Lensless light-field imaging through diffuser encoding.
Ontology highlight
ABSTRACT:
SUBMITTER: Cai Z
PROVIDER: S-EPMC7438505 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Quantitative phase imaging (QPI) is a label-free technique providing both morphology and quantitative biophysical information in biomedicine. However, applying such a powerful technique to in vivo pathological diagnosis remains challenging. Multi-core fiber bundles (MCFs) enable ultra-thin probes for in vivo imaging, but current MCF imaging techniques are limited to amplitude imaging modalities. We demonstrate a computational lensless microendoscope that uses an ultra-thin bare MCF to perform quantitative phase imaging with microscale lateral resolution and nanoscale axial sensitivity of the optical path length. The incident complex light field at the measurement side is precisely reconstructed from the far-field speckle pattern at the detection side, enabling digital refocusing in a multi-layer sample without any mechanical movement. The accuracy of the quantitative phase reconstruction is validated by imaging the phase target and hydrogel beads through the MCF. With the proposed imaging modality, three-dimensional imaging of human cancer cells is achieved through the ultra-thin fiber endoscope, promising widespread clinical applications.
| S-EPMC9255502 | biostudies-literature
Project description:SignificanceHigh-speed 3D imaging methods have been playing crucial roles in many biological discoveries.AimWe present a hybrid light-field imaging system and image processing algorithm that can visualize high-speed biological events.ApproachThe hybrid light-field imaging system uses the selective plane optical illumination, which simultaneously records a high-resolution 2D image and a low-resolution 4D light-field image. The high-resolution 4D light-field image is obtained by applying the hybrid algorithm derived from the deconvolution and phase retrieval methods.ResultsHigh-resolution 3D imaging at a speed of 100-s volumes per second over an imaging field of 250 × 250 × 80 μm3 in the x, y, and z axis, respectively, is achieved with a 2.5 times enhancement in lateral resolution over the entire imaging field compared with standard light-field systems. In comparison to the deconvolution algorithm, the hybrid algorithm addresses the artifact issue at the focal plane and reduces the computation time by a factor of 4.ConclusionsThe new hybrid light-field imaging method realizes high-resolution and ultrafast 3D imaging with a compact setup and simple algorithm, which may help discover important applications in biophotonics to visualize high-speed biological events.
| S-EPMC7548856 | biostudies-literature
Project description:The growing number of drug-resistant bacterial infections worldwide is driving renewed interest in phage therapy. Based on the use of a personalized cocktail composed of highly specific bacterial viruses, this therapy relies on a range of tests on agar media to determine the most active phage on a given bacterial target (phage susceptibility testing), or to isolate new lytic phages from an environmental sample (enrichment of phage banks). However, these culture-based techniques are still solely interpreted through direct visual detection of plaques. The main objective of this work is to investigate computer-assisted methods in order to ease and accelerate diagnosis in phage therapy but also to study phage plaque growth kinetics. For this purpose, we designed a custom wide-field lensless imaging device, which allows continuous monitoring over a very large area sensor (3.3 cm2). Here we report bacterial susceptibility to Staphylococcus aureus phage in 3 hr and estimation of infectious titer in 8 hr 20 min. These are much shorter time-to-results than the 12 to 24 hours traditionally needed, since naked eye observation and counting of phage plaques is still the most widely used technique for susceptibility testing prior to phage therapy. Moreover, the continuous monitoring of the samples enables the study of plaque growth kinetics, which enables a deeper understanding of the interaction between phage and bacteria. Finally, thanks to the 4.3 μm resolution, we detect phage-resistant bacterial microcolonies of Klebsiella pneumoniae inside the boundaries of phage plaques and thus show that our prototype is also a suitable device to track phage resistance. Lensless imaging is therefore an all-in-one method that could easily be implemented in cost-effective and compact devices in phage laboratories to help with phage therapy diagnosis.
| S-EPMC7987195 | biostudies-literature
Project description:In this paper, an irregular displacement-based lensless wide-field microscopy imaging platform is presented by combining digital in-line holography and computational pixel super-resolution using multi-frame processing. The samples are illuminated by a nearly coherent illumination system, where the hologram shadows are projected into a complementary metal-oxide semiconductor-based imaging sensor. To increase the resolution, a multi-frame pixel resolution approach is employed to produce a single holographic image from multiple frame observations of the scene, with small planar displacements. Displacements are resolved by a hybrid approach: (i) alignment of the LR images by a fast feature-based registration method, and (ii) fine adjustment of the sub-pixel information using a continuous optimization approach designed to find the global optimum solution. Numerical method for phase-retrieval is applied to decode the signal and reconstruct the morphological details of the analyzed sample. The presented approach was evaluated with various biological samples including sperm and platelets, whose dimensions are in the order of a few microns. The obtained results demonstrate a spatial resolution of 1.55 µm on a field-of-view of ?30 mm2.
| S-EPMC5898403 | biostudies-literature
Project description:5.3 million American couples of reproductive age (9%) are affected by infertility, among which male factors account for up to 50% of cases, which necessitates the identification of parameters defining sperm quality, including sperm count and motility. In vitro fertilization (IVF) with or without intra cytoplasmic sperm injection (ICSI) has become the most widely used assisted reproductive technology (ART) in modern clinical practice to overcome male infertility challenges. One of the obstacles of IVF and ICSI lies in identifying and isolating the most motile and presumably healthiest sperm from semen samples that have low sperm counts (oligozoospermia) and/or low sperm motility (oligospermaesthenia). Microfluidic systems have shown potential to sort sperm with flow systems. However, the small field of view (FOV) of conventional microscopes commonly used to image sperm motion presents challenges in tracking a large number of sperm cells simultaneously. To address this challenge, we have integrated a lensless charge-coupled device (CCD) with a microfluidic chip to enable wide FOV and automatic recording as the sperm move inside a microfluidic channel. The integrated system enables the sorting and tracking of a population of sperm that have been placed in a microfluidic channel. This channel can be monitored in both horizontal and vertical configuration similar to a swim-up column method used clinically. Sperm motilities can be quantified by tracing the shadow paths for individual sperm. Moreover, as the sperm are sorted by swimming from the inlet towards the outlet of a microfluidic channel, motile sperm that reach the outlet can be extracted from the channel at the end of the process. This technology can lead to methods to evaluate each sperm individually in terms of motility response in a wide field of view, which could prove especially useful, when working with oligozoospermic or oligospermaesthenic samples, in which the most motile sperm need to be isolated from a pool of small number of sperm.
| S-EPMC3812937 | biostudies-literature
Project description:Optical fiber bundle microendoscopes are widely used for visualizing hard-to-reach areas of the human body. These ultrathin devices often forgo tunable focusing optics because of size constraints and are therefore limited to two-dimensional (2D) imaging modalities. Ideally, microendoscopes would record 3D information for accurate clinical and biological interpretation, without bulky optomechanical parts. Here, we demonstrate that the optical fiber bundles commonly used in microendoscopy are inherently sensitive to depth information. We use the mode structure within fiber bundle cores to extract the spatio-angular description of captured light rays-the light field-enabling digital refocusing, stereo visualization, and surface and depth mapping of microscopic scenes at the distal fiber tip. Our work opens a route for minimally invasive clinical microendoscopy using standard bare fiber bundle probes. Unlike coherent 3D multimode fiber imaging techniques, our incoherent approach is single shot and resilient to fiber bending, making it attractive for clinical adoption.
| S-EPMC6486219 | biostudies-literature
Project description:Imaging systems with miniaturized device footprint, real-time processing speed and high resolution three-dimensional (3D) visualization are critical to broad biomedical applications such as endoscopy. Most of existing imaging systems rely on bulky lenses and mechanically refocusing to perform 3D imaging. Here, we demonstrate GEOMScope, a lensless single-shot 3D microscope that forms image through a single layer of thin microlens array and reconstructs objects through an innovative algorithm combining geometrical-optics-based pixel back projection and background suppressions. We verify the effectiveness of GEOMScope on resolution target, fluorescent particles and volumetric objects. Comparing to other widefield lensless imaging devices, we significantly reduce the required computational resource and increase the reconstruction speed by orders of magnitude. This enables us to image and recover large volume 3D object in high resolution with near real-time processing speed. Such a low computational complexity is attributed to the joint design of imaging optics and reconstruction algorithms, and a joint application of geometrical optics and machine learning in the 3D reconstruction. More broadly, the excellent performance of GEOMScope in imaging resolution, volume, and reconstruction speed implicates that geometrical optics could greatly benefit and play an important role in computational imaging.
| S-EPMC8445384 | biostudies-literature
Project description:The need for lightweight, miniature imaging systems is becoming increasingly prevalent in light of the development of wearable electronics, IoT devices, and drones. Computational imaging enables new types of imaging systems that replace standard optical components like lenses with cleverly designed computational processes. Traditionally, many of these types of systems use conventional complementary metal oxide semiconductor (CMOS) or charge coupled device (CCD) sensors for data collection. While this allows for rapid development of large-scale systems, the lack of system-sensor co-design limits the compactness and performance. Here we propose integrated photonics as a candidate platform for the implementation of such co-integrated systems. Using grating couplers and co-designed computational processing in lieu of a lens, we demonstrate the use of silicon photonics as a viable platform for computational imaging with a prototype lensless imaging device. The proof-of-concept device has 20 sensors and a 45-degree field of view, and its optics and sensors are contained within a 2,000 ?m × 200 ?m × 20 ?m volume.
| S-EPMC6997425 | biostudies-literature
Project description:We demonstrate an integrated platform that merges a microfluidic chip with lensless imaging to target CD4(+) T-lymphocyte counts for HIV point-of-care testing at resource-limited settings. The chips were designed and fabricated simply with a laser cutter without using expensive cleanroom equipment. To capture CD4(+) T-lymphocytes from blood, anti-CD4 antibody was immobilized on only one side of the microfluidic chip. These captured cells were detected through an optically clear chip using a charge coupled device (CCD) sensor by lensless shadow imaging techniques. Gray scale image of the captured cells in a 24 mm x 4 mm x 50 microm microfluidic chip was obtained by the lensless imaging platform. The automatic cell counting software enumerated the captured cells in 3s. Captured cells were also imaged with a fluorescence microscope and manually counted to characterize functionality of the integrated platform. The integrated platform achieved 70.2+/-6.5% capture efficiency, 88.8+/-5.4% capture specificity for CD4(+) T-lymphocytes, 96+/-1.6% CCD efficiency, and 83.5+/-2.4% overall platform performance (n=9 devices) compared to the gold standard, i.e. flow cytometry count. The integrated system gives a CD4 count from blood within 10 min. The integrated platform points a promising direction for point-of-care testing (POCT) to rapidly capture, image and count subpopulations of cells from blood samples in an automated matter.
| S-EPMC2733855 | biostudies-literature
Project description:Quantitative phase imaging (QPI) techniques are widely used for the label-free examining of transparent biological samples. QPI techniques can be broadly classified into interference-based and interferenceless methods. The interferometric methods which record the complex amplitude are usually bulky with many optical components and use coherent illumination. The interferenceless approaches which need only the intensity distribution and works using phase retrieval algorithms have gained attention as they require lesser resources, cost, space and can work with incoherent illumination. With rapid developments in computational optical techniques and deep learning, QPI has reached new levels of applications. In this tutorial, we discuss one of the basic optical configurations of a lensless QPI technique based on the phase-retrieval algorithm. Simulative studies on QPI of thin, thick, and greyscale phase objects with assistive pseudo-codes and computational codes in Octave is provided. Binary phase samples with positive and negative resist profiles were fabricated using lithography, and a single plane and two plane phase objects were constructed. Light diffracted from a point object is modulated by phase samples and the corresponding intensity patterns are recorded. The phase retrieval approach is applied for 2D and 3D phase reconstructions. Commented codes in Octave for image acquisition and automation using a web camera in an open source operating system are provided.
| S-EPMC8321078 | biostudies-literature