Dataset Information

Evaluation of a 3-Dimensional-Printed Head Simulation Technique for Teaching Flexible Nasopharyngoscopy to Radiation Oncology Residents.

ABSTRACT:

Purpose

Simulation-based medical education is an effective tool for medical teaching, but simulation-based medical education deployment in radiation oncology (RO) is limited. Flexible nasopharyngoscopy (FNP), an essential skill for RO residents, requires practice that typically occurs on volunteer patients, introducing the potential for stress and discomfort. We sought to develop a high-fidelity simulator and intervention that provides RO residents the opportunity to develop FNP skills in a low-pressure environment.

Methods and materials

Computed tomography images were used to create an anatomically accurate 3-dimensional-printed model of the head and neck region. An intervention incorporating didactic instruction, multimedia content, and FNP practice on the model was designed and administered to RO residents attending the Anatomy and Radiology Contouring Bootcamp. Participants completed pre- and postintervention evaluations of the training session and model fidelity, and self-assessments of FNP skill and confidence performing FNP. Participants were video recorded performing FNP pre- and postintervention. Videos were scored by a blinded observer on a predefined rubric. Changes in scores were evaluated using the Wilcoxon signed-rank test.

Results

Twenty-four participants from 17 institutions and 4 countries completed the intervention, 50% were women, and most were senior residents. Postintervention, FNP confidence and FNP performance improved significantly (mean ± standard deviation on a 10-point scale: 1.8 ± 1.8, P < .001; 2.2 ± 2.0, P < .001, respectively). Participants felt the model was helpful (mean ± standard deviation on a 5-point scale: 4.2 ± 0.6), anatomically correct (4.1 ± 0.9), and aided in spatial comprehension (4.3 ± 0.8). Overall satisfaction for the intervention was high (4.3 ± 0.8). Participants strongly agreed the intervention should be integrated into RO training programs (4.3 ± 0.8).

Conclusions

A 3-dimensional-printed model and associated intervention were effective at improving FNP performance and the teaching method was rated highly by participants. RO residents may benefit from broader dissemination of this technique to improve trainee performance.

SUBMITTER: Goodman CD

PROVIDER: S-EPMC7471799 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Evaluation of a 3-Dimensional-Printed Head Simulation Technique for Teaching Flexible Nasopharyngoscopy to Radiation Oncology Residents.

Goodman Christopher D CD Pautler Justin D JD Balestrini Christopher S CS Cobos Santiago S D'Souza Leah L Eansor Paige P Jaswal Jasbir J Nichols Anthony A Norris Madeleine M Sharma Manas M Willmore Katherine K Warner Andrew A Murrell Donna H DH Palma David A DA

International journal of radiation oncology, biology, physics 20200904 2

<h4>Purpose</h4>Simulation-based medical education is an effective tool for medical teaching, but simulation-based medical education deployment in radiation oncology (RO) is limited. Flexible nasopharyngoscopy (FNP), an essential skill for RO residents, requires practice that typically occurs on volunteer patients, introducing the potential for stress and discomfort. We sought to develop a high-fidelity simulator and intervention that provides RO residents the opportunity to develop FNP skills i ...[more]

PMID: 32891794

Similar Datasets

Project description:BackgroundPeripheral pulmonary lesion (PPL) incidence is rising because of increased chest imaging sensitivity and frequency. For PPLs suspicious for lung cancer, current clinical guidelines recommend tissue diagnosis. Radial endobronchial ultrasound (R-EBUS) is a bronchoscopic technique used for this purpose. It has been observed that diagnostic yield is impacted by the ability to accurately manipulate the radial probe. However, such skills can be acquired, in part, from simulation training. Three-dimensional (3D) printing has been used to produce training simulators for standard bronchoscopy but has not been specifically used to develop similar tools for R-EBUS.ObjectiveWe report the development of a novel ultrasound-compatible, anatomically accurate 3D-printed R-EBUS simulator and evaluation of its utility as a training tool.MethodsComputed tomography images were used to develop 3D-printed airway models with ultrasound-compatible PPLs of "low" and "high" technical difficulty. Twenty-one participants were allocated to two groups matched for prior R-EBUS experience. The intervention group received 15 minutes to pretrain R-EBUS using a 3D-printed model, whereas the nonintervention group did not. Both groups then performed R-EBUS on 3D-printed models and were evaluated using a specifically developed assessment tool.ResultsFor the "low-difficulty" model, the intervention group achieved a higher score (21.5 ± 2.02) than the nonintervention group (17.1 ± 5.7), reflecting 26% improvement in performance (P = 0.03). For the "high-difficulty" model, the intervention group scored 20.2 ± 4.21 versus 13.3 ± 7.36, corresponding to 52% improvement in performance (P = 0.02). Participants derived benefit from pretraining with the 3D-printed model, regardless of prior experience level.Conclusion3D-printing can be used to develop simulators for R-EBUS education. Training using these models significantly improves procedural performance and is effective in both novice and experienced trainees.

Project description:The purpose of this study was to describe our experience with 1.0T MR-SIM including characterization, quality assurance (QA) program, and features necessary for treatment planning. Staffing, safety, and patient screening procedures were developed. Utilization of an external laser positioning system (ELPS) and MR-compatible couchtop were illustrated. Spatial and volumetric analyses were conducted between CT-SIM and MR-SIM using a stereotactic QA phantom with known landmarks and volumes. Magnetic field inhomogeneity was determined using phase difference analysis. System-related, in-plane distortion was evaluated and temporal changes were assessed. 3D distortion was characterized for regions of interest (ROIs) 5-20 cm away from isocenter. American College of Radiology (ACR) recommended tests and impact of ELPS on image quality were analyzed. Combined ultrashort echotime Dixon (UTE/Dixon) sequence was evaluated. Amplitude-triggered 4D MRI was implemented using a motion phantom (2-10 phases, ~ 2 cm excursion, 3-5 s periods) and a liver cancer patient. Duty cycle, acquisition time, and excursion were evaluated between maximum intensity projection (MIP) datasets. Less than 2% difference from expected was obtained between CT-SIM and MR-SIM volumes, with a mean distance of < 0.2 mm between landmarks. Magnetic field inhomogeneity was < 2 ppm. 2D distortion was < 2 mm over 28.6-33.6 mm of isocenter. Within 5 cm radius of isocenter, mean 3D geometric distortion was 0.59 ± 0.32 mm (maximum = 1.65 mm) and increased 10-15 cm from isocenter (mean = 1.57 ± 1.06 mm, maximum = 6.26 mm). ELPS interference was within the operating frequency of the scanner and was characterized by line patterns and a reduction in signal-to-noise ratio (4.6-12.6% for TE = 50-150 ms). Image quality checks were within ACR recommendations. UTE/Dixon sequences yielded detectability between bone and air. For 4D MRI, faster breathing periods had higher duty cycles than slow (50.4% (3 s) and 39.4% (5 s), p < 0.001) and ~fourfold acquisition time increase was measured for ten-phase versus two-phase. Superior-inferior object extent was underestimated 8% (6 mm) for two-phase as compared to ten-phase MIPs, although < 2% difference was obtained for ? 4 phases. 4D MRI for a patient demonstrated acceptable image quality in ~ 7 min. MR-SIM was integrated into our workflow and QA procedures were developed. Clinical applicability was demonstrated for 4D MRI and UTE imaging to support MR-SIM for single modality treatment planning.

Dataset Information

Evaluation of a 3-Dimensional-Printed Head Simulation Technique for Teaching Flexible Nasopharyngoscopy to Radiation Oncology Residents.

Purpose

Methods and materials

Results

Conclusions

Publications

Evaluation of a 3-Dimensional-Printed Head Simulation Technique for Teaching Flexible Nasopharyngoscopy to Radiation Oncology Residents.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets