Dataset Information

Bioaerosol sampling of patients with suspected pulmonary tuberculosis: a study protocol.

ABSTRACT: BACKGROUND:Tuberculosis (TB) is transmitted in bioaerosols containing Mycobacterium tuberculosis (Mtb). Despite being central to ongoing TB transmission, no routine diagnostic assay exists to measure Mtb in bioaerosols. Furthermore, published studies of Mtb in bioaerosol samples have been limited to individuals with sputum-positive pulmonary TB. Notably, TB diagnosis is based on clinical symptoms and sputum laboratory findings. This is despite the fact that approximately half of all patients commencing TB treatment are sputum-negative, resulting in a high proportion of presumptive treatments. Here, we propose to use a sensitive air sampling protocol to investigate the prevalence of Mtb-containing bioaerosols in both sputum-positive and sputum-negative TB suspects, at the same time evaluating the potential to identify unrecognized transmitters of TB. METHODS:Our parallel-group design will identify viable Mtb in bioaerosols produced by individuals attending a TB clinic in South Africa. Sampling will be performed on eligible individuals presenting with symptoms indicative of TB and repeated at 14?days if initially positive. Participants will be prospectively classified into three distinct groups based on National TB Control Program (NTBCP) criteria: Group A, TB notification with sputum-based laboratory confirmation; Group B, TB notification with empiric diagnosis; and Group C, individuals not notified. Group C individuals with detectable Mtb bioaerosol will be monitored until resolution of clinical and laboratory status. Collection of bioaerosol specimens will be via two consecutive sampling modalities: (1) direct sampling following a specific respiratory manoeuvre; and (2) indirect sampling during passive respiratory activity. Bioaerosol specimens will be analyzed for viable Mtb using DMN-trehalose staining and live-cell fluorescence microscopy. Mtb genomes and mycobacterial and host lipids will be detected using droplet digital PCR and mass spectrometry analyses, respectively. The primary objective is to determine the prevalence of Mtb bioaerosols in all TB clinic attendees and in each of the groups. Secondary objectives are to investigate differences in prevalence of Mtb bioaerosol by HIV status and current isoniazid preventive therapy (IPT) use; we will also determine the impact of anti-TB chemotherapy on Mtb-containing bioaerosol production. DISCUSSION:Respiratory bioaerosol has a potential role in non-invasive TB diagnosis, infectivity measurement and treatment monitoring. TRIAL REGISTRATION:ClinicalTrials.gov: NCT04241809 . Date of Registration: 27/1/2020.

SUBMITTER: Patterson B

PROVIDER: S-EPMC7414552 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Bioaerosol sampling of patients with suspected pulmonary tuberculosis: a study protocol.

Patterson Benjamin B Koch Anastasia A Gessner Sophia S Dinkele Ryan R Gqada Melitta M Bryden Wayne W Cobelens Frank F Little Francesca F Warner Digby F DF Wood Robin R

BMC infectious diseases 20200808 1

<h4>Background</h4>Tuberculosis (TB) is transmitted in bioaerosols containing Mycobacterium tuberculosis (Mtb). Despite being central to ongoing TB transmission, no routine diagnostic assay exists to measure Mtb in bioaerosols. Furthermore, published studies of Mtb in bioaerosol samples have been limited to individuals with sputum-positive pulmonary TB. Notably, TB diagnosis is based on clinical symptoms and sputum laboratory findings. This is despite the fact that approximately half of all pati ...[more]

PMID: 32770954

Similar Datasets

Project description:IntroductionDetection of Mycobacterium tuberculosis (Mtb) in patient-derived bioaerosol is a potential tool to measure source case infectiousness. However, current bioaerosol sampling approaches have reported low detection yields in sputum-positive TB cases. To increase the utility of bioaerosol sampling, we present advances in bioaerosol collection and Mtb identification that improve detection yields.MethodsA previously described Respiratory Aerosol Sampling Chamber (RASC) protocol, or "RASC-1", was modified to incorporate liquid collection of bioaerosol using a high-flow wet-walled cyclone (RASC-2). Individuals with GeneXpert-positive pulmonary TB were sampled pre-treatment over 60-minutes. Putative Mtb bacilli were detected in collected fluid by fluorescence microscopy utilising DMN-Trehalose. Exhaled air and bioaerosol volumes were estimated using continuous CO2 monitoring and airborne particle counting, respectively. Mtb capture was calculated per exhaled air volume sampled and bioaerosol volume for RASC-1 (n = 35) and for RASC-2 (n = 21). Empty chamber samples were collected between patients as controls.ResultsThe optimised RASC-2 protocol sampled a median of 258.4L (IQR: 226.9-273.6) of exhaled air per patient compared with 27.5L (IQR: 23.6-30.3) for RASC-1 (p<0.0001). Bioaerosol volume collection was estimated at 2.3nL (IQR: 1.1-3.6) for RASC-2 compared with 0.08nL (IQR: 0.05-0.10) for RASC-1 (p<0.0001). The detection yield of viable Mtb improved from 43% (median 2 CFU, range: 1-14) to 95% (median 20.5 DMN-Trehalose positive bacilli, range: 2-155). These improvements represent a lowering of the limit of detection in the RASC-2 platform to 0.9 Mtb bacilli per 100L of exhaled air from 3.3 Mtb bacilli per 100L (RASC-1).ConclusionThis study demonstrates that technical improvements in particle collection together with sensitive detection enable rapid quantitation of viable Mtb in bioaerosols of sputum positive TB cases. Increased sampling sensitivity may allow future TB transmission studies to be extended to sputum-negative and subclinical individuals, and suggests the potential utility of bioaerosol measurement for rapid intervention in other airborne infectious diseases.

Project description:ObjectiveTo investigate the potency of a hand-held point-of-care electronic-nose to diagnose pulmonary tuberculosis (PTB) among those suspected of PTB.MethodsSetting: Lung clinics and Dr. Sardjito Hospital, Yogyakarta, Indonesia. Participants: patients with suspected PTB and healthy controls. Sampling: 5 minutes exhaled breath. Sputum-smear-microscopy, culture, chest-radiography, and follow-up for 1.5-2.5 years, were used to classify patients with suspected PTB as active PTB, probably active PTB, probably no PTB, and no PTB. After building a breath model based on active PTB, no PTB, and healthy controls (Calibration phase), we validated the model in all patients with suspected PTB (Validation phase). In each variable (sex, age, Body Mass Index, co-morbidities, smoking status, consumption of alcohol, use of antibiotics, flu symptoms, stress, food and drink intake), one stratum's Receiver Operating Characteristic (ROC)-curve indicating sensitivity and specificity of the breath test was compared with another stratum's ROC-curve. Differences between Area-under-the-Curve between strata (p<0.05) indicated an association between the variable and sensitivity-specificity of the breath test. Statistical analysis was performed using STATA/SE 15.ResultsOf 400 enrolled participants, 73 were excluded due to extra-pulmonary TB, incomplete data, previous TB, and cancer. Calibration phase involved 182 subjects, and the result was validated in 287 subjects. Sensitivity was 85% (95%CI: 75-92%) and 78% (95%CI: 70-85%), specificity was 55% (95%CI: 44-65%) and 42% (95%CI: 34-50%), in calibration and validation phases, respectively. Test sensitivity and specificity were lower in men.ConclusionThe electronic-nose showed modest sensitivity and low specificity among patients with suspected PTB. To improve the sensitivity, a larger calibration group needs to be involved. With its portable form, it could be used for TB screening in remote rural areas and health care settings.

Project description:BackgroundTuberculosis remains a serious public health concern globally. The enormous social, economic, and health impacts of the diseases are attributed to the lack of updated data on the prevalence, geospatial distribution, population structures, and genotypic variants of the circulating M. tuberculosis.MethodsStructured questionnaire, mycobacterial culture, and standard 24-Mycobacterial Interspersed Repeated Units-Variable Number Tandem Repeats (MIRU-VNTR) were employed to collect sociodemographic characters, residence linked information, and genotype the isolates. The retrospective discrete Bernoulli model was used to identify the hot spot districts of sputum smear positivity, and Web-based Miru-VNTRPlus were used for the identification of lineages and sublineages.ResultsOut of 832 presumptive pulmonary tuberculosis (PTB) suspects, 119 (14.3%) were smear-positive. In the multivariate binary logistic model, PTB suspected patients in the age groups of 7-25 and 25-34 and those from rural residents were 4.53 (AOR = 4.53; 95% CI 2.25-9.13), 3.00 (AOR = 3.00; 95% CI 1.41-6.35) and 1.65 (AOR = 1.65; 95% CI 1.01-2.70) times at higher risk of turning smear-positive. Eleven (47.8%) districts of Arsi Zone were shown to have a high rate of clustering (RR = 2.27; 95% CI 1.62-3.2) of smear-positive PTB. Of 72 isolates queried for the lineage assignment, 59 (81.9%) were classified into the previously known lineages and 13 (18.1%) were not assigned to any known lineages. Overall, 42 (58.3%) belong to M. tuberculosis lineage 4 (Euro-American), 16 (22.2%) M. tuberculosis lineage 3 (Delhi/CAS), and 1 (1.4%) M. tuberculosis Lineage 1 (Indo-Oceanic/ East Africa Indian). Further classification to the sublineage indicates that the predominant lineage was Delhi/CAS comprising 16 (22.2%) isolates followed by 15 (20.8%) isolates belonging to Haarlem. The remaining isolates were distributed as 13 (18.1%) TUR, 6 (8.3%) LAM, 4 (5.5%) URAL, 4 (4.5%) NEW-1 and 1 (1.4%) EAI.ConclusionOur study showed higher smear-positive results among PTB suspected patients and remarkable spatial variation across districts of Arsi Zone in smear-positive PTB. This information together with the genotypic features could be used as input for the efforts of designing control strategies.

Project description:As a bioaerosol sampling standard, Andersen type impactor is widely used since its invention in 1950s, including the investigation of the anthrax attacks in the United States in 2001. However, its related problems such as impaction and desiccation stress as well as particle bounce have not been solved. Here, we improved its biological collection efficiencies by plating a mineral oil layer (100 µL) onto the agar plate. An Andersen six-stage sampler and a BioStage impactor were tested with mineral-oil-spread agar plates in collecting indoor and outdoor bacterial and fungal aerosols. The effects of sampling times (5, 10 and 20 min) were also studied using the BioStage impactor when sampling environmental bioaerosols as well as aerosolized Bacillus subtilis (G+) and Escherichia coli (G-). In addition, particle bounce reduction by mineral-oil-plate was also investigated using an optical particle counter (OPC). Experimental results revealed that use of mineral-oil-spread agar plate can substantially enhance culturable bioaerosol recoveries by Andersen type impactors (p-values<0.05). The recovery enhancement was shown to depend on bioaerosol size, type, sampling time and environment. In general, more enhancements (extra 20%) were observed for last stage of the Andersen six-stage samplers compared to the BioStage impactor for 10 min sampling. When sampling aerosolized B. subtilis, E. coli and environmental aerosols, the enhancement was shown to increase with increasing sampling time, ranging from 50% increase at 5 min to ?100% at 20 min. OPC results indicated that use of mineral oil can effectively reduce the particle bounce with an average of 66% for 10 min sampling. Our work suggests that enhancements for fungal aerosols were primarily attributed to the reduced impaction stress, while for bacterial aerosols reduced impaction, desiccation and particle bounce played major roles. The developed technology can readily enhance the agar-based techniques including those high volume portable samplers for bioaerosol monitoring.

Dataset Information

Bioaerosol sampling of patients with suspected pulmonary tuberculosis: a study protocol.

Publications

Bioaerosol sampling of patients with suspected pulmonary tuberculosis: a study protocol.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets