Dataset Information

Modified Starch as a Filter Controller in Water-Based Drilling Fluids.

ABSTRACT: Herein, the effectiveness of an itaconic acid (IA) graft copolymer on native corn starch (NCS) as a filter control agent in fresh water-based drilling fluids (WBDFs) was evaluated. The copolymer (S-g-IA_APS) was synthesized by conventional radical dispersion polymerization using the redox initiation system (NH4)2S2O8/NaHSO3. The modification of the starches was verified by volumetry, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Then, three WBDFs were formulated in which only the added polymer (NCS, S-g-IA_APS, and a commercial starch (CPS)) was varied to control the fluid losses. The physico-chemical, rheological, and filtering properties of the formulated systems were evaluated in terms of density (ρ), pH, plastic viscosity (µp), apparent viscosity (µa), yield point (Yp), gel strength (Rg), and filtrated volume (VAPI). In order to evaluate the resistance to temperature and contaminants of the WBDFs, they were subjected to high pressure and high temperature filtering (VHPHT). The filter control agents were also subjected to aging and contamination with cement and salt. The S-g-IA_APS addition improved the filtering behavior at a high pressure and temperature by 38%.

SUBMITTER: Soto D

PROVIDER: S-EPMC7345978 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Modified Starch as a Filter Controller in Water-Based Drilling Fluids.

Soto Diana D León Orietta O Urdaneta José J Muñoz-Bonilla Alexandra A Fernández-García Marta M

Materials (Basel, Switzerland) 20200620 12

Herein, the effectiveness of an itaconic acid (IA) graft copolymer on native corn starch (NCS) as a filter control agent in fresh water-based drilling fluids (WBDFs) was evaluated. The copolymer (S-g-IA_APS) was synthesized by conventional radical dispersion polymerization using the redox initiation system (NH4)2S2O8/NaHSO3. The modification of the starches was verified by volumetry, Fourier transform infrared spectroscopy (FTIR), the ...[more]

PMID: 32575779

Similar Datasets

Project description:Petroleum well drilling fluids are one of the most significant constituents in the subterranean drilling processes to meet an increasing global demand for oil and gas. Drilling fluids experience exceptional wellbore conditions, e.g. high temperature and high pressure that adversely affect the rheology of these fluids. Gas and oil well drilling operations have to adjourn due to changes in fluid rheology, since the drilling fluids may lose their effectiveness to suspend heavy particles and to carry drilled cuttings to the surface. The rheological properties of drilling fluids can be controlled by employing viscosifiers that should have exceptional stability in downhole environments. Here, we have developed next-generation viscosifiers-organically modified magnesium silicates (MSils)-for reservoir drilling fluids where organic functionalities are directly linked through the Si-C bond, unlike the industry's traditional viscosifier, organoclay, that has electrostatic linkages. The successful formation of covalently-linked hexadecyl and phenyl functionalized magnesium silicates (MSil-C16 and MSil-Ph) were confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). Identical drilling fluid formulations were designed for comparison using MSils and a commercial viscosifier. The rheological properties of fluids were measured at ambient conditions as well as at high temperatures (up to 150 °C) and high pressure (70 MPa). Owing to strong covalent linkages, drilling fluids that were formulated with MSils showed a 19.3% increase in yield point (YP) and a 31% decrease in apparent viscosity (AV) at 150 °C under 70 MPa pressure, as compared to drilling fluids that were formulated with traditional organoclay. The higher yield point and lower apparent viscosity are known to facilitate and increased drilling rate of penetration of the fluids and an enhanced equivalent circulation density (ECD), the dynamic density condition, for efficient oil and gas wells drilling procedures.

Project description:Effective control of shale swelling and lost circulation using drilling fluid is considered the dominant strategy for maintaining borehole stability, especially drilling operations in deep oil and gas wells. In this work, a hybrid silicate that contains lithium silicate and potassium methyl silicate (PMS) was employed as a film-forming additive to reduce shale hydration and filtration loss in the high-temperature drilling fluid. Scanning electron microscopy (SEM) results revealed that a dense quartz crystal film coating on the shale can be formed in a hybrid silicate solution when the temperature exceeds 150 °C. The in situ-formed film on the shale surface with a thickness of 60-130 μm was composed of fibrous crystalline silica. Furthermore, the aqueous hybrid silicate exhibited enhanced hydration inhibition ability by preventing water invasion of the formation. Aqueous hybrid silicate with a concentration of 0.5-3 wt % lithium silicate and 0.1-0.2 mol/L PMS was first chosen to obtain the optimum concentration according to the hydration inhibition ability and film formation characteristics. The hybrid silicate was added into a drilling fluid formulation applicable in high-pressure and high-temperature conditions, and the rheological characteristics and filtration properties were investigated. The results confirmed that drilling fluids with the addition of hybrid silicate can mitigate variation of viscosity and yield point before and after aging at 180 and 220 °C. Besides, the filtration behavior was also improved by adding hybrid silicate into the drilling fluid. A lower filtration loss was observed at the concentration of 1.0 wt % lithium silicate and 0.2 mol/L potassium methyl silicate, which showed 63 and 50% HPHT fluid loss reduction for unweighted and weighted formulations at 205 °C and 3.5 MPa, respectively. In addition, the drilling fluid featured stable rheological and filtration properties and excellent shale hydration inhibition characteristics when exposed to high temperatures, making it a promising candidate for drilling in deep oil and gas wells.

Dataset Information

Modified Starch as a Filter Controller in Water-Based Drilling Fluids.

Publications

Modified Starch as a Filter Controller in Water-Based Drilling Fluids.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets