Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improved Self-Supporting and Ceramifiable Properties of Ceramifiable EPDM Composites by Adding Aramid Fiber.

ABSTRACT: Ceramifiable ethylene propylene diene monomer (EPDM) composites with fiber network structures were prepared by using aramid fiber (AF), ammonium polyphosphate (APP), and silicate glass frits (SGF). The effect of AF on the curing characteristic of the ceramifiable EPDM composites was studied. The morphology of AF in the composites system was observed by optical microscopy (OM) and scanning electron microscope (SEM). The effects of the observed AF network structures on the solvent resistance, mechanical properties, ablative resistance, self-supporting property, and ceramifiable properties of the composites were investigated. Results suggested that the existence of the AF network structure improved the vulcanization properties, solvent resistance, thermal stability, and ablative resistance of the EPDM composites. An excellent self-supporting property of the EPDM composites was obtained by combining the formation of the AF network and the formation of crystalline phases at higher temperature (above 600 °C). The thermal shrinkage performance of AF and the increased thermal stability of the EPDM composites improved the ceramifiable properties of the EPDM composites.

SUBMITTER: Zhao D

PROVIDER: S-EPMC7408063 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication.

Project description:Recent development in the field of additive manufacturing, also known as three-dimensional (3D) printing, has allowed for the incorporation of continuous fiber reinforcement into 3D-printed polymer parts. These fiber reinforcements allow for the improvement of the mechanical properties, but compared to traditionally produced composite materials, the fiber volume fraction often remains low. This study aims to evaluate the in-nozzle impregnation of continuous aramid fiber reinforcement with glycol-modified polyethylene terephthalate (PETG) using a modified, low-cost, tabletop 3D printer. We analyze how dimensional printing parameters such as layer height and line width affect the fiber volume fraction and fiber dispersion in printed composites. By varying these parameters, unidirectional specimens are printed that have an inner structure going from an array-like to a continuous layered-like structure with fiber loading between 20 and 45 vol%. The inner structure was analyzed by optical microscopy and Computed Tomography (µCT), achieving new insights into the structural composition of printed composites. The printed composites show good fiber alignment and the tensile modulus in the fiber direction increased from 2.2 GPa (non-reinforced) to 33 GPa (45 vol%), while the flexural modulus in the fiber direction increased from 1.6 GPa (non-reinforced) to 27 GPa (45 vol%). The continuous 3D reinforced specimens have quality and properties in the range of traditional composite materials produced by hand lay-up techniques, far exceeding the performance of typical bulk 3D-printed polymers. Hence, this technique has potential for the low-cost additive manufacturing of small, intricate parts with substantial mechanical performance, or parts of which only a small number is needed.

| S-EPMC8778918 | biostudies-literature

Rivet-Inspired Modification of Aramid Fiber by Decorating with Silica Particles to Enhance the Interfacial Interaction and Mechanical Properties of Rubber Composites.

Project description:A rivet-inspired method of decorating aramid fiber (AF) with silica particles (SiO2) is proposed to produce SiO2@AF hybrid materials that have largely enhanced interfacial interaction with the rubber matrix. AF was firstly surface-modified with polyacrylic acid (PAA) to obtain PAA-AF, and SiO2 was silanized with 3-aminopropyltriethoxysilane to obtain APES-SiO2. Then, SiO2@AF was prepared by chemically bonding APES-SiO2 onto the surface of PAA-AF in the presence of dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP). With the incorporation of SiO2@AF into the rubber matrix, SiO2@AF hybrid materials with high surface roughness can play a role as 'rivets' to immobilize large numbers of rubber chains on the surface. The tear strength and tensile strength of rubber composite that filling 4 phr SiO2@AF are dramatically increased by 97.8% and 89.3% compared to pure rubber, respectively. Furthermore, SiO2@AF has superiority in enhancing the cutting resistance of rubber composites, in contrast with unmodified AF and SiO2. SiO2@AF is suitable to be applied as a novel reinforcing filler in rubber composites for high performance.

| S-EPMC7321641 | biostudies-literature

Pullout Behavior of Bundled Aramid Fiber in Fiber-Reinforced Cementitious Composite.

Project description:The tensile performance of fiber-reinforced cementitious composite (FRCC) after first matrix cracking is characterized by a tensile stress-crack width relationship called the bridging law. The bridging law can be obtained by an integral calculus of forces carried by individual bridging fibers considering the effect of the fiber inclination angle. The main objective of this study is to investigate experimentally and evaluate the pullout behavior of a single aramid fiber, which is made with a bundling of original yarns of aramid fiber. The bundled aramid fiber has a nonsmooth surface, and it is expected to have good bond performance with the matrix. The test variables in the pullout test are the thickness of the matrix and the inclined angle of the fiber. From the test results, the pullout load-slip curves showed that the load increases lineally until maximum load, after which it decreases gradually. The maximum pullout load and slip at the maximum load increase as the embedded length of the fiber becomes larger. The pullout load-crack width relationship is modeled by a bilinear model, and the bridging law is calculated. The calculated result shows good agreement with the experimental curves obtained by the uniaxial tension test of aramid-FRCC.

| S-EPMC7179034 | biostudies-literature

Self-Healing Capability of Fiber-Reinforced Cementitious Composites for Recovery of Watertightness and Mechanical Properties.

Project description:Various types of fiber reinforced cementitious composites (FRCCs) were experimentally studied to evaluate their self-healing capabilities regarding their watertightness and mechanical properties. Cracks were induced in the FRCC specimens during a tensile loading test, and the specimens were then immersed in static water for self-healing. By water permeability and reloading tests, it was determined that the FRCCs containing synthetic fiber and cracks of width within a certain range (<0.1 mm) exhibited good self-healing capabilities regarding their watertightness. Particularly, the high polarity of the synthetic fiber (polyvinyl alcohol (PVA)) series and hybrid fiber reinforcing (polyethylene (PE) and steel code (SC)) series showed high recovery ratio. Moreover, these series also showed high potential of self-healing of mechanical properties. It was confirmed that recovery of mechanical property could be obtained only in case when crack width was sufficiently narrow, both the visible surface cracks and the very fine cracks around the bridging of the SC fibers. Recovery of the bond strength by filling of the very fine cracks around the bridging fibers enhanced the recovery of the mechanical property.

| S-EPMC5453282 | biostudies-other

Preparation, Thermal Analysis, and Mechanical Properties of Basalt Fiber/Epoxy Composites.

Project description:In this study, basalt fiber-reinforced polymer (BFRP) composites with epoxy matrix, 20 layers, and volume fraction of fibers Vf = 53.66%, were prepared by a hand lay-up compression molding combined method. The fabric of the basalt fibers is in twill 2/2 weave. Through dynamic mechanical analysis (DMA), their viscoelastic behavior at elevated temperatures and in various frequencies was explored, whereas thermomechanical analysis (TMA) took part in terms of creep recovery and stress-relaxation tests. Moreover, the glass transition temperature (Tg) of the BFRP composites was determined through the peak of the tan? curves while the decomposition of the BFRP composites and basalt fibers, in air or nitrogen atmosphere, was explored through thermogravimetric analysis (TGA). The mechanical behavior of the BFRP composites was investigated by tensile and three-point bending experiments. The results showed that as the frequency is raised, the BFRP composites can achieve slightly higher Tg while, under the same circumstances, the storage modulus curve obtains a less steep decrease in the middle transition region. Moreover, the hand lay-up compression molding hybrid technique can be characterized as efficient for the preparation of polymer matrix composites with a relatively high Vf of over 50%. Remarkably, through the TGA experiments, the excellent thermal resistance of the basalt fibers, in the temperature range 30-900 °C, was revealed.

| S-EPMC7465910 | biostudies-literature

Improving the Mechanical and Surface Properties of Aramid Fiber by Grafting with 1,4-Dichlorobutane under Supercritical Carbon Dioxide.

Project description:The mechanical and surface properties of aramid fiber were simultaneously improved by grafting with 1,4-dichlorobutane in supercritical carbon dioxide (scCO2). 1,4-dichlorobutane was penetrated and reacted with heterocyclic an aromatic polyamide backbone along with supercritical CO2 fluids. The surface roughness and surface energy of the modified aramid fiber-which were measured by scanning electron microscopy (SEM) and the dynamic contact angle (DCA) test, respectively-significantly increased. X-ray diffractometer (XRD) measurements indicated that the crystallinity of the aramid fiber obviously increased after treatment in scCO2 under stretching. A single fiber tensile test showed that the tensile strength of the aramid fiber greatly enhanced after the modification due to its improved crystallinity characteristics. Moreover, the monofilament pull-out tests indicated that the interfacial shear strength (IFSS) test of the aramid fiber/epoxy composite increased by 24.3% from 51.30 to 63.91 MPa after the modification. This research provides a novel method for the simultaneous surface modification and mechanical improvement of aramid fiber properties.

| S-EPMC6888609 | biostudies-literature

Phlogopite-Reinforced Natural Rubber (NR)/Ethylene-Propylene-Diene Monomer Rubber (EPDM) Composites with Aminosilane Compatibilizer.

Project description:Rubber compounding with two or more components has been extensively employed to improve various properties. In particular, natural rubber (NR)/ethylene-propylene-diene monomer rubber (EPDM) blends have found use in tire and automotive parts. Diverse fillers have been applied to NR/EPDM blends to enhance their mechanical properties. In this study, a new class of mineral filler, phlogopite, was incorporated into an NR/EPDM blend to examine the mechanical, curing, elastic, and morphological properties of the resulting material. The combination of aminoethylaminopropyltrimethoxysilane (AEAPS) and stearic acid (SA) compatibilized the NR/EPDM/phlogopite composite, further improving various properties. The enhanced properties were compared with those of NR/EPDM/fillers composed of silica or carbon black (CB). Compared with the NR/EPDM/silica composite, the incompatibilized NR/EPDM/phlogopite composite without AEAPS exhibited poorer properties, but NR/EPDM/phlogopite compatibilized by AEAPS and SA showed improved properties. Most properties of the compatibilized NR/EPDM/phlogopite composite were similar to those of the NR/EPDM/CB composite, except for the lower abrasion resistance. The NR/EPDM/phlogopite/AEAPS rubber composite may potentially be used in various applications by replacing expensive fillers, such as CB.

| S-EPMC8309489 | biostudies-literature

Dataset on mechanical properties of natural fiber reinforced polyester composites for engineering applications.

Project description:This dataset comprises the mechanical properties of sisal, sorghum bicolor and coconut coir reinforced polyester composites. The mechanical dataset illustrates the tensile, flexural, impact and hardness strength of natural fiber composites by varying the weight percentages from 5 to 25 wt.% of sorghum bicolor and coconut coir. The composites samples were fabricated by hand layup process. The mechanical properties were determined from in-plane tensile, flexural, impact and hardness of the natural composites. The dataset here helps the readers to understand the important properties of the natural fibres reinforced polyester composites. However, it is revealed that the addition of sisal and coconut coir fiber can enhance the properties.

| S-EPMC6953528 | biostudies-literature

Unparalleled Armour for Aramid Fiber with Excellent UV Resistance in Extreme Environment.

Project description:Aramid fibers are widely used in many cutting-edge fields, including space, aviation, military, and electronics. However, their poor UV resistance and surface inertness seriously hinder their utilization, especially in harsh environments. Here, a dual-layer ultrathin Al2O3-TiO2 coating with a thickness of 70-180 nm is fabricated on aramid fibers by a modified atomic layer deposition (ALD) method. The tenacity of ALD-coated aramid fibers decreases only by ≈0.85% after exposure to intense UV light (4260 W m-2) under high temperature (>200 ℃) for 90 min, which equals to continuous exposure to sunlight for about 17 500 days. The as-prepared aramid fibers also show excellent laundering durability, thermal and chemical stabilities. This work presents a green and damage-free approach to achieve the highly anti-UV aramid fibers without sacrificing their outstanding performance, which is expected to guide material design for future innovations in functional fibers and devices.

| S-EPMC8224419 | biostudies-literature

Polydopamine-Modified Al2O3/Polyurethane Composites with Largely Improved Thermal and Mechanical Properties.

Project description:Alumina/polyurethane composites were prepared via in situ polymerization and used as thermal interface materials (TIMs). The surface of alumina particles was modified using polydopamine (PDA) and then evaluated via Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and Raman spectroscopy (Raman). Scanning electron microscope (SEM) images showed that PDA-Al2O3 has better dispersion in a polyurethane (PU) matrix than Al2O3. Compared with pure PU, the 30 wt% PDA-Al2O3/PU had 95% more Young's modulus, 128% more tensile strength, and 76% more elongation at break than the pure PU. Dynamic mechanical analysis (DMA) results showed that the storage modulus of the 30 wt% PDA-Al2O3/PU composite improved, and the glass transition temperature (Tg) shifted to higher temperatures. The thermal conductivity of the 30 wt% PDA-Al2O3/PU composite increased by 138%. Therefore, the results showed that the prepared PDA-coated alumina can simultaneously improve both the mechanical properties and thermal conductivity of PU.

| S-EPMC7179027 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data