Dataset Information

Functionalized Wool as an Efficient and Sustainable Adsorbent for Removal of Zn(II) from an Aqueous Solution.

ABSTRACT: In this paper, the aim of the research was to obtain a highly efficient wool-based sorbent for the removal of zinc Zn(II) from wastewater. To increase the functional groups for metal binding, the wool was functionalized with chitosan. Chitosan has amino groups through which metals can be complexed easily to chelates. The physical and chemical modification of chitosan on wool was performed to analyze the influence of the coating bond on the final ability of the wool to remove metals. The presence of functional chitosan groups onto wool after adsorption was verified by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FT-IR) spectra. The effective binding of chitosan to wool was also determined by potentiometric and polyelectrolyte titration methods. The latter titration was used to analyze the chitosan desorption. The main part of the study was the sorption of Zn(II) on natural and functionalized wool. The influence was investigated as a function of contact time, pH, metal ion concentration and temperature on the sorption process. The absorbent with the highest concentration of protonated amino groups (607.7 mmol/kg) and responding sorption capacity of 1.52 mg/g was obtained with wool physically modified by a macromolecular chitosan solution (1%) at pH = 7. Adsorption of Zn(II) onto pristine and modified wool corresponded to pseudo-second order kinetics (R2 > 0.9884). The Langmuir model was found to be more suitable (R2 > 0.9866) in comparison to the Freundlich model. The Zn(II) sorption process was spontaneous (?G < 0) and exothermic (?H < 0). The results found in this study are significant for escalating the possible use of wool modified with polysaccharide coatings as a sustainable source to improve or increase the metal sorption activity of wool.

SUBMITTER: Simonic M

PROVIDER: S-EPMC7411615 | biostudies-literature | 2020 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Functionalized Wool as an Efficient and Sustainable Adsorbent for Removal of Zn(II) from an Aqueous Solution.

Simonič Marjana M Fras Zemljič Lidija L

Materials (Basel, Switzerland) 20200718 14

In this paper, the aim of the research was to obtain a highly efficient wool-based sorbent for the removal of zinc Zn(II) from wastewater. To increase the functional groups for metal binding, the wool was functionalized with chitosan. Chitosan has amino groups through which metals can be complexed easily to chelates. The physical and chemical modification of chitosan on wool was performed to analyze the influence of the coating bond on the final ability of the wool to remove metals. The presence ...[more]

PMID: 32708467

Similar Datasets

Project description:Magnetic nanoparticles owing to their superparamagnetic behaviour and specific reactive sites are facilitated to regenerate and reuse. Our present study determines the cointegration of the plant extracts of Cynodon dactylon and Muraya koenigii with the magnetic nanoparticle coated with silica layer and surface engineered with a specific amine group. The cointegrated magnetic nano adsorbent is characterized for its analytical feature and batch studies are performed to remove zinc (Zn2+) copper (Cu2+) metal ions. Fourier transform infrared spectroscopy reveals the presence of functional entities such as NH2, Si-O-Si, C=C. The size of the cointegrated nano adsorbent (12-30 nm) was confirmed by field emission scanning electron microscopy whereas, a high-resolution transmission electron microscope affirms the nanosize of the particle constituted around 20 nm. Energy dispersive x-ray analysis confirms the presence of elements like Fe, N, Si and was confirmed by X-ray diffraction analysis and vibrating sample magnetometer affirms the superparamagnetic nature with the high magnetic saturation value (Ms - 30 emug-1). The cointegrated nano adsorbent reveals the maximum adsorption capacity of Zn2+ as 78.24 mg.g-1 and Cu2+ as 81.76 mg.g-1 of the adsorbent under the optimized conditions of contact time 45 min, pH 6.0 and temperature 35 °C. Kinetics such as pseudo-first-order, pseudo-second-order, Elovich, intraparticle diffusion and isotherm studies like Langmuir, Freundlich, Dubinin-Radushkevich and Temkin were performed to understand the mechanism of interaction between the nanoadsorbent and metal ions. The reaction system follows the pseudo-second-order kinetics and Langmuir isotherm model for both the Cu2+ and Zn2+ metal ions. To determine the reusing capacity of the cointegrated nanoadsorbent, the adsorption efficiency was studied for continuous twelve cycles with 80% recovery after subsequent acid treatment.Supplementary informationThe online version contains supplementary material available at 10.1007/s40201-021-00696-9.

Project description:The treatment of wastewater containing heavy metals and the utilization of wool waste are very important for the sustainable development of textile mills. In this study, the wool keratin modified magnetite (Fe3O4) powders were fabricated by using wool waste via a co-precipitation technique for removal of Cu2+ ions from aqueous solutions. The morphology, chemical compositions, crystal structure, microstructure, magnetism properties, organic content, and specific surface area of as-fabricated powders were systematically characterized by various techniques including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), thermogravimetric (TG) analysis, and Brunauer-Emmett-Teller (BET) surface area analyzer. The effects of experimental parameters such as the volume of wool keratin hydrolysate, the dosage of powder, the initial Cu2+ ion concentration, and the pH value of solution on the adsorption capacity of Cu2+ ions by the powders were examined. The experimental results indicated that the Cu2+ ion adsorption performance of the wool keratin modified Fe3O4 powders exhibited much better than that of the chitosan modified ones with a maximum Cu2+ adsorption capacity of 27.4 mg/g under favorable conditions (0.05 g powders; 50 mL of 40 mg/L CuSO4; pH 5; temperature 293 K). The high adsorption capacity towards Cu2+ ions on the wool keratin modified Fe3O4 powders was primarily because of the strong surface complexation of -COOH and -NH2 functional groups of wool keratins with Cu2+ ions. The Cu2+ ion adsorption process on the wool keratin modified Fe3O4 powders followed the Temkin adsorption isotherm model and the intraparticle diffusion and pseudo-second-order adsorption kinetic models. After Cu2+ ion removal, the wool keratin modified Fe3O4 powders were easily separated using a magnet from aqueous solution and efficiently regenerated using 0.5 M ethylene diamine tetraacetic acid (EDTA)-H2SO4 eluting. The wool keratin modified Fe3O4 powders possessed good regenerative performance after five cycles. This study provided a feasible way to utilize waste wool textiles for preparing magnetic biomass-based adsorbents for the removal of heavy metal ions from aqueous solutions.

Dataset Information

Functionalized Wool as an Efficient and Sustainable Adsorbent for Removal of Zn(II) from an Aqueous Solution.

Publications

Functionalized Wool as an Efficient and Sustainable Adsorbent for Removal of Zn(II) from an Aqueous Solution.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets