Browse
Submit Data
Databases
API
Help

Dataset Information

36 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Solution Processing and Self-Organization of PbS Quantum Dots Passivated with Formamidinium Lead Iodide (FAPbI3).

ABSTRACT: Solution-processed lead sulfide quantum dots (PbS QDs) are very attractive as NIR-active semiconductors for the fabrication of cost-efficient optoelectronic devices. To control the thin film carrier transport, as well as stability, surface passivation is of crucial importance. Here, we present the successful surface passivation of PbS QDs by the formamidinium lead iodide (FAPbI3) ligand. An effective procedure for the fabrication of FAPbI3-passivated PbS QDs through a binary-phase ligand exchange protocol in hexane and n-methylformamide is demonstrated. It is shown that this solution-processed ligand exchange drastically changes the photoluminescence intensity, exciton recombination dynamics, and carrier lifetime of the nanocrystals. The solution casting of the ligand-exchanged nanocrystals into thin films results in the periodic ordering of QDs in a square superlattice with close contacts. Planar graphene/QD photodetectors fabricated with PbS QDs passivated with FAPbI3 show substantially increased thermal stability as compared to similar devices using PbS QDs passivated with commonly used methylammonium lead iodide.

SUBMITTER: Aynehband S

PROVIDER: S-EPMC7331203 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Optical Properties, Morphology, and Stability of Iodide-Passivated Lead Sulfide Quantum Dots.

Project description:Iodide atomic surface passivation of lead chalcogenides has spawned a race in efficiency of quantum dot (QD)-based optoelectronic devices. Further development of QD applications requires a deeper understanding of the passivation mechanisms. In the first part of the current study, we compare optics and electrophysical properties of lead sulfide (PbS) QDs with iodine ligands, obtained from different iodine sources. Methylammonium iodide (MAI), lead iodide (PbI2), and tetrabutylammonium iodide (TBAI) were used as iodine precursors. Using ultraviolet photoelectron spectroscopy, we show that different iodide sources change the QD HOMO/LUMO levels, allowing their fine tuning. AFM measurements suggest that colloidally-passivated QDs result in formation of more uniform thin films in one-step deposition. The second part of this paper is devoted to the PbS QDs with colloidally-exchanged shells (i.e., made from MAI and PbI2). We especially focus on QD optical properties and their stability during storage in ambient conditions. Colloidal lead iodide treatment is found to reduce the QD film resistivity and improve photoluminescence quantum yield (PLQY). At the same time stability of such QDs is reduced. MAI-treated QDs are found to be more stable in the ambient conditions but tend to agglomerate, which leads to undesirable changes in their optics.

| S-EPMC6803903 | biostudies-literature

On the Colloidal Stability of PbS Quantum Dots Capped with Methylammonium Lead Iodide Ligands.

Project description:Phase-transfer exchange of pristine organic ligands for inorganic ones is essential for the integration of colloidal quantum dots (CQDs) in optoelectronic devices. This method results in a colloidal dispersion (ink) which can be directly deposited by various solution-processable techniques to fabricate conductive films. For PbS CQDs capped with methylammonium lead iodide ligands (MAPbI3), the most commonly employed solvent is butylamine, which enables only a short-term (hours) colloidal stability and thus brings concerns on the possibility of manufacturing CQD devices on a large scale in a reproducible manner. In this work, we studied the stability of alternative inks in two highly polar solvents which impart long-term colloidal stability of CQDs: propylene carbonate (PC) and 2,6-difluoropyridine (DFP). The aging and the loss of the ink's stability were monitored with optical, structural, and transport measurements. With these solvents, PbS CQDs capped with MAPbI3 ligands retain colloidal stability for more than 20 months, both in dilute and concentrated dispersions. After 17 months of ink storage, transistors with a maximum linear mobility for electrons of 8.5 × 10-3 cm2/V s are fabricated; this value is 17% of the one obtained with fresh solutions. Our results show that both PC- and DFP-based PbS CQD inks offer the needed shelf life to allow for the development of a CQD device technology.

| S-EPMC7705889 | biostudies-literature

Photoexcitation dynamics in solution-processed formamidinium lead iodide perovskite thin films for solar cell applications.

Project description:Formamidinium lead iodide (FAPbI3) is a newly developed hybrid perovskite that potentially can be used in high-efficiency solution-processed solar cells. Here, the temperature-dependent dynamic optical properties of three types of FAPbI3 perovskite films (fabricated using three different precursor systems) are comparatively studied. The time-resolved photoluminescence (PL) spectra reveal that FAPbI3 films made from the new precursor (a mixture of formamidinium iodide and hydrogen lead triiodide) exhibit the longest lifetime of 439 ns at room temperature, suggesting a lower number of defects and lower non-radiative recombination losses compared with FAPbI3 obtained from the other two precursors. From the temperature-dependent PL spectra, a phase transition in the films is clearly observed. Meanwhile, exciton-binding energies of 8.1 and 18 meV for the high- and low-temperature phases are extracted, respectively. Importantly, the PL spectra for all of the samples show a single peak at room temperature, whereas at liquid-helium temperature the emission features two peaks: one in higher energy displaying a fast decay (0.5 ns) and a second red-shifted peak with a decay of up to several microseconds. These two emissions, separated by ~18 meV, are attributed to free excitons and bound excitons with singlet and triplet characters, respectively.

| S-EPMC6059954 | biostudies-literature

Iodide capped PbS/CdS core-shell quantum dots for efficient long-wavelength near-infrared light-emitting diodes.

Project description:PbS based quantum dots (QDs) have been studied in great detail for potential applications in electroluminescent devices operating at wavelengths important for telecommunications (1.3-1.6 μm). Despite the recent advances in field of quantum dot light-emitting diode (QLED), further improvements in near-infrared (NIR) emitting device performance are still necessary for the widespread use and commercialization of NIR emitting QLED technology. Here, we report a high-performance 1.51-μm emitting QLED with inverted organic-inorganic hybrid device architecture and PbS/CdS core-shell structured quantum dots as emitter. The resultant QLEDs show a record device performance for the QLEDs in 1.5 μm emission window, with a maximum radiance of 6.04 Wsr-1 m-2 and peak external quantum efficiency (EQE) of 4.12%, respectively.

| S-EPMC5677035 | biostudies-literature

Temperature Dependent Charge Carrier Dynamics in Formamidinium Lead Iodide Perovskite.

Project description:The fundamental opto-electronic properties of organic-inorganic hybrid perovskites are strongly affected by their structural parameters. These parameters are particularly critical in formamidinium lead iodide (FAPbI3), in which its large structural disorder leads to a non-perovskite yellow phase that hinders its photovoltaic performance. A clear understanding of how the structural parameters affect the opto-electronic properties is currently lacking. We have studied the opto-electronic properties of FAPbI3 using microwave conductivity measurements. We find that the mobility of FAPbI3 increases at low temperature following a phonon scattering behavior. Unlike methylammonium lead iodide (MAPbI3), there are no abrupt changes after the low-temperature β/γ phase transition and the lifetime is remarkably long. This absence of abrupt changes can be understood in terms of the reduced rotational freedom and smaller dipole moment of the formamidinium, as compared to methylammonium.

| S-EPMC5661241 | biostudies-literature

Thermodynamic and Kinetic Aspects of Formamidinium Lead Iodide Thermal Decomposition.

Project description:We report the results of a multi-technique study on the thermodynamics and kinetics of formamidinium lead iodide (FAPI) thermal decomposition. Thermodynamics was investigated by means of Knudsen effusion techniques. Kinetics was studied either by temperature-controlled powder X-ray diffraction or by two isoconversional treatments of differential scanning calorimetry data. FAPI appears to be much more thermally stable compared to methylammonium lead iodide, as predictable from the lower acidity of the formamidinium cation compared to methylammonium. The chemical processes responsible for its thermal degradation appear to be quite complex as highlighted by the composition of the gaseous phase evolved during the process. The apparent activation energy values of the decomposition obtained from X-ray diffraction (XRD) (112 ± 9 kJ/mol) and differential scanning calorimetry (DSC) measurements (205 ± 20 and 410 ± 20 kJ/mol, respectively, for the first and second decomposition steps identified by the deconvolution procedure) reflect the different steps of the process observed by the two techniques. The thermodynamic properties of the more important decomposition channels and the enthalpy of formation of FAPI were estimated by combining the results of Knudsen effusion measurements.

| S-EPMC8521522 | biostudies-literature

Ligand exchange engineering of FAPbI3 perovskite quantum dots for solar cells

Project description:Formamidinium lead triiodide (FAPbI3) perovskite quantum dots (PQDs) show great advantages in photovoltaic applications due to their ideal bandgap energy, high stability and solution processability. The anti-solvent used for the post-treatment of FAPbI3 PQD solid films significantly affects the surface chemistry of the PQDs, and thus the vacancies caused by surface ligand removal inhibit the optoelectronic properties and stability of PQDs. Here, we study the effects of different anti-solvents with different polarities on FAPbI3 PQDs and select a series of organic molecules for surface passivation of PQDs. The results show that methyl acetate could effectively remove surface ligands from the PQD surface without destroying its crystal structure during the post-treatment. The benzamidine hydrochloride (PhFACl) applied as short ligands of PQDs during the post-treatment could fill the A-site and X-site vacancies of PQDs and thus improve the electronic coupling of PQDs. Finally, the PhFACl-based PQD solar cell (PQDSC) achieves a power conversion efficiency of 6.4%, compared to that of 4.63% for the conventional PQDSC. This work provides a reference for insights into the surface passivation of PQDs and the improvement in device performance of PQDSCs. Graphical abstract Supplementary Information The online version contains supplementary material available at 10.1007/s12200-022-00038-z.

| S-EPMC9756204 | biostudies-literature

Dismantling the "Red Wall" of Colloidal Perovskites: Highly Luminescent Formamidinium and Formamidinium-Cesium Lead Iodide Nanocrystals.

Project description:Colloidal nanocrystals (NCs) of APbX3-type lead halide perovskites [A = Cs+, CH3NH3+ (methylammonium or MA+) or CH(NH2)2+ (formamidinium or FA+); X = Cl-, Br-, I-] have recently emerged as highly versatile photonic sources for applications ranging from simple photoluminescence down-conversion (e.g., for display backlighting) to light-emitting diodes. From the perspective of spectral coverage, a formidable challenge facing the use of these materials is how to obtain stable emissions in the red and infrared spectral regions covered by the iodide-based compositions. So far, red-emissive CsPbI3 NCs have been shown to suffer from a delayed phase transformation into a nonluminescent, wide-band-gap 1D polymorph, and MAPbI3 exhibits very limited chemical durability. In this work, we report a facile colloidal synthesis method for obtaining FAPbI3 and FA-doped CsPbI3 NCs that are uniform in size (10-15 nm) and nearly cubic in shape and exhibit drastically higher robustness than their MA- or Cs-only cousins with similar sizes and morphologies. Detailed structural analysis indicated that the FAPbI3 NCs had a cubic crystal structure, while the FA0.1Cs0.9PbI3 NCs had a 3D orthorhombic structure that was isostructural to the structure of CsPbBr3 NCs. Bright photoluminescence (PL) with high quantum yield (QY > 70%) spanning red (690 nm, FA0.1Cs0.9PbI3 NCs) and near-infrared (near-IR, ca. 780 nm, FAPbI3 NCs) regions was sustained for several months or more in both the colloidal state and in films. The peak PL wavelengths can be fine-tuned by using postsynthetic cation- and anion-exchange reactions. Amplified spontaneous emissions with low thresholds of 28 and 7.5 ?J cm-2 were obtained from the films deposited from FA0.1Cs0.9PbI3 and FAPbI3 NCs, respectively. Furthermore, light-emitting diodes with a high external quantum efficiency of 2.3% were obtained by using FAPbI3 NCs.

| S-EPMC5800405 | biostudies-literature

Direct Laser Writing of ?- to ?-Phase Transformation in Formamidinium Lead Iodide.

Project description:Organolead halide perovskites are increasingly considered for applications well beyond photovoltaics, for example, as the active regions within photonic devices. Herein, we report the direct laser writing (DLW: 458 nm cw-laser) of the formamidinium lead iodide (FAPbI3) yellow ?-phase into its high-temperature luminescent black ?-phase, a remarkably easy and scalable approach that takes advantage of the material's susceptibility to transition under ambient conditions. Through the DLW of ?-FAPbI3 tracks on ?-FAPbI3 single-crystal surfaces, the controlled and rapid microfabrication of highly luminescent structures exhibiting long-term phase stability is detailed, offering an avenue toward the prototyping of complex perovskite-based optical devices. The dynamics and kinetics of laser-induced ?- to ?-phase transformations are investigated in situ by Raman microprobe analysis, as a function of irradiation power, time, temperature, and atmospheric conditions, revealing an interesting connection between oxygen intercalation at the surface and the ?- to ?-phase transformation dynamics, an insight that will find application within the wider context of FAPbI3 thermal phase relations.

| S-EPMC5595358 | biostudies-literature

Solution-processed intermediate-band solar cells with lead sulfide quantum dots and lead halide perovskites.

Project description:The intermediate-band solar cell (IBSC) with quantum dots and a bulk semiconductor matrix has potential for high power conversion efficiency, exceeding the Shockley-Queisser limit. However, the IBSCs reported to date have been fabricated only by dry process and their efficiencies are limited, because their photo-absorption layers have low particle density of quantum dots, defects due to lattice strain, and low bandgap energy of bulk semiconductors. Here we present solution-processed IBSCs containing photo-absorption layers where lead sulfide quantum dots are densely dispersed in methylammonium lead bromide perovskite matrices with a high bandgap energy of 2.3?eV under undistorted conditions. We confirm that the present IBSCs exhibit two-step photon absorption via intermediate-band at room temperature by inter-subband photocurrent spectroscopy.

| S-EPMC6327045 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data