Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and characterization of trimeric phosphazene based ionic liquids with tetrafluoroborate anions and their thermal investigations.

ABSTRACT: The quaternized compounds (PzIL1-9) reacted with sodium tetrafluoroborate (NaBF₄) to generate phosphazene based ionic liquids (PzILs), PzIL1a-9a. The newly synthesized ionic compounds (PzIL1a-9a) were verified using elemental CHN analyses and functional and spectroscopic (FTIR and ¹H, ¹³C, ³¹P-NMR) analyses techniques. The thermal properties of PzIL1a-9a were investigated using thermogravimetric analysis (TGA). According to the initial decomposition temperature values calculated based on the TGA thermograms, PzIL7a (213 °C) was recognized to be more thermally stable than the other PzILs studied. PzIL1a-9a exhibited good solubility in the water and demonstrate a typical dielectric relaxation behavior, conductivity levels for both low and high-frequency regions. AC conductivity mechanisms and dielectric relaxation behavior of each sample are investigated by fabricating parallel plate capacitors.

SUBMITTER: Karadag A

PROVIDER: S-EPMC7367273 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Impact of Anions on the Partition Constant, Self-Diffusion, Thermal Stability, and Toxicity of Dicationic Ionic Liquids.

Project description:Partition constants (KD°), molecular dynamics (T1, T2, and DOSY measurements), thermal stability, and toxicity of dicationic ionic liquids (ILs) were determined. The dicationic ILs derived from 1,n-bis(3-methylimidazolim-1-yl)octane, [BisOct(MIM)2][2X] (in which X = Cl, Br, NO3, SCN, BF4, and NTf2), were evaluated to verify the influence of anion structure on the IL properties. A monocationic IL [Oct(MIM)][Br] was also monitored for comparison. In general, the solubility of the ILs followed the anion free energy of hydration (ΔG°hyd). The thermokinetic and thermodynamic functions of activation of the ILs were determined via thermogravimetric data, and it was observed that polyatomic anions influence the decomposition mechanism of these IL structures. Furthermore, [Oct(MIM)][Br] had a decomposition rate greater than that of the dicationic analogue, and the thermodynamic parameters of activation data corroborate these results. Finally, the dicationic ILs did not indicate toxic effects (LD50 > 40 mM).

| S-EPMC6044912 | biostudies-literature

Tunning CO2 Separation Performance of Ionic Liquids through Asymmetric Anions.

Project description:This work aims to explore the gas permeation performance of two newly-designed ionic liquids, [C2mim][CF3BF3] and [C2mim][CF3SO2C(CN)2], in supported ionic liquid membranes (SILM) configuration, as another effort to provide an overall insight on the gas permeation performance of functionalized-ionic liquids with the [C2mim]+ cation. [C2mim][CF3BF3] and [C2mim][CF3SO2C(CN)2] single gas separation performance towards CO2, N2, and CH4 at T = 293 K and T = 308 K were measured using the time-lag method. Assessing the CO2 permeation results, [C2mim][CF3BF3] showed an undermined value of 710 Barrer at 293.15 K and 1 bar of feed pressure when compared to [C2mim][BF4], whereas for the [C2mim][CF3SO2C(CN)2] IL an unexpected CO2 permeability of 1095 Barrer was attained at the same experimental conditions, overcoming the results for the remaining ILs used for comparison. The prepared membranes exhibited diverse permselectivities, varying from 16.9 to 22.2 for CO2/CH4 and 37.0 to 44.4 for CO2/N2 gas pairs. The thermophysical properties of the [C2mim][CF3BF3] and [C2mim][CF3SO2C(CN)2] ILs were also determined in the range of T = 293.15 K up to T = 353.15 K at atmospheric pressure and compared with those for other ILs with the same cation and anion's with similar chemical moieties.

| S-EPMC8778609 | biostudies-literature

Coexistence of Tellurium Cations and Anions in Phosphonium-Based Ionic Liquids.

Project description:Elemental tellurium readily dissolves in ionic liquids (ILs) based on tetraalkylphosphonium cations even at temperatures below 100 °C. In the case of ILs with acetate, decanoate, or dicyanamide anions, dark red to purple colored solutions form. A study combining NMR, UV-Vis and Raman spectroscopy revealed the formation of tellurium anions (Ten )2- with chain lengths up to at least n=5, which are in dynamic equilibrium with each other. Since external influences could be excluded and no evidence of an ionic liquid reaction was found, disproportionation of the tellurium is the only possible dissolution mechanism. Although the spectroscopic detection of tellurium cations in these solutions is difficult, the coexistence of tellurium cations, such as (Te4 )2+ and (Te6 )4+ , and tellurium anions could be proven by cyclic voltammetry and electrodeposition experiments. DFT calculations indicate that electrostatic interactions with the ions of the ILs are sufficient to stabilize both types of tellurium ions in solution.

| S-EPMC9304316 | biostudies-literature

Dissolving Cellulose in 1,2,3-Triazolium- and Imidazolium-Based Ionic Liquids with Aromatic Anions.

Project description:We present 1,2,3-triazolium- and imidazolium-based ionic liquids (ILs) with aromatic anions as a new class of cellulose solvents. The two anions in our study, benzoate and salicylate, possess a lower basicity when compared to acetate and therefore should lead to a lower amount of N-heterocyclic carbenes (NHCs) in the ILs. We characterize their physicochemical properties and find that all of them are liquids at room temperature. By applying force field molecular dynamics (MD) simulations, we investigate the structure and dynamics of the liquids and find strong and long-lived hydrogen bonds, as well as significant ?-? stacking between the aromatic anion and cation. Our ILs dissolve up to 8.5 wt.-% cellulose. Via NMR spectroscopy of the solution, we rule out chain degradation or derivatization, even after several weeks at elevated temperature. Based on our MD simulations, we estimate the enthalpy of solvation and derive a simple model for semi-quantitative prediction of cellulose solubility in ILs. With the help of Sankey diagrams, we illustrate the hydrogen bond network topology of the solutions, which is characterized by competing hydrogen bond donors and acceptors. The hydrogen bonds between cellulose and the anions possess average lifetimes in the nanosecond range, which is longer than found in common pure ILs.

| S-EPMC7435399 | biostudies-literature

Synthesis and characterization data of monocationic and dicationic ionic liquids or molten salts.

Project description:Data presented in this article are related with the research paper entitled "Ecotoxicity assessment of dicationic versus monocationic ionic liquids as a more environmentally friendly alternative" [1]. The present article describes the synthesis steps and characterization data of a set of twenty-six imidazolium, pyrrolidinium and pyridinium-based ionic liquids (ILs) or molten salts: nine monocationic and seventeen dicationic. Specifically, the chemical structure of the compounds was confirmed by 1H NMR, 13C NMR and 19F NMR spectroscopy and mass spectrometry (MS). Other data such as physical state at room temperature, melting point temperature (for solids at room temperature) and thermal decomposition temperature (when melting was not reached before decomposition) of the ILs or molten salts are also reported here.

| S-EPMC5997918 | biostudies-literature

Effect of 1-Ethyl-3-methylimidazolium Tetrafluoroborate and Acetate Ionic Liquids on Stability and Amyloid Aggregation of Lysozyme.

Project description:Amyloid fibrils draw attention as potential novel biomaterials due to their high stability, strength, elasticity or resistance against degradation. Therefore, the controlled and fast fibrillization process is of great interest, which raises the demand for effective tools capable of regulating amyloid fibrillization. Ionic liquids (ILs) were identified as effective modulators of amyloid aggregation. The present work is focused on the study of the effect of 1-ethyl-3-methyl imidazolium-based ILs with kosmotropic anion acetate (EMIM-ac) and chaotropic cation tetrafluoroborate (EMIM-BF4) on the kinetics of lysozyme amyloid aggregation and morphology of formed fibrils using fluorescence and CD spectroscopy, differential scanning calorimetry, AFM with statistical image analysis and docking calculations. We have found that both ILs decrease the thermal stability of lysozyme and significantly accelerate amyloid fibrillization in a dose-dependent manner at concentrations of 0.5%, 1% and 5% (v/v) in conditions and time-frames when no fibrils are formed in ILs-free solvent. The effect of EMIM-BF4 is more prominent than EMIM-ac due to the different specific interactions of the anionic part with the protein surface. Although both ILs induced formation of amyloid fibrils with typical needle-like morphology, a higher variability of fibril morphology consisting of a different number of intertwining protofilaments was identified for EMIM-BF4.

| S-EPMC8775716 | biostudies-literature

Design and Characterization of Naphthalene Ionic Liquids.

Project description:Surfactants have a great number of applications. Among these chemicals, petroleum sulfonates have been widely used due to their effectiveness in reducing interfacial tension. This is the case of sodium octylnaphthalene sulfonate which is a solid with a very low solubility in water. To overcome these drawbacks, this work aimed to synthesize new surface active ionic liquids based on a naphthalene sulfonate anion and traditional cations of these salts (imidazolium, pyrrolidinium, and pyridinium). The new chemicals showed high thermal stability, ionic liquid nature, and a stronger surfactant character than the original naphthalene. Moreover, they were found to be water soluble which greatly facilitates their application in the form of aqueous formulations. 1-Hexyl-3-methylimidazolium 4-(n-octyl)naphthalene-1-sulfonate showed the best capacity to reduce water-air and water-oil interfacial tension.

| S-EPMC7105854 | biostudies-literature

Novel 3-Methyl-2-alkylthio Benzothiazolyl-Based Ionic Liquids: Synthesis, Characterization, and Antibiotic Activity.

Project description:Three series of novel 3-methyl-2-alkylthio benzothiazolyl ionic liquids (ILs) were synthesized for the first time. After structural identification, their melting point, solubility, and thermostability together with antibiotic activity were determined successively. As a result, 3-methyl-2-alkylthio benzothiazolyl p-toluene sulfonate was found to have the highest antibacterial activity among the three series of ILs. Meanwhile, it has a good solubility in water as well. On the basis of comprehensive comparison with similar compounds, the effect of cations and anions of these benzothiazolium ILs on typical physical properties together with antibiotic performance was explored and discussed, which is very beneficial to take the greatest advantage of their structural designability for various purposes. Furthermore, the experiment data preliminarily discovered the relationships of the structure-properties/activities of the above three kinds ILs to a certain extent, which can provide useful references for future research and for the potential application of these new ILs as surfactant antiseptics or agricultural chemicals.

| S-EPMC6222442 | biostudies-literature

Bioderived Ionic Liquids and Salts with Various Cyano Anions as Precursors for Doped Carbon Materials.

Project description:Carbohydrate moieties were combined with various cross-linkable anions (thiocyanate [SCN], tetracyanoborate [TCB], tricyanomethanide [TCM], and dicyanamide [DCA]) and investigated as precursors for the synthesis of nitrogen-doped and nitrogen-/sulfur-co-doped carbons. The influence of the molecular structures of the precursors on their thermophysical properties and the properties of the derived carbon materials was elucidated and compared to petroleum-derived analogs. A carbohydrate-based ionic liquid featuring an [SCN] anion yielded more carbon residues upon carbonization than its 1-ethyl-3-methylimidazolium analog, and the resulting dual-doping of the derived carbon material translated to enhanced catalytic activity in the oxygen reduction reaction.

| S-EPMC8508855 | biostudies-literature

Tetrahydrothiophene-Based Ionic Liquids: Synthesis and Thermodynamic Characterizations.

Project description:S-alkyltetrahydrothiophenium, [Cn THT]+ bis(trifluorosulfonyl)imide, [NTf2 ]- room temperature ionic liquids (ILs) and tetraphenylborate, [BPh4 ]- salts with alkyl chain lengths from C4 to C10 have been prepared. The ILs and salts were characterized and their purity verified by 1 H- and 13 C-nuclear magnetic resonance, elemental analysis, ion chromatography, Karl-Fischer titration, single crystal X-ray diffraction as well as thermogravimetric analysis. The experimentally determined density and viscosity decrease with increasing temperature. The experimental solubility of the [Cn THT][NTf2 ]-ILs in water (75 to 2.2 mg/L for C4 to C10 ) was modelled with very good agreement by Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT), based on the extremely low vapor pressures for the [Cn THT][NTf2 ]-ILs measured in this work (4.15 to 0.037 ⋅ 10-7 ×psat for C4 to C10 ). PC-SAFT is able to predict and correlate different thermodynamic properties by estimating the Helmholtz residual energy.

| S-EPMC7874261 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data