Paper-Based Batteries as Conductivity Sensors for Single-Use Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Ortega L
PROVIDER: S-EPMC7373093 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Paper has been pursued as an interesting substrate material for sensors in applications such as microfluidics, bio-sensing of analytes and printed microelectronics. It offers advantages of being inexpensive, lightweight, environmentally friendly and easy to use. However, currently available paper-based mechanical sensors suffer from inadequate range and accuracy. Here, using the principle of supercapacitive sensing, we fabricate force sensors from paper with ultra-high sensitivity and unprecedented configurability. The high sensitivity comes from the sensitive dependence of a supercapacitor's response on the contact area between a deformable electrolyte and a pair of electrodes. As a key component, we develop highly deformable electrolytes by coating ionic gel on paper substrates which can be cut and shaped into complex three-dimensional geometries. Paper dissolves in the ionic gel after determining the shape of the electrolytes, leaving behind transparent electrolytes with micro-structured fissures responsible for their high deformability. Exploiting this simple paper-based fabrication process, we construct diverse sensors of different configurations that can measure not just force but also its normal and shear components. The new sensors have range and sensitivity several orders of magnitude higher than traditional MEMS capacitive sensors, in spite of their being easily fabricated from paper with no cleanroom facilities.
| S-EPMC6214964 | biostudies-literature
Project description:Conducting polymers for battery applications have been subject to numerous investigations during the last two decades. However, the functional charging rates and the cycling stabilities have so far been found to be insufficient for practical applications. These shortcomings can, at least partially, be explained by the fact that thick layers of the conducting polymers have been used to obtain sufficient capacities of the batteries. In the present letter, we introduce a novel nanostructured high-surface area electrode material for energy storage applications composed of cellulose fibers of algal origin individually coated with a 50 nm thin layer of polypyrrole. Our results show the hitherto highest reported charge capacities and charging rates for an all polymer paper-based battery. The composite conductive paper material is shown to have a specific surface area of 80 m(2) g(-1) and batteries based on this material can be charged with currents as high as 600 mA cm(-2) with only 6% loss in capacity over 100 subsequent charge and discharge cycles. The aqueous-based batteries, which are entirely based on cellulose and polypyrrole and exhibit charge capacities between 25 and 33 mAh g(-1) or 38-50 mAh g(-1) per weight of the active material, open up new possibilities for the production of environmentally friendly, cost efficient, up-scalable and lightweight energy storage systems.
| S-EPMC2847384 | biostudies-literature
Project description:Paper electronics offer an environmentally sustainable option for flexible and wearable systems and perfectly fit the available printing technologies for high manufacturing efficiency. As the heart of energy-consuming devices, paper-based batteries are required to be compatible with printing processes with high fidelity. Herein, hydrogel reinforced cellulose paper (HCP) is designed to serve as the separator and solid electrolyte for paper batteries. The HCP can sustain higher strain than pristine papers and are biodegradable in natural environment within four weeks. Zinc-metal (Ni and Mn) batteries printed on the HCP present remarkable volumetric energy density of ≈26 mWh cm-3 , and also demonstrate the feature of cuttability and compatibility with flexible circuits and devices. As a result, self-powered electronic system could be constructed by integrating printed paper batteries with solar cells and light-emitting diodes. The result highlights the feasibility of hydrogel reinforced paper for ubiquitous flexible and eco-friendly electronics.
| S-EPMC8760176 | biostudies-literature
Project description:Chemically functionalized carbon nanotubes (CNTs) are promising materials for sensing of gases and volatile organic compounds. However, the poor solubility of carbon nanotubes hinders their chemical functionalization and the subsequent integration of these materials into devices. This manuscript describes a solvent-free procedure for rapid prototyping of selective chemiresistors from CNTs and graphite on the surface of paper. This procedure enables fabrication of functional gas sensors from commercially available starting materials in less than 15 min. The first step of this procedure involves the generation of solid composites of CNTs or graphite with small molecule selectors--designed to interact with specific classes of gaseous analytes--by solvent-free mechanical mixing in a ball mill and subsequent compression. The second step involves deposition of chemiresistive sensors by mechanical abrasion of these solid composites onto the surface of paper. Parallel fabrication of multiple chemiresistors from diverse composites rapidly generates cross-reactive arrays capable of sensing and differentiating gases and volatile organic compounds at part-per-million and part-per-thousand concentrations.
| S-EPMC3761578 | biostudies-literature
Project description:An inkjet-printed paper-based Surface-enhanced Raman scattering (SERS) sensor is a robust and versatile device that provides trace sensing capabilities for the detection and analysis of narcotics and drugs. Such sensors generally work well for analytes with good binding affinity towards the Au or Ag plasmonic nanoparticles (NPs) resident in the sensors. In this report, we show that iodide functionalization of the printed sensors helps to remove adsorbed contaminants from AuNP surfaces enabling superior performance with improved detection of narcotics such as fentanyl, heroin and cocaine by SERS. SERS signals are easily doubled with the iodide-functionalized sensors which also showed orders of magnitude improvement in detection limit. In this report, we show that a short (90 s) iodide treatment of the sensors significantly improved the detection of heroin. We propose that iodide functionalization be integrated into field detection kits through the solvent that wets paper-based sensor prior to swabbing for narcotics. Alternatively, we have also demonstrated that iodide functionalized sensors can be stored in ambient for up to 1 week and retain the improved performance towards heroin detection. This report will help to significantly improve the performance of paper-based sensors for field detection of narcotic drugs.
| S-EPMC8455876 | biostudies-literature
Project description:Flexible paper-based force sensors have garnered significant attention for their important potential applications in healthcare wearables, portable electronics, etc. However, most studies have only used paper as the flexible substrate for sensors, not fully exploiting the potential of paper's micro-nanostructure for sensing. This article proposes a novel approach where paper serves both as the sensitive element and the flexible substrate of force sensors. Under external mechanical forces, the micro-nanostructure of the conductive-treated paper will change, leading to significant changes in the related electrical output and thus enabling sensing. To demonstrate the feasibility and universality of this new method, the article takes paper-based capacitive pressure sensors and paper-based resistive strain sensors as examples, detailing their fabrication processes, constructing sensing principle models based on the micro-nanostructure of paper materials, and testing their main sensing performance. For the capacitive paper-based pressure sensor, it achieves a high sensitivity of 1.623 kPa-1, a fast response time of 240 ms, and a minimum pressure resolution of 4.1 Pa. As for the resistive paper-based strain sensor, it achieves a high sensitivity of 72 and a fast response time of 300 ms. The proposed new method offers advantages such as high sensitivity, simplicity in the fabrication process, environmental friendliness, and cost-effectiveness, providing new insights into the research of flexible force sensors.
| S-EPMC10892271 | biostudies-literature
Project description:We present a deep learning-based framework to design and quantify point-of-care sensors. As a use-case, we demonstrated a low-cost and rapid paper-based vertical flow assay (VFA) for high sensitivity C-Reactive Protein (hsCRP) testing, commonly used for assessing risk of cardio-vascular disease (CVD). A machine learning-based framework was developed to (1) determine an optimal configuration of immunoreaction spots and conditions, spatially-multiplexed on a sensing membrane, and (2) to accurately infer target analyte concentration. Using a custom-designed handheld VFA reader, a clinical study with 85 human samples showed a competitive coefficient-of-variation of 11.2% and linearity of R 2 = 0.95 among blindly-tested VFAs in the hsCRP range (i.e., 0-10 mg/L). We also demonstrated a mitigation of the hook-effect due to the multiplexed immunoreactions on the sensing membrane. This paper-based computational VFA could expand access to CVD testing, and the presented framework can be broadly used to design cost-effective and mobile point-of-care sensors.
| S-EPMC7206101 | biostudies-literature
Project description:Antimicrobial stewardship practices are critical in preventing the further erosion of treatment options for bacterial infections. Yet, at the same time, determination of an infection's antimicrobial susceptibility requires multiple rounds of culture and expensive lab automation systems. In this work, we report the use of paper-based surface enhanced Raman spectroscopy (SERS) sensors and portable instrumentation to phenotypically discriminate multi-drug resistance with fewer culture steps than conventional clinical microbiology. Specifically, we demonstrate the identification of resistance to varying generations of β-lactam antibiotics by detecting the activity of particular β-lactamase enzymes in a multiplexed assay. The method utilizes molecular reporters that consist of β-lactams with SERS barcodes. Hydrolysis of the β-lactam by β-lactamase enzymes in the sample expels the barcode; the released sulfur-containing barcode is then detected via SERS. Using this approach, we demonstrate the differentiation of E. coli strains with (1) extended spectrum β-lactamase (ESBL), (2) narrow-spectrum β-lactamase, and (3) no resistance, using only a single measurement on a single sample. In addition, we experimentally validate an approach to expand the library of reporters through the simple chemical synthesis of new barcoded β-lactams. Importantly, the reported method determines the susceptibility based on phenotypic β-lactamase activity, which is aligned with current microbiology lab standards. This new method will enable the precise selection of effective β-lactam antibiotics (as opposed to defaulting to drugs of last resort) faster than current methods while using simple steps and low-cost portable instrumentation.
| S-EPMC10069952 | biostudies-literature
Project description:Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming.
| S-EPMC5863975 | biostudies-literature
Project description:Sensors based on fluorogenic RNA aptamers have emerged in recent years. These sensors have been used for in vitro and intracellular detection of a broad range of biological and medical targets. However, the potential application of fluorogenic RNA-based sensors for point-of-care testing is still little studied. Here, we report a paper substrate-based portable fluorogenic RNA sensor system. Target detection can be simply performed by rehydration of RNA sensor-embedded filter papers. This affordable sensor system can be used for the selective, sensitive, and rapid detection of different target analytes, such as antibiotics and cellular signaling molecules. We believe that these paper-based fluorogenic RNA sensors show great potential for point-of-care testing of a wide range of targets from small molecules, nucleic acids, proteins, to various pathogens.
| S-EPMC7747226 | biostudies-literature