Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Properties, X-ray data and 2D WAXD fitting procedures of melt-spun poly(?-caprolactone).

ABSTRACT: Rheological and thermal properties of the poly(?-caprolactone) (PCL) polymer are presented in Section 1.1. Section 1.2 summarizes results of melt-spun PCL filaments. Specifically, we show the necking point stabilization during high-speed online drawing in Section 1.2.1, filament morphology in Section 1.2.2, wide-angle X-ray diffraction (WAXD) fitting results in Section 1.2.3, WAXD patterns of aged fibers in Section 1.2.4, crystallinity analysis in Section 1.2.5 and small-angle X-ray scattering (SAXS) analysis results in Section 1.2.6. Details about the materials, experimental and analytical methods are given in Section 2. Of particular interest may be the simulation and fitting procedures of 2D WAXD patterns, which are summarized in Section 2.7.2. For more information see the publication by Selli et al. 'Mesophase in melt-spun poly(?-caprolactone) filaments: structure-mechanical property relationship' [1].

SUBMITTER: Selli F

PROVIDER: S-EPMC7479331 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Properties, X-ray data and 2D WAXD fitting procedures of melt-spun poly(ɛ-caprolactone).

Selli F F Gooneie A A Erdoğan U H UH Hufenus R R Perret E E

Data in brief 20200824

Rheological and thermal properties of the poly(ɛ-caprolactone) (PCL) polymer are presented in Section 1.1. Section 1.2 summarizes results of melt-spun PCL filaments. Specifically, we show the necking point stabilization during high-speed online drawing in Section 1.2.1, filament morphology in Section 1.2.2, wide-angle X-ray diffraction (WAXD) fitting results in Section 1.2.3, WAXD patterns of aged fibers in Section 1.2.4, crystallinity analysis in Section 1.2.5 and small-angle X-ray scattering ( ...[more]

PMID: 32939379

Similar Datasets

Controlling Topography and Crystallinity of Melt Electrowritten Poly(ɛ-Caprolactone) Fibers.

Project description:Melt electrowriting (MEW) is an aspiring 3D printing technology with an unprecedented resolution among fiber-based printing technologies. It offers the ability to direct-write predefined designs utilizing a jet of molten polymer to fabricate constructs composed of fibers with diameters of only a few micrometers. These dimensions enable unique construct properties. Poly(ɛ-caprolactone) (PCL), a semicrystalline polymer mainly used for biomedical and life science applications, is the most prominent material for MEW and exhibits excellent printing properties. Despite the wealth of melt electrowritten constructs that have been fabricated by MEW, a detailed investigation, especially regarding fiber analysis on a macro- and microlevel is still lacking. Hence, this study systematically examines the influence of process parameters such as spinneret diameter, feeding pressure, and collector velocity on the diameter and particularly the topography of PCL fibers and sheds light on how these parameters affect the mechanical properties and crystallinity. A correlation between the mechanical properties, crystallite size, and roughness of the deposited fiber, depending on the collector velocity and applied feeding pressure, is revealed. These findings are used to print constructs composed of fibers with different microtopography without affecting the fiber diameter and thus the macroscopic assembly of the printed constructs.

| S-EPMC9828622 | biostudies-literature

Electrospun chitosan-graft-poly (ɛ-caprolactone)/poly (ɛ-caprolactone) nanofibrous scaffolds for retinal tissue engineering.

Project description:A promising therapy for retinal diseases is to employ biodegradable scaffolds to deliver retinal progenitor cells (RPCs) for repairing damaged or diseased retinal tissue. In the present study, cationic chitosan-graft-poly(ɛ-caprolactone)/polycaprolactone (CS-PCL/PCL) hybrid scaffolds were successfully prepared by electrospinning. Characterization of the obtained nanofibrous scaffolds indicated that zeta-potential, fiber diameter, and the content of amino groups on their surface were closely correlated with the amount of CS-PCL in CS-PCL/PCL scaffolds. To assess the cell-scaffold interaction, mice RPCs (mRPCs) were cultured on the electrospun scaffolds for 7 days. In-vitro proliferation assays revealed that mRPCs proliferated faster on the CS-PCL/PCL (20/80) scaffolds than the other electrospun scaffolds. Scanning electron microscopy and the real-time quantitative polymerase chain reaction results showed that mRPCs grown on CS-PCL/PCL (20/80) scaffolds were more likely to differentiate towards retinal neurons than those on PCL scaffolds. Taken together, these results suggest that CS-PCL/PCL(20/80) scaffolds have potential application in retinal tissue engineering.

| S-EPMC3075910 | biostudies-literature

Fitting of 2D WAXD data: Mesophases in polymer fibers.

Project description:This data article presents fitting results of wide-angle x-ray diffraction (WAXD) patterns of melt-spun polymer fibers from amorphous materials (polycarbonate (PC), cyclo-olefin polymer (COP), copolyamide (coPA), polyethylene terephthalate glycol (PETG)) and semi-crystalline materials (polyethylene terephthalate (PET), poly-3-hydroxybutyrate(P3HB)). The data was fit using the fitting algorithms, previously described in the publication by Perret and Hufenus 'Insights into strain-induced solid mesophases in melt-spun polymer fibers' [1]. Fitting results of WAXD data and details about azimuthal, equatorial, meridional or off-axis profiles are presented in sections 1.1-1.2. SAXS patterns of fibers, melt-spun from amorphous materials, are shown in section 1.3. Fiber production parameters are given in section 2.1, and a description of the WAXD measurements and fitting details, e.g., the chosen fitting parameters, are given in section 2.2.

| S-EPMC8521234 | biostudies-literature

Process-Property Relationships for Melt-Spun Poly(lactic acid) Yarn.

Project description:Poly(lactic acid) (PLA) is an attractive biomaterial due to its biocompatibility, biodegradability, and fiber-forming ability. However, the polymer is highly susceptible to both hydrolytic and thermal degradation during processing. Melt processing conditions typically involve high temperature and shear, whereas to prevent premature degradation, PLA needs to be processed under the mildest conditions that still yield the desired yarn properties. Thus, there is a need to determine the optimum processing conditions to achieve the desired properties of extruded PLA yarn. This study focuses on the effect of melt-spinning process parameters on the mechanical and physicochemical properties of the resulting PLA yarn and to derive their process-property relationships. The study compares the effect of process parameters like melt temperature, throughput through the spinneret, take-up speed at the wind-up roller, draw ratio, and drawing temperature on the yarn properties such as the yarn size (linear mass density), tenacity, elongation at break, crystallinity, and molecular weight. Depending on the combination of process parameters, the resulting PLA yarn had a yarn size ranging from 6.2 to 101.6 tex, tenacity ranging from 2.5 to 34.1 gf/tex, elongation at break ranging from 4 to 480%, and degree of crystallinity ranging from 14.6 to 62.2%. Certain combinations of processing parameters resulted in higher process-induced degradation, as evident from the reduction in molecular weight, ranging from 7.6% reduction to 20.5% reduction. Findings from this study increase our understanding on how different process parameters can be utilized to achieve the desired properties of the as-spun and drawn PLA yarn while controlling process-induced premature degradation.

| S-EPMC8223423 | biostudies-literature

X-ray data about the structural response of melt-spun poly(3-hydroxybutyrate) fibers to stress and temperature.

Project description:Mechanical properties of as-spun, aged and stress-annealed melt-spun poly(3-hydroxybutyrate) (P3HB) fibers are presented in section 1.1. Section 1.2 presents tables with stress/temperature conditions and exposure times during in-situ laboratory WAXD and SAXS experiments, and section 1.3 presents azimuthal profiles of the corresponding WAXD patterns with extracted orientation factors of the α-crystals. Section 1.4 presents the extracted long-spacings, coherence lengths and crystal sizes from SAXS patterns. The corresponding fits of meridional and transversal SAXS profiles are shown in sections 1.5 and 1.6, respectively. In-situ synchrotron measurements during tensile drawing of differently pre-annealed P3HB fibers are presented in section 1.7. A detailed description of the tensile, SAXS/WAXD measurements and analysis is given in the experimental section 2. The laboratory SAXS/WAXD measurements during stress annealing were performed with a Bruker Nanostar U diffractometer (Bruker AXS, Karlsruhe, Germany) and a heating stage H+300 (Bruker AXS, Germany). Different weights were attached to the fibers during heating to apply stress. The synchrotron measurements during tensile drawing were performed at the cSAXS beamline at the Swiss Light Source of the Paul Scherrer Institute in Switzerland. The fibers were drawn with a TS 600 tensile stage (Anton Paar GmbH, Austria) using a 5 N load cell. For more information see 'Structural response of melt-spun poly(3-hydroxybutyrate) fibers to stress and temperature' [1].

| S-EPMC7240330 | biostudies-literature

X-ray data from a cyclic tensile study of melt-spun poly(3-hydroxybutyrate) P3HB fibers: A reversible mesophase.

Project description:Wide-angle x-ray diffraction (WAXD) patterns that show mesophases in core-sheath bicomponent fibers and amorphous fibers are presented in section 1.1 of the article. Section 1.2 presents molecular dynamics simulations and scattered intensity calculations of stretched P3HB chains. Sections 1.3-1.6 summarize WAXD and small-angle x-ray scattering (SAXS) data analysis from a tensile study of melt-spun P3HB fibers. Azimuthal profiles are extracted from 2D WAXD patterns at various angular regions and the positions of equatorial reflections and corresponding d-spacings are summarized. Additionally, the extracted structural parameters from SAXS images are summarized. The tensile stress calculations, crystal orientation calculations, applied intensity corrections, calculations of long spacings, coherence lengths and lamellar diameters are explained in the methods subsections 2.3.1-2.3.7. WAXD and SAXS measurements of P3HB fibers were recorded on a Bruker Nanostar U diffractometer (Bruker AXS, Karlsruhe, Germany). The recorded WAXD/SAXS patterns were analyzed with the evaluation software DIFFRAC.EVA (version 4.2., Bruker AXS, Karlsruhe, Germany) and python codes. For more information see 'Tensile study of melt-spun poly(3-hydroxybutyrate) P3HB fibers: Reversible transformation of a highly oriented phase' (Perret et al., 2019).

| S-EPMC6722231 | biostudies-literature

Structure-Property Relationship in Melt-Spun Poly(hydroxybutyrate-co-3-hexanoate) Monofilaments.

Project description:Poly(hydroxybutyrate-co-3-hexanoate) (PHBH) is a biodegradable thermoplastic polyester with the potential to be used in textile and medical applications. We have aimed at developing an upscalable melt-spinning method to produce fine biodegradable PHBH filaments without the use of an ice water bath or offline drawing techniques. We have evaluated the effect of different polymer grades (mol% 3-hydroxy hexanoate, molecular weight etc.) and production parameters on the tensile properties of melt-spun filaments. PHBH monofilaments (diameter < 130 µm) have been successfully melt-spun and online drawn from three different polymer grades. We report thermal and rheological properties of the polymer grades as well as morphological, thermal, mechanical, and structural properties of the melt-spun filaments thereof. Tensile strengths up to 291 MPa have been achieved. Differences in tensile performance have been correlated to structural differences with wide-angle X-ray diffraction and small-angle X-ray scattering. The measurements obtained have revealed that a synergetic interaction of a highly oriented non-crystalline mesophase with highly oriented α-crystals leads to increased tensile strength. Additionally, the effect of aging on the structure and tensile performance has been investigated.

| S-EPMC8747132 | biostudies-literature

Poly(ɛ-caprolactone)/gelatin composite electrospun scaffolds with porous crater-like structures for tissue engineering.

Project description:Electrospinning has been widely used to fabricate scaffolds imitating the structure of natural extracellular matrix (ECM). However, conventional electrospinning produces tightly compacted nanofiber layers with only small superficial pores and a lack of bioactivity, which limit the usefulness of electrospinning in biomedical applications. Thus, a porous poly(ε-caprolactone) (PCL)/gelatin composite electrospun scaffold with crater-like structures was developed. Porous crater-like structures were created on the scaffold by a gas foaming/salt leaching process; this unique fiber structure had more large pore areas and higher porosity than the conventional electrospun fiber network. Various ratios of PCL/gelatin (concentration ratios: 100/0, 75/25, and 50/50) composite electrospun scaffolds with and without crater-like structures were characterized by their microstructures, surface chemistry, degradation, mechanical properties, and ability to facilitate cell growth and infiltration. The combination of PCL and gelatin endowed the scaffold with both structural stability of PCL and bioactivity of gelatin. All ratios of scaffolds with crater-like structures showed fairly similar surface chemistry, degradation rates, and mechanical properties to equivalent scaffolds without crater-like structures; however, craterized scaffolds displayed higher human mesenchymal stem cell (hMSC) proliferation and infiltration throughout the scaffolds after 7-day culture. Therefore, these results demonstrated that PCL/gelatin composite electrospun scaffolds with crater-like structures can provide a structurally and biochemically improved three-dimensional ECM-mimicking microenvironment.

| S-EPMC5206917 | biostudies-literature

Phase Transition and Melt-Recrystallization Behavior of Poly(Butylene Adipate) Investigated by Simultaneous Measurements of Wide-Angle X-Ray Diffraction (WAXD) and Differential Scanning Calorimetry (DSC).

Project description:Simultaneous measurements of wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) were carried out to investigate the phase transition and melting behaviors of poly(butylene adipate) (PBA). Thermal expansion changes along the a and b axes of the β form unit cell are different from each other during the heating process. At the beginning of the β to αH (high-temperature α phase) phase transition, the β phase melts very fast, while the recrystallization of the αH phase is delayed and slowed. With the further increment of the temperature, the melting rate of the β phase slows down, while the recrystallization of the αH phase accelerates. The diffraction peak intensity ratios of the β(020):β(110) and αH(020):αH(110) diffraction peaks during the first heating process have similar value. However, the above value is different from the value of α(020):α(110) during the following melt-crystallization process. This difference comes from the different orientations of the crystal lattices of the α and αH(β) crystals to the substrate plane, which indicates that the αH phase inherits the orientation of the β phase during phase transition and the orientation of αH form crystals is different from the α form crystals that crystallized from the melt.

| S-EPMC7023612 | biostudies-literature

Gelatinase-stimuli strategy enhances the tumor delivery and therapeutic efficacy of docetaxel-loaded poly(ethylene glycol)-poly(ɛ-caprolactone) nanoparticles.

Project description:Nanoscale drug carriers have been extensively developed to improve drug therapeutic efficiency. However, delivery of chemotherapeutic agents to tumor tissues and cells has not been favorably managed. In this study, we developed a novel "intelligent" nanoparticle, consisting of a gelatinase-cleavage peptide with poly(ethylene glycol) (PEG) and poly(ɛ-caprolactone) (PCL)-based structure for tumor-targeted docetaxel delivery (DOC-TNPs). The docetaxel-loaded PEG-PCL nanoparticles (DOC-NPs) that did not display gelatinase-stimuli behaviors were used as a control. We found clear evidence that the DOC-TNPs were transformed by gelatinases, allowing drug release and enhancing the cellular uptake of DOC (P < 0.01). In vivo biodistribution study demonstrated that targeted DOC-TNPs could accumulate and remain in the tumor regions, whereas non-targeted DOC-NPs rapidly eliminated from the tumor tissues. DOC-TNPs exhibited higher tumor growth suppression than commercialized Taxotere(®) (docetaxel; Jiangsu Hengrui Medicine Company, Jiangsu, China) and DOC-NPs on hepatic H22 tumor model via intravenous administration (P < 0.01). Both in vitro and in vivo experiments suggest that the gelatinase-mediated nanoscale delivery system is promising for improvement of antitumor efficacy in various overexpressed gelatinase cancers.

| S-EPMC3265997 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data