Eco-Conversion of Two Winery Lignocellulosic Wastes into Fillers for Biocomposites: Vine Shoots and Wine Pomaces.
Ontology highlight
ABSTRACT:
SUBMITTER: David G
PROVIDER: S-EPMC7408111 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The use of wheat middlings (WM) and rice husks (RH) as biofillers for mixing with poly(lactic acid) (PLA) matrix to produce new 3D-printable biocomposites was assessed. Filaments containing 10 and 20 wt.% agro-waste-derived biofillers were manufactured and, for the sake of comparison, filaments of neat PLA were also produced. The obtained filaments were characterized via thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showing potential for further application in additive manufacturing processing. Three-dimensionally printed specimens were thus produced and characterized via: DSC, also evaluating the specific heat capacity (CP) of specific 3D-printed specimens; dynamic mechanical analysis (DMA), also applied for determining the coefficient of linear thermal expansion (CLTE) measured on 3D-printed specimens in two different directions (X and Y); and tensile tests. The latter testing campaign was carried out along three printing directions (X, Y, and Z axes) to test the intrinsic biocomposite features (X-printed samples) as well as interbead and interlayer adhesion (Y- and Z-printed specimens, respectively). All samples demonstrated acceptable properties. The inclusion of a cost-free natural material leads to a strong reduction of the whole material cost. Implementing this new class of composite material to an additive manufacturing technique can significantly reduce the environmental impact of 3D-printed products.
| S-EPMC10971891 | biostudies-literature
Project description:The effects of different anthropic activities (vineyard: phytosanitary protection; winery: pressing and sulfiting) on the fungal populations of grape berries were studied. The global diversity of fungal populations (moulds and yeasts) was performed by pyrosequencing. The anthropic activities studied modified fungal diversity. Thus, a decrease in biodiversity was measured for three successive vintages for the grapes of the plot cultivated with Organic protection compared to plots treated with Conventional and Ecophyto protections. The fungal populations were then considerably modified by the pressing-clarification step. The addition of sulfur dioxide also modified population dynamics and favoured the domination of the species Saccharomyces cerevisiae during fermentation. The non-targeted chemical analysis of musts and wines by FT-ICR-MS showed that the wines could be discriminated at the end of alcoholic fermentation as a function of adding SO2 or not, but also and above all as a function of phytosanitary protection, regardless of whether these fermentations took place in the presence of SO2 or not. Thus, the existence of signatures in wines of chemical diversity and microbiology linked to vineyard protection has been highlighted.
| S-EPMC5328833 | biostudies-literature
Project description:The objective of this work was to study the co-composting process of wastes from the winery and distillery industry with animal manures, using the classical chemical methods traditionally used in composting studies together with advanced instrumental methods (thermal analysis, FT-IR and CPMAS 13C NMR techniques), to evaluate the development of the process and the quality of the end-products obtained. For this, three piles were elaborated by the turning composting system, using as raw materials winery-distillery wastes (grape marc and exhausted grape marc) and animal manures (cattle manure and poultry manure). The classical analytical methods showed a suitable development of the process in all the piles, but these techniques were ineffective to study the humification process during the composting of this type of materials. However, their combination with the advanced instrumental techniques clearly provided more information regarding the turnover of the organic matter pools during the composting process of these materials. Thermal analysis allowed to estimate the degradability of the remaining material and to assess qualitatively the rate of OM stabilization and recalcitrant C in the compost samples, based on the energy required to achieve the same mass losses. FT-IR spectra mainly showed variations between piles and time of sampling in the bands associated to complex organic compounds (mainly at 1420 and 1540 cm-1) and to nitrate and inorganic components (at 875 and 1384 cm-1, respectively), indicating composted material stability and maturity; while CPMAS 13C NMR provided semi-quantitatively partition of C compounds and structures during the process, being especially interesting their variation to evaluate the biotransformation of each C pool, especially in the comparison of recalcitrant C vs labile C pools, such as Alkyl /O-Alkyl ratio.
| S-EPMC4587889 | biostudies-literature
Project description:Transferring wine is a common operation in most of the wineries in the world that depends mainly on the equipment and materials used. These contributions are widely unknown, and their knowledge is of vital importance to controlling the winemaking process. This work presents the results of characterizing the oxygen supply due to the use of hoses of different materials (Butyl Rubber, IIR; Nitrile Butadiene Rubber, NBR; Ethylene Propylene Diene Monomer rubber, EPDM; Ultra-high-molecular-weight polyethylene, UHMW; Natural Rubber, NR), dimensions (DN32; DN50), connectors (DIN 11851, Tri-CLAMP) with gaskets of different materials (NBR; EPDM; Fluorocarbon, FKM/FPM; silicone rubber, Q/VMQ; Polytetrafluoroethylene, PTFE). In addition, the use of different inert gases (N2, CO2, Ar, N2 + CO2 and Ar + CO2) for air purging of hoses and tanks, as well as for ullage blanketing during tank-to-tank racking, and their economic impact were studied. The results indicated that the IIR hoses had the least amount of O2 added to the liquid and that the Tri-clamp connectors were generally more airtight, with the FKM seals standing out. The most recommended inert gas was CO2 when the type of wine allows it, N2 being the most recommended in any case. When all these recommendations were used together the addition of O2 during tank-to-tank racking was drastically reduced.
| S-EPMC7916471 | biostudies-literature
Project description:The aim of this study was to investigate the influence of vine water status on bouquet typicality, revealed after aging, and the perception of three aromatic notes (mint, truffle, and undergrowth) in bottled fine red Bordeaux wines. To address the issue of the role of vine water deficit in the overall quality of fine aged wines, a large set of wines from four Bordeaux appellations were subjected to sensory analysis. As vine water status can be characterized by carbon isotope discrimination (δ13C), this ratio was quantified for each wine studied. Statistical analyses combining δ13C and sensory data highlighted that δ13C-values discriminated effectively between the most- and least-typical wines. In addition, Principal Component Analysis (PCA) revealed correlations between δ13C-values and truffle, undergrowth, and mint aromatic notes, three characteristics of the red Bordeaux wine aging bouquet. These correlations were confirmed to be significant using a Spearman statistical test. This study highlighted for the first time that vine water deficit positively relates to the perception of aging bouquet typicality, as well as the expression of its key aromatic nuances.
| S-EPMC5539364 | biostudies-other
Project description:In this study, the recovery of polyphenols from olive oil mill and winery waste was investigated. The performance of ultrasound assisted extraction (UAE), microwave assisted extraction (MAE), and pressurized liquid extraction (PLE) was assessed using ethanol-water mixtures, which are compatible with food, nutraceutical, and cosmetic applications. The extraction efficiency from olive pomace and lees samples was evaluated in terms of total polyphenol content (TPC), determined by high performance liquid chromatography (HPLC) and Folin-Ciocalteu assay. The effect of solvent composition, temperature, and time was analyzed by response surface methodology. Ethanol:water 50:50 (v/v) was found to be a suitable solvent mixture for both kinds of samples and all three extraction techniques. The performance of the extraction techniques was evaluated, under optimal experimental conditions, with a set of different representative samples of residues from olive oil and wine production. Overall, the best extraction efficiency for olive pomace residues was provided by MAE (ethanol:water 50:50 (v/v), 90 °C, 5 min), and for wine residues by PLE (ethanol:water 50:50 (v/v), 100 °C, 5 min, 1 cycle). However, the results provided by UAE (ethanol:water 50:50 (v/v), 30 min) were also suitable. Considering not only extraction performance, but also investment and operational costs, UAE is proposed for a future scaling up evaluation. Regarding olive pomace as a source for natural phenolic antioxidants, olive variety and climatic conditions should be taken into account, since both influence TPC in the extracts, while for winery residues, lees from red wines are more suitable than those from white wines.
| S-EPMC7694004 | biostudies-literature
Project description:Wine production is a complex process from the vineyard to the winery. On this journey, microbes play a decisive role. From the environment where the vines grow, encompassing soil, topography, weather and climate through to management practices in vineyards, the microbes present can potentially change the composition of wine. Introduction of grapes into the winery and the start of winemaking processes modify microbial communities further. Recent advances in next-generation sequencing (NGS) technology have progressed our understanding of microbial communities associated with grapes and fermentations. We now have a finer appreciation of microbial diversity across wine producing regions to begin to understand how diversity can contribute to wine quality and style characteristics. In this review, we highlight literature surrounding wine-related microorganisms and how these affect factors interact with and shape microbial communities and contribute to wine quality. By discussing the geography, climate and soil of environments and viticulture and winemaking practices, we claim microbial biogeography as a new perspective to impact wine quality and regionality. Depending on geospatial scales, habitats, and taxa, the microbial community respond to local conditions. We discuss the effect of a changing climate on local conditions and how this may alter microbial diversity and thus wine style. With increasing understanding of microbial diversity and their effects on wine fermentation, wine production can be optimised with enhancing the expression of regional characteristics by understanding and managing the microbes present.
| S-EPMC6880775 | biostudies-literature
Project description:Thiswork is focused on the development of sustainable biocomposites based on epoxy bioresin reinforced with a natural porous material (hydrochar, HC) that is the product of spruce bark wastes subjected to hydrothermal decomposition. To identify the influence of hydrochar as a reinforcing material on the designed composites, seven formulations were prepared and tested. An aromatic epoxy monomer derived from wood biomass was used to generate the polymeric matrix, and the formulations were prepared varying the filler concentration from 0 to 30 wt %. The reactivity of these formulations, together with the structural, thermal, and mechanical properties of bio-based resin and biocomposites, are investigated. Surprisingly, the reactivity study performed by differential scanning calorimetry (DSC) revealed that HC has a strong impact on polymerization, leading to an important increase in reaction enthalpy and to a decrease of temperature range. The Fourier Transform Infrared Spectroscopy (FT-IR) investigations confirmed the chemical bonding between the resin and the HC, while the dynamic mechanical analysis (DMA) showed increased values of crosslink density and of storage moduli in the biocomposites products compared to the neat bioresin. Thermogravimetric analysis (TGA) points out that the addition of hydrochar led to an improvement of the thermal stability of the biocomposites compared with the neat resorcinol diglycidyl ether (RDGE)-based resin (T5% = 337 °C) by ≈2-7 °C. Significantly, the biocomposites with 15-20 wt % hydrochar showed a higher stiffness value compared to neat epoxy resin, 92SD vs. 82SD, respectively.
| S-EPMC7828177 | biostudies-literature
Project description:This work studies, for the first time, the effect of the use of Cabernet Sauvignon vine-shoots as an enological additive (called "Shoot Enological Granule", SEG) in wines of the same variety. SEGs were added in two doses (12 and 24 g/L) at the end of malolactic fermentation, and after that, wines were bottled for six months. The phenolic and volatile composition and sensory profiles of wines were analyzed at bottling and after six months. The results showed a decrease in the total content of phenolic compounds with bottle time; however, stilbenes─specifically trans-resveratrol─were maintained at significant levels in SEG wines. In contrast, the total content of volatile compounds, mainly esters, increased with bottle aging. Finally, in terms of sensory profile, SEG wines showed a clear differentiation between the descriptors and the control, with more-integrated aromas after bottle time with more toasted, nutty vanilla notes, as well as silkier and less bitter tannins, compared to the control.
| S-EPMC10835714 | biostudies-literature
Project description:This study investigates the suitability of different lignocellulosic sources, namely eucalyptus, apple bagasse, and out-of-use wood, for injection into blast furnaces (BFs). While wastes possess carbon potential, their high moisture renders them unsuitable for direct energy utilization. Additionally, the P and K impurities, particularly in apple bagasse, can pose operational and product quality challenges in BF. Thus, different thermochemical processes were performed to convert raw biomass into a more suitable carbon fuel. Low-temperature carbonization was selected for eucalyptus, yielding a biochar with properties closer to the low-rank coal. Hydrothermal carbonization was chosen for apple bagasse and out-of-use wood, resulting in hydrochars with enhanced fuel characteristics and fewer adverse inorganic species but still limiting the amount in binary PCI blends. Thermogravimetry evaluated the cause-effect relationships between coal and coal- and bio-based chars during co-pyrolysis, co-combustion and CO2-gasification. No synergistic effects for char formation were observed, while biochars benefited ignition and reactivity during combustion at the programmed temperature. From heat-flow data in combustion, the high calorific values of the chars were well predicted. The CO2-gasification profiles of in situ chars revealed that lignin-rich hydrochars exhibited higher reactivity and conversion than those with a higher carbohydrate content, making them more suitable for gasification applications.
| S-EPMC10574071 | biostudies-literature