Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High-Performance Anti-freezing Flexible Zn-MnO₂ Battery Based on Polyacrylamide/Graphene Oxide/Ethylene Glycol Gel Electrolyte.

ABSTRACT: It remains a great challenge for aqueous zinc-ion batteries to work at subzero temperatures, since the water in aqueous electrolytes would freeze and inhibit the transportation of electrolyte ions, inevitably leading to performance deterioration. In this work, we propose an anti-freezing gel electrolyte that contains polyacrylamide, graphene oxide, and ethylene glycol. The graphene oxide can not only enhance the mechanical properties of gel electrolyte but also help construct a three-dimensional macroporous network that facilitates ionic transport, while the ethylene glycol can improve freezing resistance. Due to the synergistic effect, the gel electrolyte exhibits high ionic conductivity (e.g., 14.9 mS cm^-1 at -20 °C) and good mechanical properties in comparison with neat polyacrylamide gel electrolyte. Benefiting from that, the assembled flexible quasi-solid-state Zn-MnO₂ battery exhibits good electrochemical durability and superior tolerance to extreme working conditions. This work provides new perspectives to develop flexible electrochemical energy storage devices with great environmental adaptability.

SUBMITTER: Quan Y

PROVIDER: S-EPMC7411301 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Inkjet-printed flexible planar Zn-MnO2 battery on paper substrate.

Project description:Energy storage devices (ESD) which are intended to power electronic devices, used in close contact of human skin, are desirable to be safe and non-toxic. In light of this requirement, Zn based energy storage devices seem to provide a viable pathway as they mostly employ aqueous based electrolytes which are safe and non-toxic in their functioning. Additionally, having a flexible ESD will play a crucial role as it will enable the ESD to conform to the varying shapes and sizes of wearable electronics which they energize. In this work, we have developed an inkjet-printed Zinc ion battery (IPZIB) with planar electrode configuration over bond paper substrate. Zn has been used as the negative electrode, MnO2 is used as the positive electrode with Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active binder. Conducting tracks of reduced graphene oxide (rGO) are used to construct the current collector on the paper substrate. The fabricated IPZIB delivered a high discharge capacity of 300.14 mAh g-1 at a current density of 200 mA g-1. The energy density of the IPZIB is observed as 330.15 Wh kg-1 at a power density of 220 W kg-1 and retains an energy density of 94.36 Wh kg-1 at a high power density of 1650 W kg-1. Finally, we have demonstrated the capability of the IPZIB to power a LED at various bending and folding conditions which indicates its potential to be used in the next generation flexible and wearable electronic devices.

| S-EPMC10796916 | biostudies-literature

Wearable and Washable MnO2-Zn Battery Packaged by Vacuum Sealing.

Project description:Batteries are used in all types of electronic devices from conventional to advanced devices. Currently, batteries are evolving in the direction of extremely personalized yarn- or textile-structured textronic systems. However, the absence of a protective layer on such batteries is a critical limitation to their practical use. In this study, we developed a wearable and washable MnO2-Zn textile battery that maintains its electrochemical capacity under various external environmental conditions through a vacuum-sealed packaging. The packaged textile battery was fabricated by vacuuming a polymer envelope containing the battery, followed by heat sealing with a vacuum packaging machine. The interior and exterior regions of the textile battery are completely separated by the packaging sheath to preclude leakage and intrusion of substances. The resulting packaged textile battery exhibits stable capacity retention performance under varying temperature and humidity; mechanical deformations due to bending, twisting, rubbing, and pressing; and several mechanical, chemical, and their combined washing cycles. On the basis of these demonstrations, we expect that our vacuum-packaged textile battery will offer new possibilities for practical and convenient use of textronics.

| S-EPMC9864546 | biostudies-literature

An Artificial MnWO4 Cathode Electrolyte Interphase Enabling Enhanced Electrochemical Performance of δ-MnO2 Cathode for Aqueous Zinc Ion Battery.

Project description:The dissolution of active material in aqueous batteries can lead to a rapid deterioration in capacity, and the presence of free water can also accelerate the dissolution and trigger some side reactions that affect the service life of aqueous batteries. In this study, a MnWO4 cathode electrolyte interphase (CEI) layer is constructed on a δ-MnO2 cathode by cyclic voltammetry, which is effective in inhibiting the dissolution of Mn and improving the reaction kinetics. As a result, the CEI layer enables the δ-MnO2 cathode to produce a better cycling performance, with the capacity maintained at 98.2% (vs. activated capacity at 500 cycles) after 2000 cycles at 10 A g-1. In comparison, the capacity retention rate is merely 33.4% for pristine samples in the same state, indicating that this MnWO4 CEI layer constructed by using a simple and general electrochemical method can promote the development of MnO2 cathodes for aqueous zinc ion batteries.

| S-EPMC10141966 | biostudies-literature

High-Capacity and Long-Lifespan Aqueous LiV3O8/Zn Battery Using Zn/Li Hybrid Electrolyte.

Project description:Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale energy storage because of their low cost and high safety. However, their practical applications are impeded by low energy density and short service life. Here, an aqueous Zn2+/Li+ hybrid-ion battery is fabricated using the LiV3O8 nanorods as the cathode, metallic Zn as the anode, and 3 M Zn(OTf)2 + 0.5 M LiOTf aqueous solution as the electrolyte. Compared with the batteries using pure 3 M Zn(OTf)2 electrolyte, the cycle performance of the hybrid-ion battery is significantly improved. After 4000 cycles at 5 A g1, the remaining capacity is 163.9 mA h g-1 with impressive capacity retention of 87.0%. Ex-situ XRD, ex-situ XPS, and SEM tests demonstrate that the hybrid electrolyte can inhibit the formation of the irreversible Zn3(OH)2V2O7·2H2O by-product and restrict Zn dendrite growth during cycling, thereby improving the cycle performance of the batteries.

| S-EPMC8229935 | biostudies-literature

Rescue of dead MnO2 for stable electrolytic Zn-Mn redox-flow battery: a metric of mediated and catalytic kinetics.

Project description:The virtues of electrolytic MnO2 aqueous batteries are high theoretical energy density, affordability and safety. However, the continuous dead MnO2 and unstable Mn2+/MnO2 electrolysis pose challenges to the practical output energy and lifespan. Herein, we demonstrate bifunctional cationic redox mediation and catalysis kinetics metrics to rescue dead MnO2 and construct a stable and fast electrolytic Zn-Mn redox-flow battery (eZMRFB). Spectroscopic characterizations and electrochemical evaluation reveal the superior mediation kinetics of a cationic Fe2+ redox mediator compared with the anionic ones (e.g. I- and Br-), thus eliminating dead MnO2 effectively. With intensified oxygen vacancies, density functional theory simulations of the reaction pathways further verify the concomitant Fe-catalysed Mn2+/MnO2 electrolysis kinetics via charge delocalization and activated O 2p electron states, boosting its rate capability. As a result, the elaborated eZMRFB achieves a coulombic efficiency of nearly 100%, ultra-high areal capacity of 80 mAh cm-2, rate capability of 20 C and a long lifespan of 2500 cycles. This work may advance high-energy aqueous batteries to next-generation scalable energy storage.

| S-EPMC11312367 | biostudies-literature

Use of Hydrogel Electrolyte in Zn-MnO2 Rechargeable Batteries: Characterization of Safety, Performance, and Cu2+ Ion Diffusion.

Project description:Achieving commercially acceptable Zn-MnO2 rechargeable batteries depends on the reversibility of active zinc and manganese materials, and avoiding side reactions during the second electron reaction of MnO2. Typically, liquid electrolytes such as potassium hydroxide (KOH) are used for Zn-MnO2 rechargeable batteries. However, it is known that using liquid electrolytes causes the formation of electrochemically inactive materials, such as precipitation Mn3O4 or ZnMn2O4 resulting from the uncontrollable reaction of Mn3+ dissolved species with zincate ions. In this paper, hydrogel electrolytes are tested for MnO2 electrodes undergoing two-electron cycling. Improved cell safety is achieved because the hydrogel electrolyte is non-spillable, according to standards from the US Department of Transportation (DOT). The cycling of "half cells" with advanced-formulation MnO2 cathodes paired with commercial NiOOH electrodes is tested with hydrogel and a normal electrolyte, to detect changes to the zincate crossover and reaction from anode to cathode. These half cells achieved ≥700 cycles with 99% coulombic efficiency and 63% energy efficiency at C/3 rates based on the second electron capacity of MnO2. Other cycling tests with "full cells" of Zn anodes with the same MnO2 cathodes achieved ~300 cycles until reaching 50% capacity fade, a comparable performance to cells using liquid electrolyte. Electrodes dissected after cycling showed that the liquid electrolyte allowed Cu ions to migrate more than the hydrogel electrolyte. However, measurements of the Cu diffusion coefficient showed no difference between liquid and gel electrolytes; thus, it was hypothesized that the gel electrolytes reduced the occurrence of Cu short circuits by either (a) reducing electrode physical contact to the separator or (b) reducing electro-convective electrolyte transport that may be as important as diffusive transport.

| S-EPMC10934817 | biostudies-literature

A biocompatible electrolyte enables highly reversible Zn anode for zinc ion battery.

Project description:Progress towards the integration of technology into living organisms requires power devices that are biocompatible and mechanically flexible. Aqueous zinc ion batteries that use hydrogel biomaterials as electrolytes have emerged as a potential solution that operates within biological constraints; however, most of these batteries feature inferior electrochemical properties. Here, we propose a biocompatible hydrogel electrolyte by utilising hyaluronic acid, which contains ample hydrophilic functional groups. The gel-based electrolyte offers excellent anti-corrosion ability for zinc anodes and regulates zinc nucleation/growth. Also, the gel electrolyte provides high battery performance, including a 99.71% Coulombic efficiency, over 5500 hours of long-term stability, improved cycle life of 250 hours under a high zinc utilization rate of 80%, and high biocompatibility. Importantly, the Zn//LiMn2O4 pouch cell exhibits 82% capacity retention after 1000 cycles at 3 C. This work presents a promising gel chemistry that controls zinc behaviour, offering great potential in biocompatible energy-related applications and beyond.

| S-EPMC10579325 | biostudies-literature

Zn salts incorporated polyurethane/polyacrylonitrile electrospinning fiber membrane for high porosity polymer electrolyte in Zn ion battery.

Project description:So far, a large variety of polymer molecule architectures have been explored in the electrolyte field. Polymer electrolytes have gathered research efforts as an interesting alternative to conventional liquid electrolytes due to their advantages of low probability of leakage and low volatility of liquid solvent, lightweight, flexibility, inertness, high durability, and thermal stability. In this work, a polymer electrolyte developed from a polyurethane/polyacrylonitrile (PU/PAN) electrospinning fiber membrane was added with different zinc (Zn) salts, namely, Zn(CH3CO2)2, ZnSO4, and Zn(OTf)2. The samples with the Zn salt presented many different properties; especially, the high Zn(OTf)2 sample showed gradually bundle morphology in its structure. Characterization revealed improved properties in contact angle, water uptake, and thermal resistance. Namely, the 15 wt% Zn(OTf)2) sample exhibited an outstandingly high ionic conductivity of 3.671 mS cm-1, which is 10 times higher than that of the neat PU/PAN membrane.

| S-EPMC10556048 | biostudies-literature

A Highly Flexible Supercapacitor Based on MnO?/RGO Nanosheets and Bacterial Cellulose-Filled Gel Electrolyte.

Project description:The flexible supercapacitors (SCs) of the conventional sandwich-type structure have poor flexibility due to the large thickness of the final entire device. Herein, we have fabricated a highly flexible asymmetric SC using manganese dioxide (MnO?) and reduced graphene oxide (RGO) nanosheet-piled hydrogel films and a novel bacterial cellulose (BC)-filled polyacrylic acid sodium salt-Na?SO? (BC/PAAS-Na?SO?) neutral gel electrolyte. Apart from being environmentally friendly, this BC/PAAS-Na?SO? gel electrolyte has high viscosity and a sticky property, which enables it to combine two electrodes together. Meanwhile, the intertangling of the filled BC in the gel electrolyte hinders the decrease of the viscosity with temperature, and forms a separator to prevent the two electrodes from short-circuiting. Using these materials, the total thickness of the fabricated device does not exceed 120 ?m. This SC device demonstrates high flexibility, where bending and even rolling have no obvious effect on the electrochemical performance. In addition, owing to the asymmetric configuration, the cell voltage of this flexible SC has been extended to 1.8 V, and the energy density can reach up to 11.7 Wh kg-1 at the power density of 441 W kg-1. This SC also exhibits a good cycling stability, with a capacitance retention of 85.5% over 5000 cycles.

| S-EPMC5706198 | biostudies-literature

Unravelling the Mechanism of Rechargeable Aqueous Zn-MnO2 Batteries: Implementation of Charging Process by Electrodeposition of MnO2.

Project description:Poor cycling stability and mechanistic controversies have hindered the wider application of rechargeable aqueous Zn-MnO2 batteries. Herein, direct evidence was provided of the importance of Mn2+ in this type of battery by using a bespoke cell. Without pre-addition of Mn2+ , the cell exhibited an abnormal discharge-charge profile, meaning it functioned as a primary battery. By adjusting the Mn2+ content in the electrolyte, the cell recovered its charging ability through electrodeposition of MnO2 . Additionally, a dynamic pH variation was observed during the discharge-charge process, with a precipitation of Zn4 (OH)6 (SO4 )⋅5H2 O buffering the pH of the electrolyte. Contrary to the conventional Zn2+ intercalation mechanism, MnO2 was first converted into MnOOH, which reverted to MnO2 through disproportionation, resulting in the dissolution of Mn2+ . The charging process occurred by the electrodeposition of MnO2 , thus improving the reversibility through the availability of Mn2+ ions in the solution.

| S-EPMC7496518 | biostudies-literature