Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Lignans in Knotwood of Norway Spruce: Localisation with Soft X-ray Microscopy and Scanning Transmission Electron Microscopy with Energy Dispersive X-ray Spectroscopy.

ABSTRACT: Lignans are bioactive compounds that are especially abundant in the Norway spruce (Picea abies L. Karst.) knotwood. By combining a variety of chromatographic, spectroscopic and imaging techniques, we were able to quantify, qualify and localise the easily extractable lignans in the xylem tissue. The knotwood samples contained 15 different lignans according to the gas chromatography-mass spectrometry analysis. They comprised 16% of the knotwood dry weight and 82% of the acetone extract. The main lignans were found to be hydroxymatairesinols HMR1 and HMR2. Cryosectioned and resin-embedded ultrathin sections of the knotwood were analysed with scanning transmission X-ray microscopy (STXM). Cryosectioning was found to retain only lignan residues inside the cell lumina. In the resin-embedded samples, lignan was interpreted to be unevenly distributed inside the cell lumina, and partially confined in deposits which were either readily present in the lumina or formed when OsO4 used in staining reacted with the lignans. Furthermore, the multi-technique characterisation enabled us to obtain information on the chemical composition of the structural components of knotwood. A simple spectral analysis of the STXM data gave consistent results with the gas chromatographic methods about the relative amounts of cell wall components (lignin and polysaccharides). The STXM analysis also indicated that a torus of a bordered pit contained aromatic compounds, possibly lignin.

SUBMITTER: Mansikkala T

PROVIDER: S-EPMC7411943 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Complex Aerosol Characterization by Scanning Electron Microscopy Coupled with Energy Dispersive X-ray Spectroscopy.

Project description:Particulate matter (PM) air pollution is a central concern for public health. Current legislation relies on a mass concentration basis, despite broad acceptance that mass alone is insufficient to capture the complexity and toxicity of airborne PM, calling for additional and more comprehensive measurement techniques. We study to what extent scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDS) can be applied for physicochemical characterization of complex aerosols, and investigate its potential for separating particle properties on a single particle basis, even for nanosized particles. SEM/EDS analysis is performed on impactor samples of laboratory generated aerosols, consisting of either NaCl, Halloysite fibers, soot-like Printex90 agglomerates, or their combination. The analysis is automated and performed as EDS maps, covering a statistically relevant number of particles, with analysis times of approximately one hour/sample. Derived size distributions are compared to scanning mobility particle sizer (SMPS) and electric low-pressure impactor (ELPI) results. A method is presented to estimate airborne number concentrations and size distributions directly from SEM results, within a factor 10 of SMPS and ELPI outcomes. A classification scheme is developed based on elemental composition, providing class-specific information with individual particle statistics on shape, size, and mixing state. This can identify primary particles for source apportionment and enables easy distinction between fibrous and dense particle classes, e.g. for targeted risk assessments. Overall, the SEM/EDS analysis provides a more detailed physicochemical characterization of PM than online measurements, e.g. SMPS and ELPI. The method has the potential to improve assessments of PM exposure and risk, and facilitates source identification, even without prior knowledge at sampling.

| S-EPMC7272469 | biostudies-literature

Application of Scanning Electron Microscopy With Energy-Dispersive X-Ray Spectroscopy for Analyzing Ocular Surface Particles on Schirmer Strips.

Project description:To demonstrate the application of scanning electron microscopy with energy-dispersive x-ray spectroscopy (SEM/EDS) for analyzing Schirmer strips for particle concentration, size, morphology, and type distribution.A cross-sectional design was used. Patients were prospectively recruited from the Miami Veterans Affairs (VA) Healthcare System eye clinic, and they underwent a complete ocular surface examination. The size, type, and chemical composition of particulate matter on Schirmer strips (from the left eye) were analyzed using SEM/EDS.Schirmer strips from all 6 patients showed particle loading, ranging from 1 to 33 particles, whereas the blank Schirmer strip that served as a control showed no particle loading. Most particles were coarse, with an average size of 19.7 ?m (95% confidence interval 15-24.4 ?m). All samples contained organic particles (eg, pollen and mold), and 5 of the 6 samples contained nonorganic particles. The nonorganic particles were composed of silicon, minerals, and metals, including gold and titanium. The size of aluminum and iron particles was ?62 ?m, whereas the size of 2 other metals, zinc and gold, was smaller, that is, <20 ?m. Most metal particles were elongated compared with the organic particles, which were round.Although SEM/EDS has been extensively used in biomedical research, its novel application to assess the size, morphology, and chemical composition of the ocular surface particles offers an unprecedented opportunity to tease out the role of particulate matter exposure in ocular surface disease and disorders.

| S-EPMC5419879 | biostudies-literature

Predictive Model of Nail Consistency Using Scanning Electron Microscopy with Energy-Dispersive X-Ray.

Project description:The nail plate is made up of tightly packed keratin-rich cells. Factors such as the special distribution of the intermediate filaments in each layer (dorsal, intermediate, and ventral), the relative thickness of the layers, and their chemical composition define the characteristics of each nail. The main objective of this study is to determine nail consistency by calculating a predictive model based on elemental composition analysis using scanning electron microscopy. Nail consistency was determined in 57 participants (29 women and 28 men) in two age groups (young people and adults). Elemental composition was analysed in each layer using scanning SEM-EDS, and nail plate thickness was measured by image analysis. A total of 12 elements were detected in nail plates, of which carbon, nitrogen, phosphorus, sulphur, and calcium showed significant differences between layers (p-values ? 0.01). The level of calcium in the dorsal layer was the main predictive variable in calculating the predictive model of consistency, with 75.4% correctly classified cases. Elemental analysis in each layer of the nail plate by SEM-EDS can be used to develop a predictive model of nail consistency that will help health professionals to objectively determine nail consistency.

| S-EPMC7828269 | biostudies-literature

Respirable silica particles in coal mine dust: An image library dataset collected using scanning electron microscopy with energy dispersive X-ray spectroscopy

Project description: Not available

| S-EPMC10577047 | biostudies-literature

Soft X-ray characterization of halide perovskite film by scanning transmission X-ray microscopy.

Project description:Organic-inorganic metal halide perovskites (MHPs) have recently been receiving a lot of attention due to their newfound application in optoelectronic devices, including perovskite solar cells (PSCs) which have reached power conversion efficiencies as high as 25.5%. However, the fundamental mechanisms in PSCs, including the correlation of degradation with the excellent optoelectrical properties of the perovskite absorbers, are poorly understood. In this paper, we have explored synchrotron-based soft X-ray characterization as an effective technique for the compositional analysis of MHP thin films. Most synchrotron-based studies used for investigating MHPs so far are based on hard X-rays (5-10 keV) which include various absorption edges (Pb L-edge, I L-edge, Br K-edge, etc.) but are not suited for the analysis of the organic component in these materials. In order to be sensitive to a maximum number of elements, we have employed soft X-ray-based scanning transmission X-ray microscopy (STXM) as a spectro-microscopy technique for the characterization of MHPs. We examined its sensitivity to iodine and organic components, aging, or oxidation by-products in MHPs to make sure that our suggested method is suitable for studying MHPs. Furthermore, methylammonium triiodide with different deposition ratios of PbI2 and CH3NH3I (MAI), and different thicknesses, were characterized for chemical inhomogeneity at the nanoscale by STXM. Through these measurements, we demonstrate that STXM is very sensitive to chemical composition and homogeneity in MHPs. Thus, we highlight the utility of STXM for an in-depth analysis of physical and chemical phenomena in PSCs.

| S-EPMC8927596 | biostudies-literature

Lignans Extract from Knotwood of Norway Spruce-A Possible New Weapon against GTDs.

Project description:Grapevine trunk diseases (GTDs) pose a major threat to the wine industry worldwide. Currently, efficient biological methods or chemical compounds are not available for the treatment of infected grapevines. In the present study, we used an extract from the knotwood of spruce trees as a biological control against GTDs. Our in vitro trial was focused on the antifungal effects of the extract against the most common GTD pathogens-Cadophora luteo-olivacea, Dactylonectria torresensis, Diaporthe ampelina, Diaporthe bohemiae, Diplodia seriata, Eutypa lata, and Phaeoacremonium minimum. Our in vitro trial revealed a high antifungal effect of the extract against all tested fungi. The inhibition rates varied among the different species from 30% to 100% using 1 mg·mL-1 extract. Subsequently, the efficiency of the extract was supported by an in planta experiment. Commercial grafts of Vitis vinifera were treated with the extract and planted. The total genomic DNA of grapevines was extracted 10 days and 180 days after the treatment. The fungal microbial diversities of the treated/untreated plants were compared using high-throughput amplicon sequencing (HTAS). Treated plants showed 76.9% lower relative abundance of the genus Diaporthe and 70% lower relative abundance of the genus Phaeoacremonium 10 days after treatment. A similar scenario was observed for the genus Cadophora 180 days after treatment, where treated plants showed 76% lower relative abundance of this genus compared with untreated grapevines.

| S-EPMC9025846 | biostudies-literature

A preliminary investigation into bacterial viability using scanning electron microscopy-energy-dispersive X-ray analysis: The case of antibiotics.

Project description:The metabolic stages of bacterial development and viability under different stress conditions induced by disinfection, chemical treatments, temperature, or atmospheric changes have been thoroughly investigated. Here, we aim to evaluate early metabolic modifications in bacteria following induced stress, resulting in alterations to bacterial metabolism. A protocol was optimized for bacterial preparation using energy-dispersive X-ray (EDX) microanalysis coupled with scanning electron microscopy (SEM), followed by optimizing EDX data acquisition and analysis. We investigated different preparation methods aiming to detect modifications in the bacterial chemical composition at different states. We first investigated Escherichia coli, acquiring data from fresh bacteria, after heat shock, and after contact with 70% ethanol, in order to prove the feasibility of this new strategy. We then applied the new method to different bacterial species following 1 h of incubation with increasing doses of antibiotics used as a stress-inducing agent. Among the different materials tested aiming to avoiding interaction with bacterial metabolites, phosphorous-doped silicon wafers were selected for the slide preparation. The 15 kV acceleration voltage ensured all the chemical elements of interest were excited. A thick layer of bacterial culture was deposited on the silicon wafer providing information from multiple cells and intra-cellular composition. The EDX spectra of fresh, heat-killed, and alcohol-killed E. coli revealed important modifications in magnesium, potassium, and sodium. Those same alterations were detected when applying this strategy to bacteria exposed to antibiotics. Tests based on SEM-EDX acquisition systems would provide early predictions of the bacterial viability state in different conditions, yielding earlier results than culture.

| S-EPMC9393632 | biostudies-literature

Confocal soft X-ray scanning transmission microscopy: setup, alignment procedure and limitations.

Project description:Zone-plate-based scanning transmission soft X-ray microspectroscopy (STXM) is a well established technique for high-contrast imaging of sufficiently transparent specimens (e.g. ultrathin biological tissues, polymer materials, archaeometric specimens or magnetic thin films) with spatial resolutions in the regime of 20 nm and high spectroscopic or chemical sensitivity. However, due to the relatively large depth of focus of zone plates, the resolution of STXM along the optical axis so far stays unambiguously behind for thicker X-ray transparent specimens. This challenge can be addressed by the implementation of a second zone plate in the detection pathway of the beam, resulting in a confocal arrangement. Within this paper a first proof-of-principle study for a confocal STXM (cSTXM) and an elaborate alignment procedure in transmission and fluorescence geometry are presented. Based on first confocal soft X-ray micrographs of well known specimens, the advantage and limitation of cSTXM as well as further development potentials for future applications are discussed.

| S-EPMC4785861 | biostudies-other

Combined Use of Scanning Electron Microscopy-Energy-Dispersive X-ray Spectroscopy and Fourier Transform Infrared Imaging Coupled with Principal Component Analysis in the Study of Ancient Egyptian Papyri.

Project description:This paper reports the results of a spectroscopic study on the chemistry of some small papyrus fragments arising from three Egyptian excavation sites. The aim of this investigation was to verify the possibility to identify significant differences in ancient Egyptian papyri using noninvasive analytical methods, that is, ATR (attenuated total reflection)-FTIR (Fourier transform infrared) spectroscopic imaging and scanning electron microscopy-energy-dispersive X-ray spectroscopy. Differences in both lignin and cellulose compositions, which are difficult to detect with traditional FTIR and FTIR imaging spectral analysis, were revealed by the multivariate approach, and the second derivative spectroscopy was applied to enhance the spectrum resolution. Thus, it has been possible to recognize a fragment characterized by the presence of lead and of long chain aliphatic organic compound, which are not present in the other fragments, in the ink region. These data show not only that the combination of these techniques can provide important chemical information, such as to evidence the different compositions and manufacture of each papyrus, but also that metal inks were probably used also in ancient Egyptian papyri.

| S-EPMC6933776 | biostudies-literature