Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hybridisation of perovskite nanocrystals with organic molecules for highly efficient liquid scintillators.

ABSTRACT: Compared with solid scintillators, liquid scintillators have limited capability in dosimetry and radiography due to their relatively low light yields. Here, we report a new generation of highly efficient and low-cost liquid scintillators constructed by surface hybridisation of colloidal metal halide perovskite CsPbA₃ (A: Cl, Br, I) nanocrystals (NCs) with organic molecules (2,5-diphenyloxazole). The hybrid liquid scintillators, compared to state-of-the-art CsI and Gd₂O₂S, demonstrate markedly highly competitive radioluminescence quantum yields under X-ray irradiation typically employed in diagnosis and treatment. Experimental and theoretical analyses suggest that the enhanced quantum yield is associated with X-ray photon-induced charge transfer from the organic molecules to the NCs. High-resolution X-ray imaging is demonstrated using a hybrid CsPbBr₃ NC-based liquid scintillator. The novel X-ray scintillation mechanism in our hybrid scintillators could be extended to enhance the quantum yield of various types of scintillators, enabling low-dose radiation detection in various fields, including fundamental science and imaging.

SUBMITTER: Cho S

PROVIDER: S-EPMC7477552 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Highly Efficient Blue-Emitting CsPbBr3 Perovskite Nanocrystals through Neodymium Doping.

Project description:Colloidal CsPbX3 (X = Br, Cl, and I) perovskite nanocrystals exhibit tunable bandgaps over the entire visible spectrum and high photoluminescence quantum yields in the green and red regions. However, the lack of highly efficient blue-emitting perovskite nanocrystals limits their development for optoelectronic applications. Herein, neodymium (III) (Nd3+) doped CsPbBr3 nanocrystals are prepared through the ligand-assisted reprecipitation method at room temperature with tunable photoemission from green to deep blue. A blue-emitting nanocrystal with a central wavelength at 459 nm, an exceptionally high photoluminescence quantum yield of 90%, and a spectral width of 19 nm is achieved. First principles calculations reveal that the increase in photoluminescence quantum yield upon doping is driven by an enhancement of the exciton binding energy due to increased electron and hole effective masses and an increase in oscillator strength due to shortening of the Pb-Br bond. Putting these results together, an all-perovskite white light-emitting diode is successfully fabricated, demonstrating that B-site composition engineering is a reliable strategy to further exploit the perovskite family for wider optoelectronic applications.

| S-EPMC7578857 | biostudies-literature

Highly efficient eco-friendly X-ray scintillators based on an organic manganese halide.

Project description:Scintillation based X-ray detection has received great attention for its application in a wide range of areas from security to healthcare. Here, we report highly efficient X-ray scintillators with state-of-the-art performance based on an organic metal halide, ethylenebis-triphenylphosphonium manganese (II) bromide ((C38H34P2)MnBr4), which can be prepared using a facile solution growth method at room temperature to form inch sized single crystals. This zero-dimensional organic metal halide hybrid exhibits green emission peaked at 517 nm with a photoluminescence quantum efficiency of ~ 95%. Its X-ray scintillation properties are characterized with an excellent linear response to X-ray dose rate, a high light yield of ~ 80,000 photon MeV-1, and a low detection limit of 72.8 nGy s-1. X-ray imaging tests show that scintillators based on (C38H34P2)MnBr4 powders provide an excellent visualization tool for X-ray radiography, and high resolution flexible scintillators can be fabricated by blending (C38H34P2)MnBr4 powders with polydimethylsiloxane.

| S-EPMC7455565 | biostudies-literature

Slow cooling and highly efficient extraction of hot carriers in colloidal perovskite nanocrystals.

Project description:Hot-carrier solar cells can overcome the Schottky-Queisser limit by harvesting excess energy from hot carriers. Inorganic semiconductor nanocrystals are considered prime candidates. However, hot-carrier harvesting is compromised by competitive relaxation pathways (for example, intraband Auger process and defects) that overwhelm their phonon bottlenecks. Here we show colloidal halide perovskite nanocrystals transcend these limitations and exhibit around two orders slower hot-carrier cooling times and around four times larger hot-carrier temperatures than their bulk-film counterparts. Under low pump excitation, hot-carrier cooling mediated by a phonon bottleneck is surprisingly slower in smaller nanocrystals (contrasting with conventional nanocrystals). At high pump fluence, Auger heating dominates hot-carrier cooling, which is slower in larger nanocrystals (hitherto unobserved in conventional nanocrystals). Importantly, we demonstrate efficient room temperature hot-electrons extraction (up to ?83%) by an energy-selective electron acceptor layer within 1?ps from surface-treated perovskite NCs thin films. These insights enable fresh approaches for extremely thin absorber and concentrator-type hot-carrier solar cells.

| S-EPMC5309769 | biostudies-literature

Heterojunction Incorporating Perovskite and Microporous Metal-Organic Framework Nanocrystals for Efficient and Stable Solar Cells.

Project description:In this paper, we present a facile approach to enhance the efficiency and stability of perovskite solar cells (PSCs) by incorporating perovskite with microporous indium-based metal-organic framework [In12O(OH)16(H2O)5(btc)6]n (In-BTC) nanocrystals and forming heterojunction light-harvesting layer. The interconnected micropores and terminal oxygen sites of In-BTC allow the preferential crystallization of perovskite inside the regular cavities, endowing the derived films with improved morphology/crystallinity and reduced grain boundaries/defects. Consequently, the In-BTC-modified PSC yields enhanced fill factor of 0.79 and power conversion efficiency (PCE) of 20.87%, surpassing the pristine device (0.76 and 19.52%, respectively). More importantly, over 80% of the original PCE is retained after 12 days of exposure to ambient environment (25 °C and relative humidity of ~ 65%) without encapsulation, while only about 35% is left to the pristine device.

| S-EPMC7770709 | biostudies-literature

Efficient carrier multiplication in CsPbI3 perovskite nanocrystals.

Project description:The all-inorganic perovskite nanocrystals are currently in the research spotlight owing to their physical stability and superior optical properties-these features make them interesting for optoelectronic and photovoltaic applications. Here, we report on the observation of highly efficient carrier multiplication in colloidal CsPbI3 nanocrystals prepared by a hot-injection method. The carrier multiplication process counteracts thermalization of hot carriers and as such provides the potential to increase the conversion efficiency of solar cells. We demonstrate that carrier multiplication commences at the threshold excitation energy near the energy conservation limit of twice the band gap, and has step-like characteristics with an extremely high quantum yield of up to 98%. Using ultrahigh temporal resolution, we show that carrier multiplication induces a longer build-up of the free carrier concentration, thus providing important insights into the physical mechanism responsible for this phenomenon. The evidence is obtained using three independent experimental approaches, and is conclusive.

| S-EPMC6180104 | biostudies-literature

Electrosprayed Polymer-Hybridized Multidoped ZnO Mesoscopic Nanocrystals Yield Highly Efficient and Stable Perovskite Solar Cells.

Project description:Solid-state perovskite solar cells have been expeditiously developed since the past few years. However, there are a number of open questions and issues related to the perovskite devices, such as their long-term ambient stability and hysteresis in current density-voltage curves. We developed highly efficient and hysteresis-less perovskite devices by changing the frequently used TiO2 mesoscopic layer with polymer-hybridized multidoped ZnO nanocrystals in a common n-i-p structure for the first time. The gradual adjustment of ZnO conduction band position using single- and multidopant atoms will likely enhance the power conversion efficiency (PCE) from 8.26 to 13.54%, with PCEmax = 15.09%. The highest PCEavg of 13.54% was demonstrated by 2 atom % boron and 6 atom % fluorine co-doped (B, F:ZnO) nanolayers (using optimized film thickness of 160 nm) owing to their highest conductivity, carrier concentration, optical transmittance, and band-gap energy compared to other doped films. We also successfully apply a fine polyethylenimine thin layer on the doped ZnO nanolayers, causing the reduction in work function and overall demonstrating the enhancement in PCE from ∼10.86% up to 16.20%. A polymer-mixed electron-transporting layer demonstrates the remarkable PCEmax of 20.74% by decreasing the trap sites in the oxide layer that probably reduces the chances of carrier interfacial recombination originated from traps and thus improves the device performance. Particularly, we produce these electron-rich multidoped ZnO nanolayers via electrospray technique, which is highly suitable for the future development of perovskite solar cells.

| S-EPMC6644504 | biostudies-literature

Mitigating the Undesirable Chemical Reaction between Organic Molecules for Highly Efficient Flexible Organic Photovoltaics.

Project description:Organic photovoltaics (OPVs) with nonfullerene acceptors (NFAs) feature excellent device performance and device stability. However, they are facing problems when the amine-rich polyelectrolytes are used as cathode interfacial layers. In this work, a small molecule, ethanedithiol (EDT) at the polyethyleneimine ethoxylated (PEIE)/active layer interface is inserted for mitigating the undesirable reaction between amine-rich groups and electron-acceptor moieties in NFA. The main role of EDT is to passivate the PEIE surface and prevent electron flow to NFA and the unwanted reaction can be mitigated. It improves the performance of OPV devices by reducing the work function, decreasing trap-assisted recombination, and improving electron-mobility. As a result, the flexible device with the PEIE interfacial layer with a power conversion efficiency (PCE) of 7.20% can be improved to 10.11% after the inclusion of EDT. Moreover, EDT-modified device can retain 98.18% after it is bent for 200 cycles and can maintain 80.83% of its initial PCE under continuous light illuminated in ambient conditions without any encapsulation. Based on these findings, the proposed strategy constitutes a crucial step toward highly efficient flexible OPVs.

| S-EPMC8292892 | biostudies-literature

Formamidinium Lead Halide Perovskite Nanocomposite Scintillators.

Project description:While there is great demand for effective, affordable radiation detectors in various applications, many commonly used scintillators have major drawbacks. Conventional inorganic scintillators have a fixed emission wavelength and require expensive, high-temperature synthesis; plastic scintillators, while fast, inexpensive, and robust, have low atomic numbers, limiting their X-ray stopping power. Formamidinium lead halide perovskite nanocrystals show promise as scintillators due to their high X-ray attenuation coefficient and bright luminescence. Here, we used a room-temperature, solution-growth method to produce mixed-halide FAPbX3 (X = Cl, Br) nanocrystals with emission wavelengths that can be varied between 403 and 531 nm via adjustments to the halide ratio. The substitution of bromine for increasing amounts of chlorine resulted in violet emission with faster lifetimes, while larger proportions of bromine resulted in green emission with increased luminescence intensity. By loading FAPbBr3 nanocrystals into a PVT-based plastic scintillator matrix, we produced 1 mm-thick nanocomposite scintillators, which have brighter luminescence than the PVT-based plastic scintillator alone. While nanocomposites such as these are often opaque due to optical scattering from aggregates of the nanoparticles, we used a surface modification technique to improve transmission through the composites. A composite of FAPbBr3 nanocrystals encapsulated in inert PMMA produced even stronger luminescence, with intensity 3.8× greater than a comparative FAPbBr3/plastic scintillator composite. However, the luminescence decay time of the FAPbBr3/PMMA composite was more than 3× slower than that of the FAPbBr3/plastic scintillator composite. We also demonstrate the potential of these lead halide perovskite nanocomposite scintillators for low-cost X-ray imaging applications.

| S-EPMC9268382 | biostudies-literature

Nanostructured organosilicon luminophores and their application in highly efficient plastic scintillators.

Project description:Organic luminophores are widely used in various optoelectronic devices, which serve for photonics, nuclear and particle physics, quantum electronics, medical diagnostics and many other fields of science and technology. Improving their spectral-luminescent characteristics for particular technical requirements of the devices is a challenging task. Here we show a new concept to universal solution of this problem by creation of nanostructured organosilicon luminophores (NOLs), which are a particular type of dendritic molecular antennas. They combine the best properties of organic luminophores and inorganic quantum dots: high absorption cross-section, excellent photoluminescence quantum yield, fast luminescence decay time and good processability. A NOL consists of two types of covalently bonded via silicon atoms organic luminophores with efficient Förster energy transfer between them. Using NOLs in plastic scintillators, widely utilized for radiation detection and in elementary particles discoveries, led to a breakthrough in their efficiency, which combines both high light output and fast decay time. Moreover, for the first time plastic scintillators, which emit light in the desired wavelength region ranging from 370 to 700?nm, have been created. We anticipate further applications of NOLs as working elements of pulsed dye lasers in photonics, optoelectronics and as fluorescent labels in biology and medical diagnostics.

| S-EPMC4189022 | biostudies-literature

Highly efficient photon detection systems for noble liquid detectors based on perovskite quantum dots.

Project description:Wavelength shifting photon detection systems (PDS) are the critical functioning components in noble liquid detectors used for high energy physics (HEP) experiments and dark matter search. The vacuum ultraviolet (VUV) scintillation light emitted by these Liquid argon (LAr) and liquid Xenon (LXe) detectors are shifted to higher wavelengths resulting in its efficient detection using the state-of-the-art photodetectors such as silicon photomultipliers (SiPM). The currently used organic wavelength shifting materials [such as 1,1,4,4 Tetraphenyl Butadiene (TPB)] have several disadvantages and are unreliable for longterm use. In this study, we demonstrate the application of the inorganic perovskite cesium lead bromide (CsPbBr3) quantum dots (QDs) as highly efficient wavelength shifters. The absolute photoluminescence quantum yield of the PDS fabricated using these QDs exceeds 70%. CsPbBr3-based PDS demonstrated an enhancement in the SiPM signal enhancement by up to 3 times when compared to a 3 µm-thick TPB-based PDS. The emission spectrum from the QDs was optimized to match the highest quantum efficiency region of the SiPMs. In addition, we have demonstrated the deposition of the QD-based wavelength shifting material on a large area PDS substrate using low capital cost and widely scalable solution-based techniques providing a pathway appropriate for meter-scale PDS fabrication and widespread use for other wavelength shifting applications.

| S-EPMC7547111 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data