Dataset Information

Pressure based MRI-compatible muscle fascicle length and joint angle estimation.

ABSTRACT:

Background

Functional magnetic resonance imaging (fMRI) provides critical information about the neurophysiology of the central nervous systems (CNS), posing clinical significance for the understanding of neuropathologies and advancement of rehabilitation. Typical fMRI study designs include subjects performing designed motor tasks within specific time frames, in which fMRI data are then analyzed by assuming that observed functional brain activations correspond to the designed tasks. Therefore, developing MRI-compatible sensors that enable real-time monitoring of subjects' task performances would allow for highly accurate fMRI studies. While several MRI-compatible sensors have been developed, none have demonstrated the ability to measure individual muscle fascicle length during fMRI, which could help uncover the complexities of the peripheral and central nervous systems. Furthermore, previous MRI-compatible sensors have been focused on biologically intact populations, limiting accessibility to populations such as those who have undergone amputation.

Methods

We propose a lightweight, low-cost, skin impedance-insensitive pressure-based muscular motion sensor (pMMS) that provides reliable estimates of muscle fascicle length and joint angle. The muscular motions are captured through measured pressure changes in an air pocket wrapped around the muscle of interest, corresponding to its muscular motion. The muscle fascicle length and joint angle are then estimated from the measured pressure changes based on the proposed muscle-skin-sensor interaction dynamics. Furthermore, we explore an integration method of multiple pMMS systems to expand the sensor capacity of estimating muscle fascicle length and joint angle. Ultrasound imaging paired with joint encoder measurements are utilized to assess pMMS estimation accuracy of muscle fascicle length in the tibialis anterior (TA) and ankle joint angle, respectively, of five biologically intact subjects.

Results

We found that a single pMMS sufficiently provides robust and accurate estimations of TA muscle fascicle length and ankle joint angle during dorsiflexion at various speeds and amplitudes. Further, differential pressure readings from two pMMSs, in which each pMMS were proximally and distally placed, were able to mitigate errors due to perturbations, expanding pMMS capacity for muscle fascicle length and ankle joint angle estimation during the full range of plantar flexion and dorsiflexion.

Conclusions

Our results from this study demonstrate the feasibility of the pMMS system to further be incorporated in fMRI settings for real-time monitoring of subjects' task performances, allowing sophisticated fMRI study designs.

SUBMITTER: Song H

PROVIDER: S-EPMC7449022 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Pressure based MRI-compatible muscle fascicle length and joint angle estimation.

Song Hyungeun H Israel Erica E Srinivasan Shriya S Herr Hugh H

Journal of neuroengineering and rehabilitation 20200826 1

<h4>Background</h4>Functional magnetic resonance imaging (fMRI) provides critical information about the neurophysiology of the central nervous systems (CNS), posing clinical significance for the understanding of neuropathologies and advancement of rehabilitation. Typical fMRI study designs include subjects performing designed motor tasks within specific time frames, in which fMRI data are then analyzed by assuming that observed functional brain activations correspond to the designed tasks. There ...[more]

PMID: 32843093

Similar Datasets

Project description:Forearm rotation (supination/pronation) alters corticospinal excitability to the biceps brachii, but it is unclear whether corticospinal excitability is influenced by joint angle, muscle length, or both. Thus the purpose of this study was to separately examine elbow joint angle and muscle length on corticospinal excitability. Corticospinal excitability to the biceps and triceps brachii was measured using motor evoked potentials (MEPs) elicited via transcranial magnetic stimulation. Spinal excitability was measured using cervicomedullary motor evoked potentials (CMEPs) elicited via transmastoid electrical stimulation. Elbow angles were manipulated with a fixed biceps brachii muscle length (and vice versa) across five unique postures: 1) forearm neutral, elbow flexion 90°; 2) forearm supinated, elbow flexion 90°; 3) forearm pronated, elbow flexion 90°; 4) forearm supinated, elbow flexion 78°; and 5) forearm pronated, elbow flexion 113°. A musculoskeletal model determined biceps brachii muscle length for postures 1-3, and elbow joint angles (postures 4-5) were selected to maintain biceps length across forearm orientations. MEPs and CMEPs were elicited at rest and during an isometric contraction of 10% of maximal biceps muscle activity. At rest, MEP amplitudes to the biceps were largest during supination, which was independent of elbow joint angle. CMEP amplitudes were not different when the elbow was fixed at 90° but were largest in pronation when muscle length was controlled. During an isometric contraction, there were no significant differences across forearm postures for either MEP or CMEP amplitudes. These results highlight that elbow joint angle and biceps brachii muscle length can each independently influence spinal excitability. NEW & NOTEWORTHY Changes in upper limb posture can influence the responsiveness of the central nervous system to artificial stimulations. We established a novel approach integrating neurophysiology techniques with biomechanical modeling. Through this approach, the effects of elbow joint angle and biceps brachii muscle length on corticospinal and spinal excitability were assessed. We demonstrate that spinal excitability is uniquely influenced by joint angle and muscle length, and this highlights the importance of accounting for muscle length in neurophysiological studies.

Project description:Background and objectiveDynamic muscle fascicle length measurements through B-mode ultrasound have become popular for the non-invasive physiological insights they provide regarding musculoskeletal structure-function. However, current practices typically require time consuming post-processing to track muscle length changes from B-mode images. A real-time measurement tool would not only save processing time but would also help pave the way toward closed-loop applications based on feedback signals driven by in vivo muscle length change patterns. In this paper, we benchmark an approach that combines traditional machine learning (ML) models with B-mode ultrasound recordings to obtain muscle fascicle length changes in real-time. To gauge the utility of this framework for 'in-the-loop' applications, we evaluate accuracy of the extracted muscle length change signals against time-series' derived from a standard, post-hoc automated tracking algorithm.MethodsWe collected B-mode ultrasound data from the soleus muscle of six participants performing five defined ankle motion tasks: (a) seated, constrained ankle plantarflexion, (b) seated, free ankle dorsi/plantarflexion, (c) weight-bearing, calf raises (d) walking, and then a (e) mix. We trained machine learning (ML) models by pairing muscle fascicle lengths obtained from standardized automated tracking software (UltraTrack) with the respective B-mode ultrasound image input to the tracker, frame-by-frame. Then we conducted hyperparameter optimizations for five different ML models using a grid search to find the best performing parameters for a combination of high correlation and low RMSE between ML and UltraTrack processed muscle fascicle length trajectories. Finally, using the global best model/hyperparameter settings, we comprehensively evaluated training-testing outcomes within subject (i.e., train and test on same subject), cross subject (i.e., train on one subject, test on another) and within/direct cross task (i.e., train and test on same subject, but different task).ResultsSupport vector machine (SVM) was the best performing model with an average r = 0.70 ±0.34 and average RMSE = 2.86 ±2.55 mm across all direct training conditions and average r = 0.65 ±0.35 and average RMSE = 3.28 ±2.64 mm when optimized for all cross-participant conditions. Comparisons between ML vs. UltraTrack (i.e., ground truth) tracked muscle fascicle length versus time data indicated that ML tracked images reliably capture the salient qualitative features in ground truth length change data, even when correlation values are on the lower end. Furthermore, in the direct training, calf raises condition, which is most comparable to previous studies validating automated tracking performance during isolated contractions on a dynamometer, our ML approach yielded 0.90 average correlation, in line with other accepted tracking methods in the field.ConclusionsBy combining B-mode ultrasound and classical ML models, we demonstrate it is possible to achieve real-time tracking of human soleus muscle fascicles across a number of functionally relevant contractile conditions. This novel sensing modality paves the way for muscle physiology in-the-loop applications that could be used to modify gait via biofeedback or unlock novel wearable device control techniques that could enable restored or augmented locomotion performance.

Project description:The aim of this work is to develop a data-driven quantitative dynamic contrast-enhanced (DCE) MRI technique using Golden-angle RAdial Sparse Parallel (GRASP) MRI with high spatial resolution and high flexible temporal resolution and pharmacokinetic (PK) analysis with an arterial input function (AIF) estimated directly from the data obtained from each patient. DCE-MRI was performed on 13 patients with gynecological malignancy using a 3-T MRI scanner with a single continuous golden-angle stack-of-stars acquisition and image reconstruction with two temporal resolutions, by exploiting a unique feature in GRASP that reconstructs acquired data with user-defined temporal resolution. Joint estimation of the AIF (both AIF shape and delay) and PK parameters was performed with an iterative algorithm that alternates between AIF and PK estimation. Computer simulations were performed to determine the accuracy (expressed as percentage error [PE]) and precision of the estimated parameters. PK parameters (volume transfer constant [Ktrans ], fractional volume of the extravascular extracellular space [ve ], and blood plasma volume fraction [vp ]) and normalized root-mean-square error [nRMSE] (%) of the fitting errors for the tumor contrast kinetic data were measured both with population-averaged and data-driven AIFs. On patient data, the Wilcoxon signed-rank test was performed to compare nRMSE. Simulations demonstrated that GRASP image reconstruction with a temporal resolution of 1 s/frame for AIF estimation and 5 s/frame for PK analysis resulted in an absolute PE of less than 5% in the estimation of Ktrans and ve , and less than 11% in the estimation of vp . The nRMSE (mean ± SD) for the dual temporal resolution image reconstruction and data-driven AIF was 0.16 ± 0.04 compared with 0.27 ± 0.10 (p < 0.001) with 1 s/frame using population-averaged AIF, and 0.23 ± 0.07 with 5 s/frame using population-averaged AIF (p < 0.001). We conclude that DCE-MRI data acquired and reconstructed with the GRASP technique at dual temporal resolution can successfully be applied to jointly estimate the AIF and PK parameters from a single acquisition resulting in data-driven AIFs and voxelwise PK parametric maps.

Dataset Information

Pressure based MRI-compatible muscle fascicle length and joint angle estimation.

Background

Methods

Results

Conclusions

Publications

Pressure based MRI-compatible muscle fascicle length and joint angle estimation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets