Dataset Information

Training load quantification of high intensity exercises: Discrepancies between original and alternative methods.

ABSTRACT: The purpose of this study was to quantify training loads (TL) of high intensity sessions through original methods (TRIMP; session-RPE; Work-Endurance-Recovery) and their updated alternatives (TRIMPcumulative; RPEalone; New-WER). Ten endurance athletes were requested to perform five sessions until exhaustion. Session 1 composed by a 800m maximal performance and four intermittent sessions performed at the 800m velocity, three sessions with 400m of interval length and work:recovery ratios of 2:1, 1:1 and 1:2 and one with 200m intervals and 1:1. Total TL were quantified from the sessions' beginning to the cool-down period and an intermediate TL (TL800) was calculated when 800m running was accumulated within the sessions. At the end of the sessions high and similar RPE were reported (effect size, ?2 = 0.12), while, at the intermediate 800m distance, the higher interval distances and work:recovery ratios the higher the RPE (?2 = 0.88). Our results show marked differences in sessions' total TL between original (e.g., lowest TL for the 800m and highest for the 200m-1:1 sessions) and alternative methods (RPEalone and New-WER; similar TL for each session). Differences appear in TL800 notably between TRIMP and other methods which are negatively correlated. All TL report light to moderate correlations between original methods and their alternatives, original methods are strongly correlated together, as observed for alternative methods. Differences in TL quantification between original and alternative methods underline that they are not interchangeable. Because of high exercise volume influence, original methods markedly enhance TL of sessions with higher exercise volumes although these presented the easiest interval distances and work-recovery ratios. Alternative methods based on exhaustion level (New-WER) and exertion (RPEalone) provided a new and promising point of view of TL quantification where exhaustion determines the highest TL whatever the exercise. This remains to be tested with more extended populations submitted to wider ranges of exercises.

SUBMITTER: Desgorces FD

PROVIDER: S-EPMC7398532 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Training load quantification of high intensity exercises: Discrepancies between original and alternative methods.

Desgorces François-Denis FD Hourcade Jean-Christophe JC Dubois Romain R Toussaint Jean-François JF Noirez Philippe P

PloS one 20200803 8

The purpose of this study was to quantify training loads (TL) of high intensity sessions through original methods (TRIMP; session-RPE; Work-Endurance-Recovery) and their updated alternatives (TRIMPcumulative; RPEalone; New-WER). Ten endurance athletes were requested to perform five sessions until exhaustion. Session 1 composed by a 800m maximal performance and four intermittent sessions performed at the 800m velocity, three sessions with 400m of interval length and work:recovery ratios of 2:1, 1 ...[more]

PMID: 32745112

Similar Datasets

Project description:Although core stability (CS) training is largely used to enhance motor performance and prevent musculoskeletal injuries, the lack of methods to quantify CS training intensity hinders the design of CS programs and the comparison and generalization of their effects. The aim of this study was to analyze the reliability of accelerometers integrated into smartphones to quantify the intensity of several CS isometric exercises. Additionally, this study analyzed to what extent the pelvic acceleration data represent the local stability of the core structures or the whole-body postural control. Twenty-three male and female physically-active individuals performed two testing-sessions spaced one week apart, each consisting of two 6-second trials of five variations of frontal bridge, back bridge, lateral bridge and bird-dog exercises. In order to assess load intensity based on the postural control challenge of CS exercises, a smartphone accelerometer and two force platforms were used to measure the mean pelvic linear acceleration and the mean velocity of the centre of pressure displacement, respectively. Reliability was assessed through the intra-class correlation coefficient (ICC3,1) and the standard error of measurement (SEM). In addition, Pearson coefficient was used to analyze the correlation between parameters. The reliability analysis showed that most CS exercise variations obtained moderate-to-high reliability scores for pelvic acceleration (0.71<ICC<0.88; 13.23%?SEM?22.99%) and low-to-moderate reliability scores for centre of pressure displacement (0.24<ICC<0.89; 9.88%?SEM?35.90%). Regarding the correlation analysis, correlations between pelvic acceleration and centre of pressure displacement were moderate-to-high (0.52?r?0.81). Based on these results, smartphone accelerometers seem reliable devices to quantify isometric CS exercise intensity, which is useful to identify the individuals' CS status and to improve the dose-response characterization of CS programs.

Project description:PurposeThis study aimed to apply open-source analysis code to raw habitual physical activity data from wrist-worn monitors to: 1) objectively, unobtrusively, and accurately discriminate between "running" and "nonrunning" days; and 2) develop and compare simple accelerometer-derived metrics of external training load with existing self-report measures.MethodsSeven-day wrist-worn accelerometer (GENEActiv; Activinsights Ltd, Kimbolton, UK) data obtained from 35 experienced runners (age, 41.9 ± 11.4 yr; height, 1.72 ± 0.08 m; mass, 68.5 ± 9.7 kg; body mass index, 23.2 ± 2.2 kg·m; 19 [54%] women) every other week over 9 to 18 wk were date-matched with self-reported training log data. Receiver operating characteristic analyses were applied to accelerometer metrics ("Average Acceleration," "Most Active-30mins," "Mins≥400 mg") to discriminate between "running" and "nonrunning" days and cross-validated (leave one out cross-validation). Variance explained in training log criterion metrics (miles, duration, training load) by accelerometer metrics (Mins≥400 mg, "workload (WL) 400-4000 mg") was examined using linear regression with leave one out cross-validation.ResultsMost Active-30mins and Mins≥400 mg had >94% accuracy for correctly classifying "running" and "nonrunning" days, with validation indicating robustness. Variance explained in miles, duration, and training load by Mins≥400 mg (67%-76%) and WL400-4000 mg (55%-69%) was high, with validation indicating robustness.ConclusionsWrist-worn accelerometer metrics can be used to objectively, unobtrusively, and accurately identify running training days in runners, reducing the need for training logs or user input in future prospective research or commercial activity tracking. The high percentage of variance explained in existing self-reported measures of training load by simple, accelerometer-derived metrics of external training load supports the future use of accelerometry for prospective, preventative, and prescriptive monitoring purposes in runners.

Project description:Purpose: Blood-Flow-Restriction (BFR) training provides the ability to achieve hypertrophy effects even though only light mechanical loads are applied. However, its impact on venous pressures and function are still unknown. Therefore, the present study investigates the influence of BFR-training on intravascular venous pressure and venous function in comparison to control exercises with low or high mechanical loads. Methods: In a randomized cross-over design, ten healthy men (27.6 ± 6.4 years) underwent three trials of unilateral knee-extensor exercise with three different training protocols, low-load- (LL-RT, 30% of the individual 1-repetition-maximum, 1RM), low-load BFR- (LL-BFR-RT, 30% 1RM, 50% limb occlusion pressure, LOP) and high-load resistance exercise (HL-RT, 75% 1RM). Exercise protocols contain about four sets of knee extension exercise (Range-of-Motion: 0-0-95°), separated by 60 s of rest. Each set was performed until volitional muscle failure. For analysis of changes in intravascular venous pressures and venous function, a venous catheter was placed at the exercising leg before each trial. Whereas venous pressures were recorded throughout the exercise trials, phlebodynamometric investigations were performed before and after each trial. Furthermore, subjective pain perception during and after exercise was accessed by visual analogue scale. One-way ANOVA was used to assess mean differences between training protocols, while two-way repeated-measures ANOVA (rANOVA; time x condition) was performed to compare changes in measures over time among conditions. Data were given as means ± standard deviation (SD). Results: In comparison to the exercise trials without venous occlusion, total workload was significantly lower in the LL-BFR-RT (LL-RT: 1745 ± 604 kg vs LL-BFR-RT: 1274 ± 237 kg vs HL-RT: 1847 ± 367 kg, p = 0.004) without indicating statistical differences in venous pressures during the exercise sets (interaction: p = 0.140) or pain perception (interaction: p = 0.574). Similarly, phlebodynamometric assessment of venous function (e.g. refill-time of the venous system pre-vs. post exercise trials-LL-RT: 29.7 ± 11.0 s vs 25.5 ± 9.6 s, LL-BFR-RT: 26.6 ± 13.0 s vs 27.3 ± 13.8 s, HL-RT: 25.9 ± 10.9 s vs 23.1 ± 8.2 s) revealed no time (p = 0.156), condition effect (p = 0.802) or their interactions (p = 0.382). Conclusion: The present study is the first one describing the acute effects of LL-BFR-RT to muscle failure on venous pressures and function in comparison to a LL- and HL-RT in the lower limbs. In contrast to the existing literature, LL-BFR-RT does not elevate the venous pressures during exercise higher than a comparative exercise without BFR and does not show any adverse effects on venous function after the exercise.

Project description:IntroductionSweeteners in tobacco products may influence use initiation and reinforcement, with special appeal to adolescents. Recent analytical studies of smokeless tobacco products (snuff, snus, dissolvables) detected flavorants identical to those added to confectionary products such as hard candy and chewing gum. However, these studies did not determine the levels of sweeteners. The objective of the present study was to quantify added sweeteners in smokeless tobacco products, a dissolvable product, electronic cigarette liquids and to compare with sweetener levels in confectionary products.MethodsSweetener content of US-sourced smokeless tobacco, electronic cigarette liquid, and confectionary product samples was analyzed by liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS).ResultsAll smokeless products contained synthetic high intensity sweeteners, with snus and dissolvables exceeding levels in confectionary products (as much as 25-fold). All snus samples contained sucralose and most also aspartame, but no saccharin. In contrast, all moist snuff samples contained saccharin. The dissolvable sample contained sucralose and sorbitol. Ethyl maltol was the most common sweet-associated component in electronic cigarette liquids.DiscussionSweetener content was dependent on product category, with saccharin in moist snuff, an older category, sucralose added at high levels to more recently introduced products (snus, dissolvable) and ethyl maltol in electronic cigarette liquid. The very high sweetener concentrations may be necessary for the consumer to tolerate the otherwise aversive flavors of tobacco ingredients. Regulation of sweetener levels in smokeless tobacco products may be an effective measure to modify product attractiveness, initiation and use patterns.ImplicationsDissolvables, snus and electronic cigarettes have been promoted as risk-mitigation products due to their relatively low content of nitrosamines and other tobacco toxicants. This study is the first to quantify high intensity sweeteners in snus and dissolvable products. Snus and dissolvables contain the high intensity sweetener, sucralose, at levels higher than in confectionary products. The high sweetness of alternative tobacco products makes these products attractive to adolescents. Regulation of sweetener content in non-cigarette products is suggested as an efficient means to control product palatability and to reduce initiation in adolescents.

Dataset Information

Training load quantification of high intensity exercises: Discrepancies between original and alternative methods.

Publications

Training load quantification of high intensity exercises: Discrepancies between original and alternative methods.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets