Dataset Information

Nanostructured Lead Sulphide Depositions by AACVD Technique Using Bis(Isobutyldithiophosphinato)Lead(II) Complex as Single Source Precursor and Its Impedance Study.

ABSTRACT: This communication reports the synthesis of bis(diisobutyldithiophosphinato)lead(II) complex and its subsequent application as a single source precursor for the nanostructured deposition of lead sulphide semiconductors and its impedance to explore its scope in the field of electronics. Synthesized complex was characterized by microelemental analysis, nuclear magnetic resonance spectroscopy, infrared spectroscopy and thermogravimetric analysis. This complex was decomposed using the aerosol-assisted chemical vapour deposition technique at different temperatures to grow PbS nanostructures on glass substrates. These nanostructures were analyzed by XRD, SEM, TEM and EDX methods. Impedance spectroscopic measurements were performed for PbS in the frequency range of 40 to 6 MHz at room temperature. In a complex impedance plane plot, two relaxation processes were exhibited due to grains and grain boundaries contribution. A high value of dielectric constant was observed at low frequencies, which was explained on the basis of Koops phenomenological model and Maxwell-Wagner type polarization. Frequency-dependent AC conductivity results were compliant with Jonscher power law, while capacitance-voltage loop had a butterfly shape. These impedance spectroscopic results have corroborated the ferroelectric nature of the resultant PbS nanodeposition.

SUBMITTER: Iram S

PROVIDER: S-EPMC7466212 | biostudies-literature | 2020 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Nanostructured Lead Sulphide Depositions by AACVD Technique Using Bis(Isobutyldithiophosphinato)Lead(II) Complex as Single Source Precursor and Its Impedance Study.

Iram Sadia S Mahmood Azhar A Sitara Effat E Batool Bukhari Syeda Aqsa SA Fatima Syeda Arooj SA Shaheen Rubina R Azad Malik Mohammad M

Nanomaterials (Basel, Switzerland) 20200723 8

This communication reports the synthesis of bis(diisobutyldithiophosphinato)lead(II) complex and its subsequent application as a single source precursor for the nanostructured deposition of lead sulphide semiconductors and its impedance to explore its scope in the field of electronics. Synthesized complex was characterized by microelemental analysis, nuclear magnetic resonance spectroscopy, infrared spectroscopy and thermogravimetric analysis. This complex was decomposed using the aerosol-assist ...[more]

PMID: 32717992

Similar Datasets

Project description:Cadmium sulfide (CdS) is an important semiconductor for electronic and photovoltaic applications, particularly when utilized as a thin film for window layers in CdTe solar cells. Deposition of thin-film CdS through the decomposition of single-source precursors is an attractive approach due to the facile, low-temperature, and rapid nature of this approach. Tailoring the precursor to affect the decomposition properties is commonly employed to tune desirable temperatures of decomposition. However, altering the precursor structure and the effect this has on the nature of the deposited material is an area far less commonly investigated. Here, we seek to investigate this by altering the ligands around the Cd metal center to increase the steric hindrance of the precursor and investigate the effect this has on the decomposition properties and the properties of deposited thin-film CdS from these precursors. For this, we report the synthesis of four CdS precursors with xanthate and pyridyl ligands ([Cd(n-ethyl xanthate)2(3-methyl pyridine)2] [1], [Cd(n-ethyl xanthate)2(3,5-lutidine)2] [2], [(Cd2(isopropyl xanthate)4(3-methyl pyridine)2)n] [3], and [Cd(isopropyl xanthate)2(3,5-lutidine)2] [4]). These single-source precursors for CdS were fully characterized by elemental analysis, NMR spectroscopy, single-crystal X-ray diffraction (XRD), and thermogravimetric analysis. It was found that even with subtle alterations in the xanthate (n-ethyl to isopropyl) and pyridine (3-methyl and 3,5-dimethyl) ligands, a range of hexa-coordinate precursors were formed (two with cis configuration, one with trans configuration, and one as a one-dimensional (1D) polymer). These four precursors were then used in aerosol-assisted chemical vapor deposition (AACVD) and spin-coating experiments to deposit eight thin films of CdS, which were characterized by Raman spectroscopy, powder X-ray diffraction, and scanning electron microscopy. Comparative quantitative information concerning film thickness and surface roughness was also determined by atomic force microscopy. Finally, the optical properties of all thin films were characterized by ultraviolet-visible (UV-Vis) absorption spectroscopy, from which the band gap of each deposited film was determined to be commensurate with that of bulk CdS (ca. 2.4 eV).

Dataset Information

Nanostructured Lead Sulphide Depositions by AACVD Technique Using Bis(Isobutyldithiophosphinato)Lead(II) Complex as Single Source Precursor and Its Impedance Study.

Publications

Nanostructured Lead Sulphide Depositions by AACVD Technique Using Bis(Isobutyldithiophosphinato)Lead(II) Complex as Single Source Precursor and Its Impedance Study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets