Dataset Information

Comparison of measurement methods for the characterization of the black carbon emissions from a T63 turboshaft engine burning conventional and Fischer-Tropsch fuels.

ABSTRACT: Emission measurements of black carbon (BC) mass were conducted on a T63 turboshaft engine, operated at idle and cruise power with conventional and alternative fuels, using an Artium LII-300 laser-induced incandescence analyzer (LII) and AVL model 483 micro soot sensor (MSS) photoacoustic instrument using the manufacturer's calibration for both instruments. These measurements were compared with elemental carbon (EC) determined by manual and semicontinuous thermal-optical transmission analyses according to National Institute for Occupational Safety and Health (NIOSH) method 5040 as the reference method. The results indicate that both the LII and MSS instruments show good linear correlation with EC for the two fuels and two engine power conditions evaluated. The LII measurements were observed to be biased high (27-49%) and the MSS measurements were biased low (24-35%) relative to EC. The agreement between the instruments and the reference method was substantially improved by applying a calibration of the instruments against a common BC aerosol source. Test data also suggest that the two instruments show some sensitivity to particle size (or properties related to size), specifically for particles with a geometric mean diameter (GMD) <30 nm. This sensitivity is problematic, since new engines or certain combustion conditions in current engines will produce smaller particles compared with the T63 model tested in this study. Further assessments of instrument performance for particles within this size range are therefore warranted. Implications: Accurate black carbon emission measurements are needed to certify new and in-production commercial aircraft engines. Both the Artium LII-300 and AVL 483 micro soot sensor are currently approved by the International Civil Aviation Organization for this purpose. This study compares the two instruments against elemental carbon (EC) using NIOSH method 5040 as the reference using a T63 turboshaft engine. The results indicate that both instruments correlate reasonably well with EC, and the correlation substantially improved when applying a calibration against a common aerosol source. Sensitivity to particle size may be an issue for both instruments.

SUBMITTER: Kinsey JS

PROVIDER: S-EPMC7382935 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Comparison of measurement methods for the characterization of the black carbon emissions from a T63 turboshaft engine burning conventional and Fischer-Tropsch fuels.

Kinsey John S JS Corporan Edwin E Pavlovic Jelica J DeWitt Matthew M Klingshirn Christopher C Logan Russell R

Journal of the Air & Waste Management Association (1995) 20190301 5

Emission measurements of black carbon (BC) mass were conducted on a T63 turboshaft engine, operated at idle and cruise power with conventional and alternative fuels, using an Artium LII-300 laser-induced incandescence analyzer (LII) and AVL model 483 micro soot sensor (MSS) photoacoustic instrument using the manufacturer's calibration for both instruments. These measurements were compared with elemental carbon (EC) determined by manual and semicontinuous thermal-optical transmission analyses acc ...[more]

PMID: 30526430

Similar Datasets

Project description:Renewable liquid fuels production from landfill waste provides a promising alternative to conventional carbon-intensive waste management methods and has the potential to contribute to the transition toward low-carbon fuel pathways. In this work, we investigated the life cycle greenhouse gas (GHG) emissions of producing Fischer-Tropsch diesel from landfill gas (LFG) using the TriFTS catalytic conversion process and compared it to fossil-based petroleum diesel. A life cycle-based comparison was made between TriFTS diesel and other LFG waste management pathways, LFG-to-Electricity and LFG-to-Compressed renewable natural gas (RNG), on a per kilogram of feedstock basis as well as on a per MJ of energy basis, which also included the LFG-to-Direct Combustion pathway. The study considered flaring of LFG as the common underlying counterfactual scenario for all of the waste-to-energy product pathways. We estimated the life cycle GHG emissions for TriFTS diesel to be -36.4 carbon dioxide equivalent (grams CO2e)/MJ which is significantly lower than its fossil fuel counterpart which was estimated to be 90.5 g CO2e/MJ on a cradle-to-grave basis. The life cycle emission results from both perspectives (per kg feedstock and per MJ energy output) show that TriFTS diesel is a viable alternative energy pathway from LFG when compared to other pathways, primarily due to the main product being a renewable fuel that can serve as a drop-in fuel for diesel-based uses, within both the waste industry as well as the larger market. Further sensitivity analysis was performed based on the production of TriFTS diesel with the counterfactual waste management scenario of LFG-to-Flaring as well as the alternative LFG-to-Electricity waste management pathway. The sensitivity of the carbon intensity for TriFTS diesel to flaring efficiency and the carbon intensity of the electricity grid were also investigated. The study highlights the potential for the TriFTS conversion process technology to contribute to the waste industry's closed loop and decarbonization initiatives and to provide low carbon fuel for transportation.

Project description:Adjusting hydrocarbon product distributions in the Fischer-Tropsch (FT) synthesis is of notable significance in the context of so-called X-to-liquids (XTL) technologies. While cobalt catalysts are selective to long-chain paraffin precursors for synthetic jet- and diesel-fuels, lighter (C10-) alkane condensates are less valuable for fuel production. Alternatively, iron carbide-based catalysts are suitable for the coproduction of paraffinic waxes alongside liquid (and gaseous) olefin chemicals; however, their activity for the water-gas-shift reaction (WGSR) is notoriously detrimental when hydrogen-rich syngas feeds, for example, derived from (unconventional) natural gas, are to be converted. Herein the roles of pore architecture and oxide promoters of Lewis basic character on CoRu/Al2O3 FT catalysts are systematically addressed, targeting the development of catalysts with unusually high selectivity to liquid olefins. Both alkali and lanthanide oxides lead to a decrease in turnover frequency. The latter, particularly PrO x , prove effective to boost the selectivity to liquid (C5-10) olefins without undesired WGSR activity. In situ CO-FTIR spectroscopy suggests a dual promotion via both electronic modification of surface Co sites and the inhibition of Lewis acidity on the support, which has direct implications for double-bond isomerization reactivity and thus the regioisomery of liquid olefin products. Density functional theory calculations ascribe oxide promotion to an enhanced competitive adsorption of molecular CO versus hydrogen and olefins on oxide-decorated cobalt surfaces, dampening (secondary) olefin hydrogenation, and suggest an exacerbated metal surface carbophilicity to underlie the undesired induction of WGSR activity by strongly electron-donating alkali oxide promoters. Enhanced pore molecular transport within a multimodal meso-macroporous architecture in combination with PrO x as promoter, at an optimal surface loading of 1 Prat nm-2, results in an unconventional product distribution, reconciling benefits intrinsic to Co- and Fe-based FT catalysts, respectively. A chain-growth probability of 0.75, and thus >70 C% selectivity to C5+ products, is achieved alongside lighter hydrocarbon (C5-10) condensates that are significantly enriched in added-value chemicals (67 C%), predominantly α-olefins but also linear alcohols, remarkably with essentially no CO2 side-production (<1%). Such unusual product distributions, integrating precursors for synthetic fuels and liquid platform chemicals, might be desired to diversify the scope and improve the economics of small-scale gas- and biomass-to-liquid processes.

Dataset Information

Comparison of measurement methods for the characterization of the black carbon emissions from a T63 turboshaft engine burning conventional and Fischer-Tropsch fuels.

Publications

Comparison of measurement methods for the characterization of the black carbon emissions from a T63 turboshaft engine burning conventional and Fischer-Tropsch fuels.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets