Dataset Information

Calcium channel blocker induced gingival enlargement following implant placement in a fibula free flap reconstruction of the mandible: a case report.

ABSTRACT: BACKGROUND:Gingival tissue enlargement is a common side effect of antiepileptic medications (e.g. phenytoin and sodium valproate), immunosuppressing drugs (e.g. cyclosporine) and calcium channel blockers (e.g. nifedipine, verapamil, amlodipine) (Murakami et al. 2018, Clin Periodontol 45:S17-S27, 2018). The clinical and histological appearances of lesions caused by these drugs are indistinguishable from one another (Murakami et al. 2018, Clin Periodontol 45:S17-S27, 2018). Drug-induced gingival enlargement is rarely seen in edentulous patients. CASE PRESENTATION:This case presents a 72-year-old female with a history of squamous cell carcinoma of the floor of the mouth treated with surgical excision and fibula-free flap reconstruction. Following the uncovering of osseointegrated implants placed in the fibular-free flap, the patient developed gingival enlargement of the floor of the mouth. Cessation of amlodipine and switching to an alternative medication lead to a resolution of the enlarged tissue. CONCLUSIONS:This case illustrates that gingival enlargement can occur around dental implants, most notably in rehabilitation cases in patients who have had head and neck cancer. Clinicians should be aware of the risk of gingival enlargement in hypertensive patients taking calcium channel blockers prior to implant placement.

SUBMITTER: Quach H

PROVIDER: S-EPMC7431483 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Calcium channel blocker induced gingival enlargement following implant placement in a fibula free flap reconstruction of the mandible: a case report.

Quach Henry H Ray-Chaudhuri Arijit A

International journal of implant dentistry 20200818 1

<h4>Background</h4>Gingival tissue enlargement is a common side effect of antiepileptic medications (e.g. phenytoin and sodium valproate), immunosuppressing drugs (e.g. cyclosporine) and calcium channel blockers (e.g. nifedipine, verapamil, amlodipine) (Murakami et al. 2018, Clin Periodontol 45:S17-S27, 2018). The clinical and histological appearances of lesions caused by these drugs are indistinguishable from one another (Murakami et al. 2018, Clin Periodontol 45:S17-S27, 2018). Drug-induced gi ...[more]

PMID: 32808200

Similar Datasets

Project description:BackgroundDue to the special anatomy morphology and physiological function of the mandible, it has always become a challenge to accurately reconstruct the mandibular defect in maxillofacial surgery. Digital three dimensions (3D) printing surgical guide, as the effective method for individual and accurate surgery, is a hotspot of clinical research at present. In this study, 3D printing PLA surgical guide plate was applied to reconstruct the mandibular defect with fibula flap, its clinical effect and accuracy were evaluated, which aimed to improve the accurate reconstruction of mandibular defects.MethodsAfter sterilization, the dimension deformation of the PLA standard specimen were measured. Eighteen patients diagnose with mandibular tumor were collected as observation objects. Then partial mandible resection and simultaneous mandible reconstruction with fibula graft were implemented according to the computer-aided design plan. The clinical effects of 3D printing PLA guide plates application were evaluated by facial contours, occlusal stability and chewing function. Through registering the postoperative computed images reconstruction with preoperative designed shape, the reconstruction accuracy was evaluated by detecting the maximum difference including the distance between lateral convex point of the condyles, the distance between medial convex point of the condyles and the horizontal contained angle between long axis of the condyles.ResultsAfter high temperature steam sterilization, the curvature of the PLA specimen with 100% filling rate and 4.8 mm thickness were the smallest and their dimension deformation had no statistical significance (P>0.05). The minimally deformed 3D printing PLA guide plate were smoothly placed in the right place during the operation. After surgery, the face was symmetrical, the occlusal relationship was restored well and no deviation of the mandibular movement were found. The spiral computed tomography (SCT) scanning showed that the distance between lateral/medial convex points of the condyle and the horizontal contained angle were 128.34±8.68 mm, 88.69±6.75 mm and 145.87°±12.01°. Compared with preoperative design, the maximum deviation of the actual postoperative registration was 1.67±0.63, and the difference was not statistically significant (P>0.05).ConclusionsThe application of 3D printing PLA guide plate in the segmental section and reconstruction of the mandible can effectively simplify the operation, and better reconstruct the continuity of the mandible. The surgical accuracy can fully meet clinical needs with relatively low prices.

Project description:BackgroundExtensive through-and-through oromandibular defects after advanced oral carcinoma excision pose a reconstructive challenge for the head and neck surgeon. These complex oromandibular wounds often involve the mandible, oral and/or aerodigestive mucosa, and the external skin. As a result, these defects are often not amenable to reconstruction with a single flap due to the volume of soft tissue needed and the three-dimensional reconstructive requirement. The use of two free flaps has often been suggested to overcome this reconstructive challenge. A simpler and less technically demanding way to deal with this may involve the use of a free flap in combination with a pedicled regional flap. We present our experience of the use of a simultaneous microvascular fibula free flap (FFF) with a pectoralis major myocutaneous flap (PMMC) for addressing these defects.MethodsA retrospective chart review was performed of patients treated with a FFF and PMMC combination for the reconstruction of oromandibular defects at the University of Mississippi Medical Center (Jackson, MS) between October 2013 and February 2016. A minimum follow-up of 12 months was required. Data collected included the extent and location of tumor involvement, size of the postablative defect, tumor histology, clinical and pathological staging, length of follow-up, functional outcomes, and associated complications.ResultsA total of three patients were identified to have been treated with the above technique. Defects repaired involved through-and-through mandibular defects with associated oral mucosa and external skin defects. In all cases, the FFF was used for restoring bony continuity with the skin paddle used to reconstruct the intraoral lining. The PMMC was used for reconstruction of the external skin defect and for providing soft tissue bulk. The average size of the fibula skin paddle used for intraoral reconstruction was 7.7 cm × 11.7 cm. The average size of the PMMC paddle was 7.3 × 9 cm. The mean follow-up was 21.7 months. Both the FFF and PMMC survived in all cases, although postoperative wound healing complications occurred in two of the three patients. There was one partial flap loss. Two patients regained good oral intake while one patient tolerated oral intake but was PEG tube-dependent.ConclusionsThe combination of pectoralis major myocutaneous flap and a vascularized free fibular flap is a viable option for the reconstruction of complex through-and-through oromandibular defects. This technique may be useful when a single microvascular free flap is not sufficient for reconstruction of such defects.

Project description:Image-guided surgery, prosthetic-based virtual planning, 3D printing, and CAD/CAM technology are changing head and neck ablative and reconstructive surgical oncology. Due to quality-of-life improvement, dental implant rehabilitation could be considered in every patient treated with curative intent. Accurate implant placement is mandatory for prosthesis long-term stability and success in oncologic patients. We present a prospective study, with a novel workflow, comprising 11 patients reconstructed with free flaps and 56 osseointegrated implants placed in bone flaps or remnant jaws (iliac crest, fibula, radial forearm, anterolateral thigh). Starting from CT data and jaw plaster model scanning, virtual dental prosthesis was designed. Then prosthetically driven dental implacement was also virtually planned and transferred to the patient by means of intraoperative infrared optical navigation (first four patients), and a combination of conventional static teeth supported 3D-printed acrylic guide stent, intraoperative dynamic navigation, and augmented reality for final intraoperative verification (last 7 patients). Coronal, apical, and angular deviation between virtual surgical planning and final guided intraoperative position was measured on each implant. There is a clear learning curve for surgeons when applying guided methods. Initial only-navigated cases achieved low accuracy but were comparable to non-guided freehand positioning due to jig registration instability. Subsequent dynamic navigation cases combining highly stable acrylic static guides as reference and registration markers result in the highest accuracy with a 1-1.5-mm deviation at the insertion point. Smartphone-based augmented reality visualization is a valuable tool for intraoperative visualization and final verification, although it is still a difficult technique for guiding surgery. A fixed screw-retained ideal dental prosthesis was achieved in every case as virtually planned. Implant placement, the final step in free flap oncological reconstruction, could be accurately planned and placed with image-guided surgery, 3D printing, and CAD/CAM technology. The learning curve could be overcome with preclinical laboratory training, but virtually designed and 3D-printed tracer registration stability is crucial for accurate and predictable results. Applying these concepts to our difficult oncologic patient subgroup with deep anatomic alterations ended in comparable results as those reported in non-oncologic patients.

Project description:To analyze the morphology of paired fibula and mandible aiming to choose optimal fibular segments for mandibular reconstruction in a Chinses population. A total of 118 cases of paired mandible and fibula was collected. All patients were received preoperative cone beam CT (CBCT) scans for mandibular evaluation and CT-angiographical (CTA) examination of the bilateral lower legs, respectively. The cross-sectional morphological differences between proximal (Side P), middle (Side M) and distal (Side D) segments of fibula and anterior, premolar and molar areas of mandible were compared. The most frequent cross-sectional shape at Side D, Side M and Side P portion of fibula was circular (75.4%), triangular (67.8%) and circular (49.2%), respectively. In anterior, premolar and molar areas of mandible, the most of the cross-section was s-shape (90.82%), straight (83.64%) and oblique (91.89%), respectively. The height and width of upper one third (W1) at Side M were significantly larger than those of Side D and Side P (p < 0.0001). There was significantly difference of width of lower one third (W2) among three groups (p < 0.0001). As for the height and widths of mandible, there was significant difference among anterior, premolar and molar regions (p < 0.0001). The rate of height between Side M of fibula and mandible (H (Side M/area)) was significantly larger than H (Side D/area) and H (Side P/area) (p < 0.01). The ratio of W1 between Side D of fibula and mandible (W1 (Side D/area)) was significantly larger than that of W1 (Side M/area) and W1 (side P/area) (p < 0.05). As for the ratio of W2 between fibula and mandible (W2 (plane/area)), there was significant difference among groups (p < 0.01). The distal and middle segments of fibula were suitable for reconstructing the anterior area of mandible and the proximal segment of fibula was more compatible with the premolar and molar areas of mandible.Clinical Relevance Presurgical morphometric analysis of paired fibula and mandible aids for optimal fibular-based mandibular reconstruction.

Dataset Information

Calcium channel blocker induced gingival enlargement following implant placement in a fibula free flap reconstruction of the mandible: a case report.

Publications

Calcium channel blocker induced gingival enlargement following implant placement in a fibula free flap reconstruction of the mandible: a case report.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets