, and the three-dimensional Im3m cubic structure of SBA-16 was retained simultaneously. In addition, the ZS series materials possessed open pores and large surfaces, which would facilitate the diffusion of reactants in the mesoporous channels. Moreover, the introduction of ZSM-5 seeds into composites could enhance the acidities of supports. As a result, the NiMo/ZS series catalysts exhibited high activities for DBT HDS processes. The NiMo/ZS-160 catalyst exhibited the highest catalytic efficiency (96.5%), which was apparently attributed to the synergistic contributions of the physicochemical properties of ZS supports and the dispersion states of active metals. Correspondingly, DBT HDS reactions over the NiMo/ZS series catalysts mainly proceeded via a hydrogenation desulfurization route that benefitted from the enhanced acidities especially the total Brønsted acid.

SUBMITTER: Shi Y

PROVIDER: S-EPMC7331072 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Molecular Characteristics of Light Cycle Oil Hydrodesulfurization over Silica-Alumina-Supported NiMo Catalysts.

Project description:A detailed understanding of the catalytic upgrading of light cycle oil (LCO) is important to achieve effective deep hydrodesulfurization (HDS) when LCO is mixed with straight run gas oil in the diesel pool. Herein, HDS of polyaromatic-rich LCO was studied at the molecular level over three NiMo catalysts on silica-alumina supports, which were synthesized on the pilot scale using different silica/alumina mixing procedures. Gas chromatography with atomic emission detection and two-dimensional gas chromatography with time-of-flight mass spectrometry were used to evaluate the HDS performance through determining the feed and product compositions, respectively, at the molecular level. Furthermore, the textural properties of the catalysts were evaluated using Raman spectroscopy, transmission electron microscopy, and the temperature-programmed desorption of NH3. The performance of the best catalyst was attributed to its higher content of octahedrally coordinated Mo oxide species, a lower number of layered stacks, and the more acidic sites on the surface. In addition, the hydrotreating reactivity of various family groups in LCO over the catalyst was investigated.

| S-EPMC7689679 | biostudies-literature

Effect of support acidity during selective hydrogenolysis of glycerol over supported palladium-ruthenium catalysts.

Project description:We report the role of the acidity of support during the selectivity hydrogenolysis of glycerol over supported bimetallic palladium-ruthenium (PdRu) catalysts. The PdRu nanoparticles were supported on a series of metal oxides and zeolitic supports via the modified impregnation method and tested for the liquid-phase hydrogenolysis of glycerol using gaseous hydrogen. The relative acid site densities of selected catalysts were determined by ammonia temperature-programmed desorption and pyridine desorption experiments. Based on these studies, we report a direct correlation between the catalytic activity (conversion and 1,2 propane diol yield) and two different acid sites (strong acid sites and very strong acid sites). Besides zeolite-supported catalysts, TiO2 supported PdRu nanoparticles exhibit moderate catalytic activity; however, this catalyst shows high selectivity for the desired C-O bond cleavage to produce C3 products over the undesired C-C bond cleavage to produce < C3 products. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

| S-EPMC7422897 | biostudies-literature

Sustainable aviation fuel from hydroconversion of safflower oil over NiMo/Al2O3 and Pt-ZrO2/Al2O3 catalysts

Project description:This article presents the experiments on the hydroconversion of mixtures of safflower oil (SO) mixed with straight run gas oil (SRGO) in a different ratio as an alternative to obtain biojet. The research was conducted in two stages; the first stage a mixture of SO/SRGO was subjected hydrotreating at 350 °C, 380 °C, 80 bar, LHSV 1 h−1 and 1.5 h−1, over the sulfided NiMo/Al2O3 catalyst, while in the second stage a mixture of SO/SRGO which was already hydrotreated was subjected to a hydroisomerization at 280 °C, LHSV 1 h−1, P = 30 bar, over the sulfided Pt-ZrO2/Al2O3 catalyst. It was studied the influence of SO/SRGO ratio and hydroconversion conditions on the biojet quality produced, compared with characteristics required by standard ASTM D1655. The best condition for obtaining the biojet were 380 °C, 80 bar, LHSV 1 h−1 for hydrotreating followed by hydroisomerization of 20% SO in the mixture at 280 °C, LHSV 1 h−1, P = 30 bar. Supplementary Information The online version contains supplementary material available at 10.1007/s11144-022-02197-8.

| S-EPMC8929454 | biostudies-literature

Alternative Preparation of Improved NiMo-Alumina Deoxygenation Catalysts.

Project description:This investigation deals with NiMo-alumina hydrotreating catalysts effective in the deoxygenation of rapeseed oil. The main goal was to compare catalyst structure and their deoxygenation performance and to link these parameters to reveal important structural information regarding the catalyst's intended use. Catalysts were prepared from different precursors (nickel acetate tetrahydrate/molybdenyl acetylacetonate in ethanol and water vs. nickel nitrate hexahydrate/ammonium heptamolybdate tetrahydrate in water), which resulted in their contrasting structural arrangement. These changes were characterized by elemental composition determination, UV-Vis diffuse reflectance spectroscopy, temperature programmed reduction by hydrogen, nitrogen physisorption at 77 K, scanning and transmission electron microscopies, and deoxygenation of rapeseed oil. The critical aspect of high oxygen elimination was a homogeneous dispersion of NiO and MoO3 phases on the support. It subsequently led to the effective transformation of the oxide form of a catalyst to its active sulfide form well-dispersed on the support. On the other hand, the formation of bulk MoO3 resulted in the separate bulk phase and lower extent of sulfidation.

| S-EPMC7157445 | biostudies-literature

Enhancing hydrogenation activity of Ni-Mo sulfide hydrodesulfurization catalysts.

Project description:Unsupported Ni-Mo sulfides have been hydrothermally synthesized and purified by HCl leaching to remove Ni sulfides. Unblocking of active sites by leaching significantly increases the catalytic activity for dibenzothiophene hydrodesulfurization. The site-specific rates of both direct (hydrogenolytic) and hydrogenative desulfurization routes on these active sites that consist of coordinatively unsaturated Ni and sulfhydryl groups were identical for all unsupported sulfides. The hydrogenative desulfurization rates were more than an order of magnitude higher on unsupported Ni-Mo sulfides than on Al2O3-supported catalysts, while they were similar for the direct (hydrogenolytic) desulfurization. The higher activity is concluded to be caused by the lower average electronegativity, i.e., higher base strength and polarity, of Ni-Mo sulfides in the absence of the alumina support and the modified adsorption of reactants enabled by multilayer stacking. Beyond the specific catalytic reaction, the synthesis strategy points to promising scalable routes to sulfide materials broadly applied in hydrogenation and hydrotreating.

| S-EPMC7209994 | biostudies-literature

Hydrodeoxygenation of Isoeugenol over Alumina-Supported Ir, Pt, and Re Catalysts.

Project description:Hydrodeoxygenation (HDO) of isoeugenol (IE) was investigated using bimetallic iridium-rhenium and platinum-rhenium catalysts supported on alumina in the temperature and pressure ranges of 200-250 °C and 17-40 bar in nonpolar dodecane as a solvent. The main parameters were catalyst type, hydrogen pressure, and initial concentration. Nearly quantitative yield of the desired product, propylcyclohexane (PCH), at complete conversion in 240 min was obtained with Ir-Re/Al2O3 prepared by the deposition-precipitation method using 0.1 mol/L IE initial concentration. High iridium dispersion together with a modification effect of rhenium provided in situ formation of the IrRe active component with reproducible catalytic activity for selective HDO of IE to PCH. The reaction rate was shown to increase with the increasing initial IE concentration promoting also HDO and giving a higher liquid phase mass balance. Increasing hydrogen pressure benefits the PCH yield.

| S-EPMC6292701 | biostudies-literature

Hydrogenolysis of Furfuryl Alcohol to 1,2-Pentanediol Over Supported Ruthenium Catalysts.

Project description:Hydrogenolysis of the furan rings of furfural and furfuryl alcohol, which can be obtained from biomass, has attracted attention as a method for obtaining valuable chemicals such as 1,2-pentanediol. In this study, we examined the hydrogenolysis of furfuryl alcohol to 1,2-pentanediol over Pd/C, Pt/C, Rh/C, and various supported Ru catalysts in several solvents. In particular, we investigated the effects of combinations of solvents and supports on the reaction outcome. Of all the tested combinations, Ru/MgO in water gave the best selectivity for 1,2-pentanediol: with this catalyst, 42 % selectivity for 1,2-pentanediol was achieved upon hydrogenolysis of furfuryl alcohol for 1 h at 463 K. In contrast, reaction in water in the presence of Ru/Al2 O3 afforded cyclopentanone and cyclopentanol by means of hydrogenation and rearrangement reactions.

| S-EPMC8340061 | biostudies-literature

Influence of Metal Deposition and Activation Method on the Structure and Performance of Carbon Nanotube Supported Palladium Catalysts.

Project description:The effects of the metal deposition and activation methods on metal particle size and distribution were investigated for carbon nanotube supported Pd catalysts. The Pd precursor was loaded by incipient wetness impregnation, ion adsorption, and deposition precipitation and was activated by thermal treatment under a nitrogen atmosphere or in the liquid phase by reduction by formaldehyde or sodium borohydride. Regardless of the metal precursor loading method, activation under a N2 atmosphere at 500?°C led to homogeneously distributed 4?nm Pd particles. Liquid-phase reduction by sodium borohydride provided a bimodal distribution with particle sizes of approximately 1 and >10?nm. A somewhat weaker reducing agent, formaldehyde, yielded particles approximately 1?nm in size. The activities of the catalysts for the hydrogenation of cinnamaldehyde correlated with the particle sizes.

| S-EPMC5947541 | biostudies-literature

Dehydrogenation of Cycloalkanes over N-Doped Carbon-Supported Catalysts: The Effects of Active Component and Molecular Structure of the Substrate.

Project description:Efficient dehydrogenation of cycloalkanes under mild conditions is the key to large-scale application of cycloalkanes as a hydrogen storage medium. In this paper, a series of active metals loaded on nitrogen-doped carbon (M/CN, M = Pt, Pd, Ir, Rh, Au, Ru, Ag, Ni, Cu) were prepared to learn the role of active metals in cycloalkane dehydrogenation with cyclohexane as the model reactant. Only Pt/CN, Pd/CN, Rh/CN and Ir/CN can catalyze the dehydrogenation of cyclohexane under the set conditions. Among them, Pt/CN exhibited the best catalytic activity with the TOF value of 269.32 h-1 at 180 °C, followed by Pd/CN, Rh/CN and Ir/CN successively. More importantly, the difference of catalytic activity between these active metals diminishes with the increase in temperature. This implies that there is a thermodynamic effect of cyclohexane dehydrogenation with the synthetic catalysts, which was evidenced by the study on the activation energy. In addition, the effects of molecular structure on cycloalkane dehydrogenation catalyzed by Pt/CN were studied. The results reveal that cycloalkane dehydrogenation activity and hydrogen production rate can be enhanced by optimizing the type, quantity and position of alkyl substituents on cyclohexane.

| S-EPMC8617684 | biostudies-literature

Liquid Phase Hydrogenation of Pharmaceutical Interest Nitroarenes over Gold-Supported Alumina Nanowires Catalysts.

Project description:In this work, Au nanoparticles, supported in Al2O3 nanowires (ANW) modified with (3-aminopropyl)trimethoxysilane were synthetized, for their use as catalysts in the hydrogenation reaction of 4-(2-fluoro-4-nitrophenyl)-morpholine and 4-(4-nitrophenyl)morpholin-3-one. ANW was obtained by hydrothermal techniques and the metal was incorporated by the reduction of the precursor with NaBH4 posterior to superficial modification. The catalysts were prepared at different metal loadings and were characterized by different techniques. The characterization revealed structured materials in the form of nanowires and a successful superficial modification. All catalysts show that Au is in a reduced state and the shape of the nanoparticles is spherical, with high metal dispersion and size distributions from 3.7 to 4.6 nm. The different systems supported in modified-ANW were active and selective in the hydrogenation reaction of both substrates, finding for all catalytic systems a selectivity of almost 100% to the aromatic amine. Catalytic data showed pseudo first-order kinetics with respect to the substrate for all experimental conditions used in this work. The solvent plays an important role in the activity and selectivity of the catalyst, where the highest efficiency and operational stability was achieved when ethanol was used as the solvent.

| S-EPMC7078662 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data