Validity of the Stryd Power Meter in Measuring Running Parameters at Submaximal Speeds.
Ontology highlight
ABSTRACT:
SUBMITTER: Imbach F
PROVIDER: S-EPMC7404478 | biostudies-literature | 2020 Jul
REPOSITORIES: biostudies-literature
Publications
Validity of the Stryd Power Meter in Measuring Running Parameters at Submaximal Speeds.
Imbach Frank F Candau Robin R Chailan Romain R Perrey Stephane S
Sports (Basel, Switzerland) 20200720 7
This study assessed the Stryd running power meter validity at sub-maximal speeds (8 to 19 km/h). Six recreational runners performed an incremental indoor running test. Power output (PO), ground contact time (GCT) and leg spring stiffness (LSS) were compared to reference measures recorded by portable metabolic analyser, force platforms and motion capture system. A Bayesian framework was conducted for systems validity and comparisons. We observed strong and positive linear relationships between St ...[more]
Similar Datasets
Project description:Human runners have long been thought to have the ability to consume a near-constant amount of energy per distance traveled, regardless of speed, allowing speed to be adapted to particular task demands with minimal energetic consequence.1-3 However, recent and more precise laboratory measures indicate that humans may in fact have an energy-optimal running speed.4-6 Here, we characterize runners' speeds in a free-living environment and determine if preferred speed is consistent with task- or energy-dependent objectives. We analyzed a large-scale dataset of free-living runners, which was collected via a commercial fitness tracking device, and found that individual runners preferred a particular speed that did not change across commonly run distances. We compared the data from lab experiments that measured participants' energy-optimal running speeds with the free-living preferred speeds of age- and gender-matched runners in our dataset and found the speeds to be indistinguishable. Human runners prefer a particular running speed that is independent of task distance and is consistent with the objective of minimizing energy expenditure. Our findings offer an insight into the biological objectives that shape human running preferences in the real world-an important consideration when examining human ecology or creating training strategies to improve performance and prevent injury.
| S-EPMC9169516 | biostudies-literature
Project description:Maximum running speed is an important locomotor parameter for many animals-predators as well as prey-and is thus of interest to palaeobiologists wishing to reconstruct the behavioural ecology of extinct species. A variety of approaches have been tried in the past including anatomical comparisons, bone scaling and strength, safety factors and ground reaction force analyses. However, these approaches are all indirect and an alternative approach is to create a musculoskeletal model of the animal and see how fast it can run. The major advantage of this approach is that all assumptions about the animal's morphology and physiology are directly addressed, whereas the exact same assumptions are hidden in the indirect approaches. In this paper, we present simple musculoskeletal models of three extant and five extinct bipedal species. The models predict top speed in the extant species with reasonably good agreement with accepted values, so we conclude that the values presented for the five extinct species are reasonable predictions given the modelling assumptions made. Improved musculoskeletal models and better estimates of soft tissue parameters will produce more accurate values. Limited sensitivity analysis is performed on key muscle parameters but there is considerable scope for extending this in the future.
| S-EPMC2279215 | biostudies-other
Project description:Inertial measurement units (IMUs) are small wearable sensors that have tremendous potential to be applied to clinical gait analysis. They allow objective evaluation of gait and movement disorders outside the clinic and research laboratory, and permit evaluation on large numbers of steps. However, repeatability and validity data of these systems are sparse for gait metrics. The purpose of this study was to determine the validity and between-day repeatability of spatiotemporal metrics (gait speed, stance percent, swing percent, gait cycle time, stride length, cadence, and step duration) as measured with the APDM Opal IMUs and Mobility Lab system. We collected data on 39 healthy subjects. Subjects were tested over two days while walking on a standard treadmill, split-belt treadmill, or overground, with IMUs placed in two locations: both feet and both ankles. The spatiotemporal measurements taken with the IMU system were validated against data from an instrumented treadmill, or using standard clinical procedures. Repeatability and minimally detectable change (MDC) of the system was calculated between days. IMUs displayed high to moderate validity when measuring most of the gait metrics tested. Additionally, these measurements appear to be repeatable when used on the treadmill and overground. The foot configuration of the IMUs appeared to better measure gait parameters; however, both the foot and ankle configurations demonstrated good repeatability. In conclusion, the IMU system in this study appears to be both accurate and repeatable for measuring spatiotemporal gait parameters in healthy young adults.
| S-EPMC5507609 | biostudies-literature
Project description:During running at a constant speed, the optimal stride frequency (SF) can be derived from the u-shaped relationship between SF and heart rate (HR). Changing SF towards the optimum of this relationship is beneficial for energy expenditure and may positively change biomechanics of running. In the current study, the effects of speed on the optimal SF and the nature of the u-shaped relation were empirically tested using Generalized Estimating Equations. To this end, HR was recorded from twelve healthy (4 males, 8 females) inexperienced runners, who completed runs at three speeds. The three speeds were 90%, 100% and 110% of self-selected speed. A self-selected SF (SFself) was determined for each of the speeds prior to the speed series. The speed series started with a free-chosen SF condition, followed by five imposed SF conditions (SFself, 70, 80, 90, 100 strides·min-1) assigned in random order. The conditions lasted 3 minutes with 2.5 minutes of walking in between. SFself increased significantly (p<0.05) with speed with averages of 77, 79, 80 strides·min-1 at 2.4, 2.6, 2.9 m·s-1, respectively). As expected, the relation between SF and HR could be described by a parabolic curve for all speeds. Speed did not significantly affect the curvature, nor did it affect optimal SF. We conclude that over the speed range tested, inexperienced runners may not need to adapt their SF to running speed. However, since SFself were lower than the SFopt of 83 strides·min-1, the runners could reduce HR by increasing their SFself.
| S-EPMC5653196 | biostudies-literature
Project description:Hebb (1949) described a "phase sequence" to be the sequential activation of sets of cell assemblies. Within the hippocampus, cell assemblies have been described as groups of coactive neurons whose place fields overlap. Membership of assemblies in a phase sequence changes systematically as a rat travels through an environment, serving to accelerate the temporal order that place fields are encountered during a single theta cycle. This sweeping forward of network activity ("look ahead"), results in locations in front of the animal being transiently represented. In this experiment, a population vector-based reconstruction method was used to capture the look ahead and reveals that the composition of the phase sequence changes with velocity, such that more cell assemblies are active within a theta cycle at higher running speeds. These results are consistent with hypotheses suggesting that hippocampal networks generate short time scale predictions of future events to optimize behavior.
| S-EPMC3367321 | biostudies-literature
Project description:Ground reaction force (GRF) is a key metric in biomechanical research, including parameters of loading rate (LR), first impact peak, second impact peak, and transient between first and second impact peaks in heel strike runners. The GRFs vary over time during stance. This study was aimed to investigate the variances of GRFs in rearfoot striking runners across incremental speeds. Thirty female and male runners joined the running tests on the instrumented treadmill with speeds of 2.7, 3.0, 3.3, and 3.7 m/s. The discrete parameters of vertical average loading rate in the current study are consistent with the literature findings. The principal component analysis was modeled to investigate the main variances (95%) in the GRFs over stance. The females varied in the magnitude of braking and propulsive forces (PC1, 84.93%), whereas the male runners varied in the timing of propulsion (PC1, 53.38%). The female runners dominantly varied in the transient between the first and second peaks of vertical GRF (PC1, 36.52%) and LR (PC2, 33.76%), whereas the males variated in the LR and second peak of vertical GRF (PC1, 78.69%). Knowledge reported in the current study suggested the difference of the magnitude and patterns of GRF between male and female runners across different speeds. These findings may have implications for the prevention of sex-specific running-related injuries and could be integrated with wearable signals for the in-field prediction and estimation of impact loadings and GRFs.
| S-EPMC8026898 | biostudies-literature
Project description:BackgroundStress fractures are injuries caused by repetitive loading during activities such as running. The application of advanced analytical methods such as machine learning to data from multiple wearable sensors has allowed for predictions of biomechanical variables associated with running-related injuries like stress fractures. However, it is unclear if data from a single wearable sensor can accurately estimate variables that characterize external loading during running such as peak vertical ground reaction force (vGRF), vertical impulse, and ground contact time. Predicting these biomechanical variables with a single wearable sensor could allow researchers, clinicians, and coaches to longitudinally monitor biomechanical running-related injury risk factors without expensive force-measuring equipment.PurposeWe quantified the accuracy of applying quantile regression forest (QRF) and linear regression (LR) models to sacral-mounted accelerometer data to predict peak vGRF, vertical impulse, and ground contact time across a range of running speeds.MethodsThirty-seven collegiate cross country runners (24 females, 13 males) ran on a force-measuring treadmill at 3.8-5.4 m/s while wearing an accelerometer clipped posteriorly to the waistband of their running shorts. We cross-validated QRF and LR models by training them on acceleration data, running speed, step frequency, and body mass as predictor variables. Trained models were then used to predict peak vGRF, vertical impulse, and contact time. We compared predicted values to those calculated from a force-measuring treadmill on a subset of data (n = 9) withheld during model training. We quantified prediction accuracy by calculating the root mean square error (RMSE) and mean absolute percentage error (MAPE).ResultsThe QRF model predicted peak vGRF with a RMSE of 0.150 body weights (BW) and MAPE of 4.27 ± 2.85%, predicted vertical impulse with a RMSE of 0.004 BW*s and MAPE of 0.80 ± 0.91%, and predicted contact time with a RMSE of 0.011 s and MAPE of 4.68 ± 3.00%. The LR model predicted peak vGRF with a RMSE of 0.139 BW and MAPE of 4.04 ± 2.57%, predicted vertical impulse with a RMSE of 0.002 BW*s and MAPE of 0.50 ± 0.42%, and predicted contact time with a RMSE of 0.008 s and MAPE of 3.50 ± 2.27%. There were no statistically significant differences between QRF and LR model prediction MAPE for peak vGRF (p = 0.549) or vertical impulse (p = 0.073), but the LR model's MAPE for contact time was significantly lower than the QRF model's MAPE (p = 0.0497).ConclusionsOur findings indicate that the QRF and LR models can accurately predict peak vGRF, vertical impulse, and contact time (MAPE < 5%) from a single sacral-mounted accelerometer across a range of running speeds. These findings may be beneficial for researchers, clinicians, or coaches seeking to monitor running-related injury risk factors without force-measuring equipment.
| S-EPMC8048400 | biostudies-literature
Project description:With the development of designed materials and structures, a wide array of micro/nanomachines with versatile functionalities are employed for specific sensing applications. Here, we demonstrated a magnetic propelled microdimer-based point-of-care testing system, which can be used to provide the real-time data of plasma glucose and lipids relying on the motion feedback of mechanical properties. On-demand and programmable speed and direction of the microdimers can be achieved with the judicious adjustment of the external magnetic field, while their velocity and instantaneous postures provide estimation of glucose, cholesterol, and triglycerides concentrations with high temporal accuracy. Numerical simulations reveal the relationship between motility performance and surrounding liquid properties. Such technology presents a point-of-care testing (POCT) approach to adapt to biofluid measurement, which advances the development of microrobotic system in biomedical fields.
| S-EPMC8660689 | biostudies-literature
Project description:Maximal oxygen uptake (VO2max) is often used to assess an individual's cardiorespiratory fitness. However, measuring this variable requires an athlete to perform a maximal exercise test which may be impractical, since this test requires trained staff and specialized equipment, and may be hard to incorporate regularly into training programs. The aim of this study is to develop a new model for predicting VO2max by exploiting its relationship to heart rate and accelerometer features extracted during submaximal running. To do so, we analyzed data collected from 31 recreational runners (15 men and 16 women) aged 19-26 years who performed a maximal incremental test on a treadmill. During this test, the subjects' heart rate and acceleration at three locations (the upper back, the lower back and the tibia) were continuously measured. We extracted a wide variety of features from the measurements of the warm-up and the first three stages of the test and employed a data-driven approach to select the most relevant ones. Furthermore, we evaluated the utility of combining different types of features. Empirically, we found that combining heart rate and accelerometer features resulted in the best model with a mean absolute error of 2.33 ml ? kg-1 ? min-1 and a mean absolute percentage error of 4.92%. The model includes four features: gender, body mass, the inverse of the average heart rate and the inverse of the variance of the total tibia acceleration during the warm-up stage of the treadmill test. Our model provides a practical tool for recreational runners in the same age range to estimate their VO2max from submaximal running on a treadmill. It requires two body-worn sensors: a heart rate monitor and an accelerometer positioned on the tibia.
| S-EPMC6025864 | biostudies-literature
Project description:Models for human running performances of various complexities and underlying principles have been proposed, often combining data from world record performances and bio-energetic facts of human physiology. The purpose of this work is to develop a novel, minimal and universal model for human running performance that employs a relative metabolic power scale. The main component is a self-consistency relation for the time dependent maximal power output. The analytic approach presented here is the first to derive the observed logarithmic scaling between world (and other) record running speeds and times from basic principles of metabolic power supply. Our hypothesis is that various female and male record performances (world, national) and also personal best performances of individual runners for distances from 800m to the marathon are excellently described by this model. Indeed, we confirm this hypothesis with mean errors of (often much) less than 1%. The model defines endurance in a way that demonstrates symmetry between long and short racing events that are separated by a characteristic time scale comparable to the time over which a runner can sustain maximal oxygen uptake. As an application of our model, we derive personalized characteristic race speeds for different durations and distances.
| S-EPMC6239296 | biostudies-literature