Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The direct synthesis of hydrogen peroxide from H₂ and O₂ using Pd-Ni/TiO₂ catalysts.

ABSTRACT: The direct synthesis of hydrogen peroxide (H₂O₂) from molecular H₂ and O₂ offers an attractive, decentralized alternative to production compared to the current means of production, the anthraquinone process. Herein we evaluate the performance of a 0.5%Pd-4.5%Ni/TiO₂ catalyst in batch and flow reactor systems using water as a solvent at ambient temperature. These reaction conditions are considered challenging for the synthesis of high H₂O₂ concentrations, with the use of sub-ambient temperatures and alcohol co-solvents typical. Catalytic activity was observed to be stable to prolonged use in multiple batch experiments or in a flow system, with selectivities towards H₂O₂ of 97% and 85%, respectively. This study was carried out in the absence of halide or acid additives that are typically used to inhibit sequential H₂O₂ degradation reactions showing that this Pd-Ni catalyst has the potential to produce H₂O₂ selectively. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

SUBMITTER: Crole DA

PROVIDER: S-EPMC7422896 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Silver-palladium catalysts for the direct synthesis of hydrogen peroxide.

Project description:A series of bimetallic silver-palladium catalysts supported on titania were prepared by wet impregnation and assessed for the direct synthesis of hydrogen peroxide, and its subsequent side reactions. The addition of silver to a palladium catalyst was found to significantly decrease hydrogen peroxide productivity and hydrogenation, but crucially increase the rate of decomposition. The decomposition product, which is predominantly hydroxyl radicals, can be used to decrease bacterial colonies. The interaction between silver and palladium was characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR). The results of the TPR and XPS indicated the formation of a silver-palladium alloy. The optimal 1% Ag-4% Pd/TiO2 bimetallic catalyst was able to produce approximately 200?ppm of H2O2 in 30?min. The findings demonstrate that AgPd/TiO2 catalysts are active for the synthesis of hydrogen peroxide and its subsequent decomposition to reactive oxygen species. The catalysts are promising for use in wastewater treatment as they combine the disinfectant properties of silver, hydrogen peroxide production and subsequent decomposition.This article is part of a discussion meeting issue 'Providing sustainable catalytic solutions for a rapidly changing world'.

| S-EPMC5719220 | biostudies-literature

Palladium-Based Bimetallic Nanocrystal Catalysts for the Direct Synthesis of Hydrogen Peroxide.

Project description:The direct synthesis of H2 O2 from H2 and O2 is a strongly desired reaction for green processes and a promising alternative to the commercialized anthraquinone process. The design of efficient catalysts with high activity and H2 O2 selectivity is highly desirable and yet challenging. Metal dopants enhance the performance of the active phase by increasing reaction rates, stability, and/or selectivity. The identification of efficient dopants relies mostly on catalysts prepared with a random and non-uniform deposition of active and promoter phases. To study the promotional effects of metal doping on Pd catalysts, we employ colloidal, bimetallic nanocrystals (NCs) to produce catalysts in which the active and doping metals are colocalized to a fine extent. In the absence of any acid and halide promotors, PdSn and PdGa NCs supported on acid-pretreated TiO2 (PdSn/s-TiO2 , PdGa/s-TiO2 ) were highly efficient and outperformed the monometallic Pd catalyst (Pd/s-TiO2 ), whereas in the presence of an acid promotor, the overall H2 O2 productivity was also further enhanced for the Ni-, Ga-, In-, and Sn-doped catalysts with respect to Pd/s-TiO2 .

| S-EPMC7318153 | biostudies-literature

N-Heterocyclic Carbene Modified Palladium Catalysts for the Direct Synthesis of Hydrogen Peroxide.

Project description:Heterogeneous palladium catalysts modified by N-heterocyclic carbenes (NHCs) are shown to be highly effective toward the direct synthesis of hydrogen peroxide (H2O2), in the absence of the promoters which are typically required to enhance both activity and selectivity. Catalytic evaluation in a batch regime demonstrated that through careful selection of the N-substituent of the NHC it is possible to greatly enhance catalytic performance when compared to the unmodified analogue and reach concentrations of H2O2 rivaling that obtained by state-of-the-art catalysts. The enhanced performance of the modified catalyst, which is retained upon reuse, is attributed to the ability of the NHC to electronically modify Pd speciation.

| S-EPMC9449981 | biostudies-literature

Highly efficient hydrogen peroxide direct synthesis over a hierarchical TS-1 encapsulated subnano Pd/PdO hybrid.

Project description:We report a hierarchical TS-1 encapsulated subnano Pd/PdO hybrid catalyst that shows unprecedented activity in H2O2 direct synthesis from H2 and O2. The macro reaction rate in 30 min is up to 35 010 mmol gPd -1 h-1 at ambient temperature. Such high catalytic activity is achieved due to the hierarchical porous structure of TS-1 and the formation of the encapsulated subnano Pd/PdO hybrid after oxidation/reduction/oxidation treatment.

| S-EPMC9063948 | biostudies-literature

Direct synthesis of hydrogen peroxide from plasma-water interactions.

Project description:Hydrogen peroxide (H2O2) is usually considered to be an important reagent in green chemistry since water is the only by-product in H2O2 involved oxidation reactions. Early studies show that direct synthesis of H2O2 by plasma-water interactions is possible, while the factors affecting the H2O2 production in this method remain unclear. Herein, we present a study on the H2O2 synthesis by atmospheric pressure plasma-water interactions. The results indicate that the most important factors for the H2O2 production are the processes taking place at the plasma-water interface, including sputtering, electric field induced hydrated ion emission, and evaporation. The H2O2 production rate reaches ~1200 μmol/h when the liquid cathode is purified water or an aqueous solution of NaCl with an initial conductivity of 10500 μS cm-1.

| S-EPMC5137161 | biostudies-literature

Direct Synthesis of Polyethylene Thermoplastic Elastomers Using Hybrid Bulky Acenaphthene-Based α-Diimine Ni(II) Catalysts.

Project description:Recently, polyolefin thermoplastic elastomers can be obtained directly using ethylene as a single feedstock via α-diimine nickel-catalyzed ethylene chain walking polymerization. Here, a new range of bulky acenaphthene-based α-diimine nickel complexes with hybrid o-phenyl and -diarylmethyl anilines were constructed and applied to ethylene polymerization. All the nickel complexes under the activation of excess Et2AlCl exhibited good activity (level of 106 g mol-1 h-1) and produced polyethylene with high molecular weight (75.6-352.4 kg/mol) as well as proper branching densities (55-77/1000C). All the branched polyethylenes obtained exhibited high strain (704-1097%) and moderate to high stress (7-25 MPa) at break values. Most interestingly, the polyethylene produced by the methoxy-substituted nickel complex exhibited significantly lower molecular weights and branching densities, as well as significantly poorer strain recovery values (48% vs. 78-80%) than those by the other two complexes under the same conditions.

| S-EPMC10005668 | biostudies-literature

Viable production of hydrogen and methane from polluted water using eco-friendly plasmonic Pd-TiO2 nanocomposites.

Project description:Solar-to-fuel conversion is a novel clean energy approach that has gained the interest of many researchers. Solar-driven photocatalysts have become essential to providing valuable fuel gases such as methane and hydrogen. Solar energy has emerged as a renewable, abundant energy source that can efficiently drive photochemical reactions through plasmonic photocatalysis. As a capping agent, orange peel extract was used in this study in a microwave-assisted green method to incorporate titanium dioxide with distinct amounts (3, 5, and 7 wt%) from Pd-plasmonic nanoparticles (2-5 nm). The leading role for plasmonic nanoparticles made from Pd-metal is enhancing the photocatalyst's ability to capture visible light, improving its performance. X-Ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Brunauer, Emmett, and Teller (BET) surface area analysis, and UV-vis DRS analyses have investigated the obtained plasmonic photocatalysts' crystallographic, morphological, and optical characteristics. The UV-vis absorption spectra demonstrated the visible light absorption capacity attributed to the localized surface plasmonic resonance (LSPR) behavior of the newly formed nanoplasmonic photocatalysts. The generated Pd-TiO2 nanomaterials' photocatalytic activity has been examined and evaluated for combustible gas production, including the formation of CH4 and H2 from the photocatalytic degradation of Reactive Yellow 15 (RY) during a deoxygenated photoreaction in a homemade solar photobiogas reactor.

| S-EPMC9809211 | biostudies-literature

Synthesis of Ni/NiAlOx Catalysts for Hydrogenation Saturation of Phenanthrene.

Project description:The saturation of octahydrophenanthrene was the rate-determining step in the hydrogenation process from phenanthrene to perhydrophenanthrene, which was due to the steric hindrance and competitive adsorption of octahydrophenanthrene. In this work, a series of Ni/NiAlOx catalysts with a uniform electron-deficient state of Ni derived from the nickel aluminate structure was synthesized to overcome the disadvantage of noble catalyst and the traditional sulfided catalysts in the saturation hydrogenation process of phenanthrene. Results showed that the catalyst calcinated at 650°C possessed more Ni2+ (∼98%) occupying octahedral sites and exhibited the highest robs (1.53 × 10-3 mol kg-1 s-1) and TOF (14.64 × 10-3 s-1) for phenanthrene hydrogenation. Furthermore, its ability to overcome steric hindrance and promote the rate-determining step was proven by octahydrophenanthrene hydrogenation. Comparing the evolution of hydrogenation activity with the change in the electronic structure of surface Ni sites, it was shown that the increase of metallic electron deficiency hindered the π-back bonding between surface Ni and aromatic rings, which was unfavorable for aromatic adsorption. As a result, the phenanthrene hydrogenation saturation performance can be enhanced by stabilizing the electron-deficient state of surface Ni on an optimal degree.

| S-EPMC8531806 | biostudies-literature

Direct synthesis of hydrogen peroxide from hydrogen and oxygen by using a water-soluble iridium complex and flavin mononucleotide.

Project description:H2 , O2 to H2 O2 : The direct synthesis of hydrogen peroxide from hydrogen and oxygen in water has been made possible by using an iridium(III) complex, [Ir(III) (Cp*)(4-(1H-pyrazol-1-yl-κN(2) )benzoic acid-κC(3) )(H2 O)]2 SO4 , and flavin mononucleotide. This method gives hydrogen peroxide with a high turnover number (847) and yield (19.2 %) under normal pressure and at room temperature.

| S-EPMC4138997 | biostudies-literature

High-Efficiency Photocatalytic Degradation of Tannic Acid Using TiO2 Heterojunction Catalysts.

Project description:Photocatalysts have been extensively used for hydrogen evolution or organic degradation. In this work, two different heterojunction types of composite photocatalysts, 1T-MoS2@TiO2 with Schottky heterojunction and 2H-MoS2@TiO2 with type-II heterojunction, are synthesized via hydrothermal synthesis. These two composite materials exhibit excellent photocatalytic activity toward the degradation of tannic acid, which is a typical organic in nuclear wastewater. At an optimal loading of 16% 1T-MoS2, the 1T-MoS2@TiO2 shows the highest degradation capacity of 98%, which is 3.2 times higher than that of pure TiO2. The degradation rate of 16% 1T-MoS2@TiO2 is much higher than that of 13% 2H-MoS2@TiO2. The enhanced photocatalytic activity might be attributed to the improved charge transfer according to the mechanism investigation, supported by the X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) analyses. This work provides new opportunities for constructing highly efficient catalysts for nuclear waste disposal.

| S-EPMC8567273 | biostudies-literature