Dataset Information

Effect of Composition and Interfacial Tension on the Rheology and Morphology of Heavy Oil-In-Water Emulsions.

ABSTRACT: Rheological and morphological properties of heavy crude oil-in-water (O/W) emulsions have been studied. Two series of emulsions were considered: first, the surfactant type remained constant, while the continuous phase content was varied and second, the surfactant type was varied while the continuous phase content remained constant. Under stress-controlled shearing, all samples exhibit viscoplastic behavior. The rheological properties are directly related to the morphology of the emulsions which vary in size of dispersed phase droplets and their inherent structure. Adding a surfactant characterized by a high value of interfacial oil-water tension results in a decrease in the yield stress (which is a measure of the interparticulate structure strength). The same effect is attained by increasing the water content. Meanwhile, these two factors determine the viscosity which can be much lower than that of the basic heavy crude oil if the O/W type of emulsions has been created. Special attention was paid to the viscoelastic properties which have been scarcely reported. Correlations were found between the surfactant properties, composition of the emulsion, and rheological characteristics of emulsions (yield stress, apparent viscosity, and viscoelastic properties), which allows for reduction in the crude oil viscosity down to a low enough level acceptable for pipe transportation.

SUBMITTER: Arinina MP

PROVIDER: S-EPMC7364585 | biostudies-literature | 2020 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of Composition and Interfacial Tension on the Rheology and Morphology of Heavy Oil-In-Water Emulsions.

Arinina Marianna P MP Zuev Kirill V KV Kulichikhin Valery G VG Malkin Alexander Ya AY

ACS omega 20200701 27

Rheological and morphological properties of heavy crude oil-in-water (O/W) emulsions have been studied. Two series of emulsions were considered: first, the surfactant type remained constant, while the continuous phase content was varied and second, the surfactant type was varied while the continuous phase content remained constant. Under stress-controlled shearing, all samples exhibit viscoplastic behavior. The rheological properties are directly related to the morphology of the emulsions which ...[more]

PMID: 32685810

Similar Datasets

Project description:Understanding the interaction of nanoparticles with proteins and how this interaction modifies the nanoparticles’ surface is crucial before their use for biomedical applications. Since fluorinated materials are emerging as potential imaging probes and delivery vehicles, their interaction with proteins of biological interest must be studied in order to be able to predict their performance in real scenarios. It is known that fluorinated planar surfaces may repel the unspecific adsorption of proteins but little is known regarding the same process on fluorinated nanoparticles due to the scarce examples in the literature. In this context, the aim of this work is to propose a simple and fast methodology to study fluorinated nanoparticle-protein interactions based on interfacial surface tension (IFT) measurements. This technique is particularly interesting for fluorinated nanoparticles due to their increased hydrophobicity. Our study is based on the determination of IFT variations due to the interaction of quantum dots of ca. 5 nm inorganic core/shell diameter coated with fluorinated ligands (QD_F) with several proteins at the oil/water interface. Based on the results, we conclude that the presence of QD_F do not disrupt protein spontaneous film formation at the oil/water interface. Even if at very low concentrations of proteins the film formation in the presence of QD_F shows a slower rate, the final interfacial tension reached is similar to that obtained in the absence of QD_F. The differential behaviour of the studied proteins (bovine serum albumin, fibrinogen and apotransferrin) has been discussed on the basis of the adsorption affinity of each protein towards DCM/water interface and their different sizes. Additionally, it has been clearly demonstrated that the proposed methodology can serve as a complementary technique to other reported direct and indirect methods for the evaluation of nanoparticle-protein interactions at low protein concentrations.

Project description:Liquid-infused membranes have been introduced to membrane technology recently. The infusion liquid can be expelled, opening the pore, in response to an immiscible feed liquid pressure. In the open state, the pore wall is still covered with the infusion liquid forming the so-called liquid-lined pores. Liquid lining is expected to give anti-fouling properties to these membranes. The pressure-responsive pores can be used for efficient sorting of fluids from a mixture based on interfacial tension. For example, in a two-phase mixture of immiscible liquids, the required liquid entry pressure is different for the constituent liquids. Here, we investigate the capability of liquid-infused membranes for selective permeation of the dispersed phase, that is, oil from an oil-in-water (O/W) emulsion. The separation experiments are conducted in a dead-end pressure-controlled filtration cell using liquid-infused and non-infused membranes. In order to permeate the dispersed phase, oil droplets should come in contact with the membrane surface which is accomplished here by gravity-driven creaming. Our results reveal that by setting the feed pressure between the entry pressure of oil and that of the surfactant solution, oil can be successfully permeated. For high concentrations of surfactants, water also permeated partly. The amount of water permeated through liquid-infused membranes is lower than that through non-infused membranes, caused by the corresponding interfacial tensions. The results suggest that the presence of the infusion liquid in the membrane gives rise to the formation of three-phase interfaces in the pore, namely, the interface between surfactant solution-oil (?12) and that between oil-infusion liquid (?23). Based on the interfacial energy contributions, the additional interface between oil and the infusion liquid gives rise to an increase in the liquid entry pressure for the surfactant solution based on the combined interfacial tension (?12 + ?23) leading to less water permeation.

Dataset Information

Effect of Composition and Interfacial Tension on the Rheology and Morphology of Heavy Oil-In-Water Emulsions.

Publications

Effect of Composition and Interfacial Tension on the Rheology and Morphology of Heavy Oil-In-Water Emulsions.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets